• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1057-1062
• /
• 2014

Vehicular communications can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In this paper, we represent measurement results of radio characteristics of vehicular communications using IEEE 802.11p based system in urban environments. Radio characteristics are based on the packet error rate (PER) and received spectrum mask. Using measurement results, we discuss implementation issues of vehicular communication systems for supporting reliable services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.443-451
• /
• 2010

This paper proposes the methodology about advisory safety speed based on real-time vehicular data collected from highway. The proposed model is useful information to drivers by appling seamless wireless communication and being collected from ECU(Engine Control Unit) equipment in every vehicle. Furthermore, this model also permits the use of realtime sensing data like as adverse weather and road-surface data. Here, the advisory safety speed is defined "the safety speed for drivers considering the time-dependent traffic condition and road-surface state parameter at uniform section", and the advisory safety speed model is developed by considering the parameters: inter-vehicles safe stopping distance, statistical vehicle speed, and real-time road-surface data. This model is evaluated by using the simulation technique for exploring the relationships between advisory safety speed and the dependent parameters like as traffic parameters(smooth condition and traffic jam), incident parameters(no-accident and accident) and road-surface parameters(dry, wet, snow). A simulation's results based on 12 scenarios show significant relationships and trends between 3 parameters and advisory safety speed. This model suggests that the advisory safety speed has more higher than average travel speed and is changeable by changing real-time incident states and road-surface states. The purpose of the research is to prove the new safety related services which are applicable in SMART Highway as traffic and IT convergence technology.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.95-100
• /
• 2019

In this paper, autonomous vehicles of service with existing vehicle accident for the prevention of the vehicle communication technology, self-driving techniques, brakes automatic control technology, artificial intelligence technologies such as well and developed the vehicle accident this occur to death or has been techniques, can prepare various safety cases intended to minimize the injury. In this paper, it is a study to secure safety in autonomous vehicles. This is determined according to spatial factors such as chip signals for general low-power short-range wireless communication and micro road AI. On the other hand, in this paper, the safety of boarding is improved by checking the signal from the electronic chip, up to "recognition of the emotion from residence time in the sensing area" to the biological electronic chip. As a result of demonstrating the reliability of the world countries the world, inducing safety autonomous system of all passengers in terms of safety. Unmanned autonomous vehicle riding and commercialization will lead to AI systems and biochips (Verification), linked IoT on the road in the near future, and the safety technology reliability of the world will be highlighted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.113-116
• /
• 2010

최근 차량 내부의 전자 제어장치에 대한 운전자의 편의성 및 안전성의 요구 수준이 높아지고 있으며 이러한 수요자의 요구를 만족시키기 위하여 자동차 업계에서도 첨단식 편의기능을 갖춘 자동차의 개발에 많은 초점을 모으고 있는 추세이다. 이에 대응해 차량 내부의 전자시스템 사이에 상호 통신을 위한 차량용 네트워크 기술도 빠르게 발전하고 있다. 특히 대용량 데이터를 고속으로 전송할 수 있도록 높은 대역폭을 제공하는 차량용 광 네트워크가 주목 받고 있으며 현재 일부 차량에 도입되어 양산되고 있는 추세이다. 이러한 기술적 변화에 맞춰서 본 연구에서는 차량용 광 통신 네트워크 표준인 "MOST"의 백본망을 구축하여 무선 이동 단말기 보드(MV Board)를 통해 MOST 광 네트워크에 연결되어 있는 여러 장치들에 대한 다양한 정보를 수신할 수 있고 MOST네트워크 동작 및 운영상태를 확인해 볼 수 있는 시스템을 구성하였다.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.420-430
• /
• 2010

Due to increasing demand for improving road safety and optimizing road traffic, Vehicular Ad-Hoc Networks (VANET) have been subject to extensive attentions from all aspects of commercial industry and academic community. Security and user privacy are fundamental issues for all possible promising applications in VANET. Most of the existing security proposals for secure VANET concentrate authentication with privacy preservation in vehicle-to-vehicle (V2V) and vehicle-to-roadside infrastructure (V2I) communications and require huge storage and network capacity for management of revocation list. Motivated by the fact, we propose a new scheme with security and privacy preservation which combines V2V and V2I communication. With our proposed scheme, the communication and computational delay for authentication and overhead for management of revocation list can be significantly reduced due to mutual authentication between a vehicle and a Roadside Unit (RSU) requires only two messages, and the RSU issues the anonymous certificate for the vehicle on behalf of the Trust Authority (TA). We demonstrate that the proposed protocol cannot only guarantee the requirements of security and privacy but can also provide efficiency of authentication and management of revocation list.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.203-212
• /
• 2007

