• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.473-478
• /
• 2003

Numerical study was made on the flow characteristics around a circular pipeline between parallel walls. The incompressible Navier-Stokes equations were solved by using a third-order upwind differential scheme. When the distance near a wall is small enough, the vortex shedding is almost completely suppressed because of the interaction with the wall boundary layer separation. This study aims to clarify the characteristics of the vortex shedding regime as the body approaches a wall as Reynolds number varies. The feature of separated vorticity dynamics is analyzed at different conditions with particular attention to the interaction between the pipeline wake and the induced separation on the plane walls.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.81-86
• /
• 2012

In this paper, we proposed a new design methodology of a pattern classification rule based on the local linear discriminant analysis expanded from the generic linear discriminant analysis which is used in the local area divided from the whole input space. There are two ways such as k-Means clustering method and the differential evolutionary algorithm to partition the whole input space into the several local areas. K-Means clustering method is the one of the unsupervised clustering methods and the differential evolutionary algorithm is the one of the optimization algorithms. In addition, the experimental application covers a comparative analysis including several previously commonly encountered methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.101-112
• /
• 2004

In this paper, we developed a numerical analysis model by using ADI-FDTD method to analyze three-dimensional interconnect structure. We discretized maxwell's curl equation by using ADI-FDTD. Using ADI-FDTD method, a sampler circuit designed from 3.3 V CMOS technology is simplified to 3-metal line structure. Using this simplified structure, the time delay and signal distortion of complex interconnects are investigated. As results of simulation, 5∼10 ps of delay time and 0.1∼0.2 V of signal distortion are measured. As demonstrated in this paper, the full-wave analysis using ADI-FDTD exhibits a promise for accurate modeling of electromagnetic phenomena in high-speed VLSI interconnect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.345-351
• /
• 2000

In this paper, we design and analyze a Ka-band microstrip line to rectangular waveguide transition using the expanding-cell FDTD method. The transition under investigation consists of a ridged waveguide, microstrip line, and $\lambda$/4 Chebyshev impedance transformer. To improve the accuracyand efficiency, the expanding-cell FDTD method is applied to analyze the characteristics of a ridged waveguide impedance transformer. To verify the accuracy of the expanding-cell FDTD method, S parameters of the analyzed transition are compared with those of experimental data. The efficiency of the present approach is verified by comparing the computational time for expanding-cell and that for fine cell. The relation between the number of step and operation bandwidth is analyzed by comparing the characteristics of four and three step Chebyshev waveguide impedance transformer.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.871-878
• /
• 2012

LBlock is a 64-bit ultra-light block cipher suitable for the constrained environments such as wireless sensor network environments. In this paper, we propose a differential fault analysis on LBlock. Based on a random nibble fault model, our attack can recover the secret key of LBlock by using the exhaustive search of $2^{25}$ and five random nibble fault injection on average. It can be simulated on a general PC within a few seconds. This result is superior to known differential fault analytic result on LBlock.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.40-41
• /
• 2011

동해를 전파하는 지진해일은 세계적으로 다른 지역에서 발생하는 지진해일과 비교하였을 때 상대적으로 파장이 짧고, 이에 비해 먼 거리를 전파한다. 그러므로 동해에서 발생한 지진해일의 전파에 대한 해석을 수행할 때 물리적인 분산효과가 매우 중요하다. 따라서 지배방정식으로 분산 효과가 충분히 고려된 선형 Boussinesq 방정식을 사용한다. 기존의 연구에서는 leap-frog 기법을 사용하여 선형 천수방정식을 차분할 때 발생하는 수치분산항에 분산 보정계수를 이용하여 선형 Boussinesq 방정식의 물리적 분산항과 같은 형태로 나타나도록 유도하여 수치모의를 수행하였다. 그러나 기존에 사용한 지배방정식은 수심이 일정하다는 가정을 통하여 유도된 것으로, 수심에 변화가 있는 실제 지형을 통과하는 지진해일에 대한 수치모의를 수행한 결과의 정확도에 문제가 생길 수 있다. 본 연구에서는 기존의 연구에서 발생할 수 있는 수심 변화에 따른 오류를 개선하기 위하여 바닥 지형이 1차원으로 변한다는 가정을 이용하여 지배방정식을 유도하였으며, 이로 인해 발생하는 수심 변화가 고려된 항을 기존의 분산보정기법에 추가하였다. 그리고 적용성을 높이기 위하여 수치모의 기법의 제한을 최소화하는 연구를 진행하였다. 본 연구에서 제안한 수정 기법이 수심이 변화하는 지형을 전파하는 지진해일 수치모의 과정에서 경사에 대한 분산효과가 충분히 고려되는지 확인하기 위하여 Gaussian hump를 이용한 가상 지진해일을 원형 천퇴 지형에 통과시켰다. 본 연구에서 사용한 지형을 통과하는 Gaussian hump에 대한 해석해를 구하는 방법이 존재하지 않으므로, Boussinesq 방정식을 직접 차분하여 푸는 FUNWAVE를 사용하여 동일한 조건 하에서 수치모의를 수행하였다. 비교 결과를 통하여 본 연구에서 제안한 기법의 정확도 향상을 확인하게 되면, 실제 지형을 통과하는 지진해일의 수치모의에 대한 활용성을 높일 수 있을 것이다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.2
• /
• pp.20-25
• /
• 2011

In this paper, two dimensional concrete slabs for a railroad bridge were analyzed by the specially orthotropic laminates theory. Both the geometrical and material property of the cross section of the slab was considered symmetrically with respect to the neutral surface so that the bending extension coupling stiffness, $B_{ij}$ = 0, and $D_{16}=D_{26}=0$ Bridge deck behaves as specially orthotropic plates. In general, the analytical solution for such complex systems is very difficult to obtain. Thus, finite difference method was used for analysis of the problem. In this paper, the finite difference method and the beam theory were used for analysis.

• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.233-240
• /
• 2008

Conventionally, the second-order self-adjoint neutron transport equations have been studied using the even parity and the odd parity equations. Recently, however, the SAAF(self-adjoint angular flux) form of neutron transport equation has been introduced as a new option for the second-order self-adjoint equations. In this paper we validated the SAAF equation mathematically and clarified how it relates with the existing even and odd parity equations. We also developed a second-order SAAF differencing formula including DSA(diffusion synthetic acceleration) from the first-order difference equations. Numerical result is attached to show that the proposed methods increases accuracy with effective computational effort.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1997

Subsea cable systems have a large information transmission capacity and play an important role in domestic and global information networks. However since the cables are under harsh marine environment, they are exposed to various hazards with high potential risks of damage resulting in serious economic loss. In this research a computer simulation program based on the finite difference algorithm was developed. The program is able to simulate two dimensional dynamic behaviour of a submarine cable during its laying. In order to verify the numerical results, they are compared to analytical results, showing a good agreement between the two results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1975-1984
• /
• 1997

In this paper, we analyzed the frequency characteristics and the crosstalk of the adjacent parallel lines and the crossed lines in high-speed packaging interconnections by using the three-dimensional finite difference time domain (3D FDTD) method. To analyze the actual crosstalk phenomena in the transmission of the high-speed digital sgnal, the step pulse with fast rise time was used for the source excitation signal instead of using the Gaussian pulse that is generally used in FDTD. To veify the theoretical resutls, the experimental interconnection lines that were fabricated on the Duroid substrate($\varepsilon_{r}$=2.33, h=0.787 [mm]) were tested by TDR(time domain reflectometry). The results show good agreement between the analyzed results and the tested outcomes.