• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.183-189
• /
• 2014

A recent trend of 'Smart Technology' has changed the simple and normal car into smart vehicle. Smart vehicle has a complex aspects of technologies and Wireless Access in Vehicular Environment (WAVE) is the technology that is mentioned for the communication infrastructure of Smart Vehicle. The current status about WAVE in Korea, however, is not good to be used in smart vehicular communication. The reason for that is that the frequency band for WAVE is not assigned or allocated in Korea. In this paper, we will explore the current status of technology standard for WAVE and investigate the way of frequency allocation for WAVE with the survey analysis from the smart vehicle industry.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.63-69
• /
• 2014

For the safety messages in IEEE 802.11p vehicles network environment(WAVE), strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. WAVE standards apply multiple radios and multiple channels to provide open public road safety services and improve the comfort and efficiency of driving. Although WAVE standards have been proposed multi-channel multi-radio, the standards neither consider the WAVE multi-radio environment nor its effect on the beacon broadcasting. Most of beacon broadcasting is designed to be delivered on only one physical device and one control channel by the WAVE standard. also conflict-free channel assignment of the fewest channels to a given set of radio nodes without causing collision is NP-hard, even with the knowledge of the network topology and all nodes have the same transmission radio. Based on the latest standard IEEE 802.11p and IEEE 1609.4, this paper proposes an interference aware-based channel assignment algorithm with Nash bargaining solution that minimizes interference and increases throughput with wireless mesh network, which is deigned for multi-radio multi-cahnnel structure of WAVE. The proposed algorithm is validated against numerical simulation results and results show that our proposed algorithm is improvements on 8 channels with 3 radios compared to Tabu and random channel allocation algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1397-1402
• /
• 2010

While MOST is an in-vehicle network which transfers concurrently synchronous data, asynchronous data and control data, it provides high bandwidth synchronous section which can transfer video and audio without buffering. To transfer real time data using synchronous section, connections between source node and sink node, and channel allocation for connections are required. In this paper, we proposed synchronous data transfer method and channel allocation method by constructing MOST network after designing and implementing channel allocation module for using synchronous data section.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.99-111
• /
• 2002

전산기술의 발달에 힘입어 근래에 모의실험을 이용한 연속교통류의 미시적 분석이 활발히 수행되고 있고 다양한 모의실험 전산모형이 소개되고 있다. 미시적 연속교통류 전산모의실험은 차량추종모형과 차로변경모형을 적용하여 다양한 운전자들의 차량운행행태를 모사하여 분석하는 실험이다. 전산모형은 난수를 토대로 차량의 자유속도와 초기 발생 차로를 배정하기 때문에 낮은 자유속도를 할당받은 차량이 높은 속도의 차로(예:1차로)로 발생되는 경우가 발생한다. 많은 모의실험모형이 사용하고 있는 차로변경의 가정이 "운전자는 자신이 원하는 속도(자유속도)를 유지한다"는 것이며 그러한 가정만의 적용으로 인해 현실적이지 않은 차로 이용률이 결과되고, 따라서 전산모형을 통한 교통류 흐름분석에 문제를 제공하고 있다. 본 논문에서는 미국 도로국에서 20여년 동안 개발되고 수정되어왔으며 현재 실용적으로 가장 많이 사용되고 있는 Freeway Simulation(FRESIM) 전산모형이 내재한 차로변경모형을 토대로 고속도로 기본구간에서의 선택적 차로변경모형을 제시한다. 제시된 모형에서는 (1)저속의 선행차량이 고속의 후행차량에게 차로를 양보하는 가정이 새롭게 추가되고 (2)FRESIM모형에서 사용하는 상수값을 국내 현장조사를 통하여 도출된 분포식을 통한 값으로 대체하였다. 수집된 자료분석결과 연속 교통류에서의 15% 차두시간은 1.34초이며 차로변경시간은 평균 2.22초인 F분포를 따르고, 자유속도는 정규분포를 따르는 것으로 결과되었다. 모의실험결과 무작위난수를 토대로 배정된 차로로 생성된 차량들이 새롭게 제시된 차로변경모형의 적용으로 현장 차로이용률을 95% 신뢰수준에서 모사하는 것으로 분석되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.103-111
• /
• 2016