An advanced vehicle safety system can be constructed by exchanging danger-related information ,such as urgency stop, traffic accident, obstacle, and car trouble, among the vehicles. However, because network topology changes rapidly and frequently due to the mobility of vehicles, it is impossible to configure the network for information forwarding in this environment. In the most of vehicle safety communication applications, an emergency message is propagated in a form of broadcasting. The simple broadcasting causes a lot of problems in terms of efficiency due to multi-hop area and radio collision problem. This paper proposes a method of selective message forwarding with stem and branch structure for propagating the emergency messages. However, the proposed method raise the efficiency of message transmission with the selective forwarding based on the priority assignment as its location. We analyze and evaluate the performance by comparing the proposed scheme with other schemes that are presented in the paper.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.109-118
• /
• 2009

The conventional lane changing model has been developed without acceleration or deceleration of vehicles at target lane. Thus, existing lane changing models have limitation to apply in real world. In this paper, lane changing model considered acceleration or deceleration, and calculated the safety distance between subject vehicle and adjacent vehicles for lane changing as well. Simulation was conducted to verify the validity and the efficiency of the developed lane changing model in this paper. Several scenarios were carefully examined by safety distance between subject vehicle and adjacent vehicles. In the result, it was verified that if gap between subject vehicle and adjacent vehicles is larger than safety distance, lane changing behavior between subject vehicle and adjacent vehicles avoids collision. The suggested lane changing model may be applied at the future driver assistance system and advanced safety vehicle.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.239-248
• /
• 2012

VANET (Vehicular Ad-hoc Network) is a type of MANET (Mobile Ad-hoc Network) which is the next-generation networking technology to provide communication between vehicles or between vehicle and RSU (Road Side Unit) using wireless communication. In VANET system, a vehicle accident is likely to cause awful disaster. Therefore, in VANET environment, authentication techniques for the privacy protection and message are needed. In order to provide them privacy, authentication, and conditional, non-repudiation features of the group signature scheme using a variety of security technologies are being studied. In this paper, and withdrawal of group members to avoid frequent VANET environment is suitable for vehicles produced by the group administrator for a private signing key to solve the key escrow problem of a group signature scheme is proposed. We proposed a message batch verification scheme using Bloom Filter that can verify multiple messages efficiently even for multiple communications with many vehicles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.773-776
• /
• 2009

Last of the car industry can be grouped in one-vehicle electronic equipment, the development of the network, and accordingly the communication between each of the network is important. The network currently being used in vehicles include CAN, LIN, MOST, FlexRay, etc. are used. Network of several different kinds of applications using the federation said they were also germ, which causes the driver some more convenient environment, the desire to drive a vehicle that is increasing. If vehicle for other network environments with one integrated environment to make it a gateway for research done actively, the more applications are expected to be developed. In this paper, using gateway between CAN bus used for Body Train-side control of the vehicle network and MOST provided for infotainment systems. In vehicle automatic safety control system will be designed by One of CAN Nodes car speed information sending to MOST Navigation while don't received GPS information in the tunnel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3672-3679
• /
• 2012

Vehicle Ad hoc Network (VANET) is next-generation network technology to provide various services using V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In VANET, many researchers proposed various studies for the safety of drivers. In particular, using the emergency message to increase the efficiency of traffic safety have been actively studied. In order to efficiently transmit to moving vehicle, to send a quick message to as many nodes is very important via broadcasting belong to communication range of vehicle nodes. However, existing studies have suggested a message for transmission to the communication node through indiscriminate broadcasting and broadcast storm problems, thereby decreasing the overall performance has caused the problem. In addition, theses problems has decreasing performance of overall network in various form of road and high density of vehicle node as urban area. Therefore, this paper proposed Clustering based Routing Algorithm (CBRA) to efficiently transmit emergency message in high density of vehicle as urban area. The CBRA managed moving vehicle via clustering when vehicle transmit emergency messages. In addition, we resolve linkage problem between vehicles according to various form of road. The CBRA resolve link brokage problem according to various form of road as urban using clustering. In addition, we resolve broadcasting storm problem and improving efficacy using selection flooding method. simulation results using ns-2 revealed that the proposed CBRA performs much better than the existing routing protocols.