• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.367-372
• /
• 2000

국내 도시 철도에 차량 견인용으로 사용되는 전동기는 인버터로 구동되는 200㎾급 3상농형 유도 전동기를 표준 사양으로 선정하였으며 열악한 운전 조건에서도 20년을 상회하는 운전 수명을 보장하도록 규정하고 있다. 그러나 PWM 인버터 구동은 견인 전동기에서 추가적인 고조파 발열 손실과 소음, 진동을 초래하며 더욱이 고속 스위칭에 의한 과도 전압과 빠른 상승 시간을 가진 반복 과전압은 인버터와 전동기를 연결하는 케이블 공진 현상에 의해 배가되어 정현파 구동 시에 예상할 수 없었던 매우 커다란 스트레스를 절연 시스템에 가하게 되어 견인 전동기의 예상 수명에 심각한 영향을 미치고 있다. 따라서 본 연구에서는 인버터 구동 견인전동기의 운전수명을 보장하기 위해서는 기존의 시험 방법에 포함되지 않은 PWM 가변속 구동에 따른 고조파 손실과 과도 전압 충격의 문제점을 고려한 새로운 장기 신뢰성 평가기법이 절실히 필요한 상황이기 때문에 이를 제안하고자 하였다.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.47-55
• /
• 2011

The purpose of this study was to determine the legibility distance for traffic road sign and traffic sign, fixation duration and number of fixation during the time of recognition of traffic road signs under different vision conditions. This experiment was conducted on a closed-road circuit which has realistic driving road and environment Each participant drove the real vehicle for the experiment and specially built traffic road sign for the experiment and traffic road signs on the side of closed-road circuit were used. Different vision conditions were simulated using spectacle lenses to reach visual acuity 1.0 and 0.8 and it was 1.2 without spectacles and each participant tested under 3 vision conditions.. The result of this study demonstrated that there was a significant difference on legibility distance between visual acuity of 1.2 and 0.8 and there were also significant difference on fixation duration and number of fixations with smaller traffic signs. This study demonstrated the importance of vision correction for driving at night-time, also showed there would be difference on legibility distance and efficiency of eye movement such as fixation duration and number of fixation despite of satisfied visual acuity for driver's license requirement.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.70-82
• /
• 2022

At the current stage of a semi-autonomous vehicle, there are situations in which the vehicle has to request take-over control to the driver quickly. However, current self-driving cars use only simple messages and warning sounds to notify drivers when handing over control, so they do not adequately convey considerations of individual characteristics or explanations of various emergent situations. This study investigated how visual and auditory information and the efficacy of drivers in self-driving cars can improve efficient take-over requests between the car and the driver. We found that there were significant differences in driver's cognitive load, reliability, safety, usability, and usefulness according to the combination of three visual and auditory information provided in the experiment of the take-over request situation. The results of this study are expected to help design self-driving vehicles that can communicate more safely and efficiently with drivers in urgent control transition situations.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2015

Electrical door system is one of the most essential items for the successful commercial operation of the railway vehicles. Nowadays, reliability values of electrical door system have a tendency to be included in technical requirements for design and manufacturing of rolling stocks. Manufacturer shall meet the reliability target values of electrical door system which is proposed by railway operator in procurement contract book. Railway operator shall approve the supplier's the reliability target values based on maintenance operation data. Railway operators are in the transition stage from the framework of maintenance interval based on time to the framework of maintenance interval based on distance. In this study, failure rates of the electrical door system currently used in railway vehicles are collected from maintenance field data. Failure rates are analyzed by using Minitab. Several kinds of plan for improving reliability are also suggested. It is necessary to keep studying on reliability prediction methodology, applying it in the field and implementing on improvement of reliability through feedback as well. Further, it will be useful for determining new maintenance policies or changing maintenance intervals for existing railway vehicles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1448-1451
• /
• 2008

VANET(Vehicle Ad-hoc Network)은 통신 기능을 지원하는 지능형 차량들로 이루어진 애드혹 네트워크 환경으로써 최근 들어서 그 연구가 매우 활발하게 진행되고 있는 분야이다. VANET은 원활한 교통 소통, 사고 방지 등 여러 가지 편리한 기능들을 제공하지만, 그 기반을 애드혹 네트워크에 두고 있기 때문에 애드혹 네트워크에서 발생할 수 있는 보안 문제가 그대로 발생하며, 또한 그 환경적 특성에 따라 추가적인 보안 요구사항 역시 존재한다. VANET 환경에서 가장 중요하게 요구되는 보안요소는 협력 운전(cooperative driving) 시 메시지 인증, 무결성, 부인방지 등과 특정 차량에 대한 추적을 할 수 없도록 하는 위치 프라이버시 보호이다. 그러나 이 가운데 사용자의 위치 프라이버시는 조건적으로 신뢰기관에 의한 추적 역시 가능해야 한다는 조건을 포함한다. 본 논문에서는 L. Martucci 등이 제안한 자체적으로 생성하고 인증하는 pseudonym 기법[1]을 이용하여 이러한 보안 요구사항들을 만족시키는 방법을 제안하고자 한다. 제안하는 기법은 최초 차량 등록 시 받은 비밀 인자를 이용하여 보안 통신을 하며 추가적으로 신뢰 기관으로의 통신이 필요하지 않는 효율적인 보안 기법이다. 또한 기존 연구에서 발생했던 저장 공간의 문제, RSU(Road Side Unit) 접근 문제 등을 해결한다.

• Journal of the Korean Institute of Gas
• /
• v.13 no.5
• /
• pp.1-6
• /
• 2009

This paper presents the fuel consumption effects of LPG vehicle depending on the atmospheric temperature, LP gas leakage of vaporizer, viscosity of engine oil and engine load conditions. The fuel consumption test results show that when the temperature of engine temperature rises, the fuel consumption efficiency increases in general. The fuel consumption efficiency for an atmosphere temperature of $24.2^{\circ}C$ is 13.6% high compared to that of $1^{\circ}C$. No leak vaporizer on fuel consumption efficiency is 5.3% high compared to that of the LP gas leak vaporizer. The fuel economy of new engine oils is just 1.1% high compared to that of used oils with a LPG vehicle mileage of 9,500km. This is not an influential factor compared with an atmospheric temperature and a LP gas leakage. The more important factors on the fuel consumption efficiency are driving conditions such as a rapid braking, abrupt start and fast acceleration. The test results indicate that the normal start is 32.3% high compared to that of an abrupt start and the fast acceleration is 10.8% high compared with that of an abrupt start. And the fuel consumption efficiency for a rapid braking is 18.3% higher than that of an abrupt start. These indicate that the driving condition is very important to reduce the fuel consumption rate.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1085-1090
• /
• 2011

To assure the safety of rolling stock, it is important to perform the fatigue analysis of reduction gear unit in rolling stock considering a variation of velocity and traction motor capability. This paper presents fatigue analysis of the damage of reduction gear unit of railway vehicle under variable amplitude loading(VAL) based on quasi-static fatigue analysis using finite element model and linear Miner's rule. The VAL for the simulation was constructed from the tractive effort curve and train run curves of railway vehicle under commercial operation condition using MSC.ADAMS dynamic analysis. The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the middle gear based on strain-life based approach. The results showed that the frequent high starting torque due to a quick start as well as increasing numbers of stops at station would decrease the fatigue life of reduction gear unit.

• Korean Journal of Culture and Social Issue
• /
• v.15 no.2
• /
• pp.319-338
• /
• 2009

This study was intended to recognize whether speed desire frustration influences in driving stress. Stress desire frustration is the difference between prefer speed and normal speed. As a result, driver's the prefer speed is higher than the normal speed on 4 road condition(high-way, urban-way, residential-way, rural-way). Also, driver's speed desire frustration caused statistical effect in driving stress on 4 road condition. speed desire frustration effect Driving Stress Scale(DSS) 5 sub-scale factors(progress obstacle, traffic circumstance, accident & regulation, regulation obedience, time pressure). This is that driver who experience much speed desire frustration creates high driving stress. Speed desire frustration analyzed high driver and low driver's Driving Stress Scale(DSS) score and overspeed regulation and traffic accident experience difference. As analysis result, speed desire frustration high driver driving stress high appear. However, difference of overspeed regulation experience or traffic accident experience by speed desire frustration did not appear.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.34-35
• /
• 2007

본 논문에서는 연료전지 전기자동차(Fuel Cell Electric Vehicle)의 동력성능을 만족하면서 연비효율 향상을 목적으로 하는 견인전동기 시스템의 설계특성에 대하여 살펴본다. 특히, 차량의 요구 동력성능을 만족하는 견인전동기의 동력 설계사양 정의 및 표준운전모드를 적용한 실운전 조건에서의 연비효율 향상을 목표로 하는 견인전동기의 효율 설계사양 정의를 나타낸다.