This paper presents an adaptive variable weights tuning system for an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) for lateral stability enhancement. After calculating the control yaw moment needed to stabilize a vehicle with a controller design method, it is distributed into the tire forces generated by ESC and AFS using weighted pseudo-inverse-based control allocation (WPCA). On a low friction road, lateral stability can deteriorate due to high vehicle speed. To cope with the problem, adaptive tuning rules on variable weights of the WPCA are proposed. To check the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, CarSim.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.111-119
• /
• 2017

This paper presents a method to determine the rear steering angle in integrated chassis control with electronic stability control (ESC) and rear wheel steering (RWS). A control yaw moment needed to stabilize a vehicle should be distributed into the tire forces generated by the ESC and RWS. Weighted pseudo-inverse control allocation (WPCA) is adopted to determine the tire forces. Four methods are proposed to calculate the rear wheel steering angle. To validate the proposed methods, a simulation is performed using a vehicle simulation software package, CarSim. The simulation results show that the proposed method for determining the rear wheel steering angle improves the performance of the integrated chassis control.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.40-46
• /
• 2009

Recently CAN (Controller Area Network) is widely used as an in-vehicle networking protocol for intelligent vehicle. The identifier field (ID) of CAN is used not only to differentiate the messages but also to give different priorities to access the bus. This paper presents a dynamic 10 allocation algorithm in order to enhance the real-time quality-of-service (QoS) performance. When the network traffic is increased, this algorithm can allocate a network resource to lower priority message without degradation of the real-time QoS performance of higher priority message. In order to demonstrate the algorithm's feasibility, message transmission delays have been measured with and without the algorithm on an experimental network test bed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.343-345
• /
• 2012

기존의 교통제어 시스템은 고정된 녹색 신호의 길이와 주기를 갖고 있다. 그에 따라 차선 간 차량 밀집도가 불균형한 경우 교통 처리량이 저하되고 응급상황이 발생할 경우 지정체가 유발된다. 본 논문에서는 VANET을 이용하여 교통량의 실시간 정보를 수집해 적응적으로 교통 신호를 제어하는 시스템을 제안한다. 차량의 수, 평균 신호대기 시간, 차선 간 균형, 응급상황 등을 고려하여 교통 신호를 가변적으로 제어 한다. 차량이 교차로에 진입하기 전 통신모듈을 갖고 있는 신호등에게 위치, 방향, 속도 정보 등을 송신하고 traffic control system에서 교통량을 분석하여 녹색 신호를 가변적으로 할당 한다. 실험결과 제안 기법이 교통 처리량, 평균 신호대기시간에서 기존 교통신호 제어 기법보다 높은 성능을 확일 할 수 있었다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.228-239
• /
• 2005

In this paper, we propose a new conceptual HVRPCR(Heterogeneous Fleet Vehicle Routing Problem with Customer Restriction) model including additional restrictions that are consisted of loadage limit and possible visit number of demand post in HVRP. We propose HVRPCR algorithm using the heuristic in order to solve speedily because VRP is NP-Hard and need many solution time. The proposed model is simulated with changing demand post location, demand weight, loading and possible visit number limitation. Results of the computational experiment are provided along with some analysis like travel cost reduction rate.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.481-485
• /
• 2012

차량 통신 네트워크(VANET, Vehicular Ad Hoc Network)는 운전자 안전 정보 및 ITS(Intelligent Transp ortation System) 서비스를 지원하기 위해 IEEE 1609.4와 IEEE 802.11p를 활용한다. 그러나 차량 노드들의 숫자가 증가할 경우에는 트래픽 경합 문제(Traffic Contention Problem), 숨은 터미널 문제(Hidden Terminal Problem), 전송 지연 문제, 경합으로 인한 패킷 손실 문제, 처리량 감소 문제, MAC의 동적 채널 할당 방법 등 많은 문제점이 발생한다. 따라서 본 논문에서는 IEEE 1609.4와 IEEE 802.11p 기반 차량 통신 네트워크의 특징을 살펴봄으로써 기존 제안되었던 차량 통신 네트워크를 위한 MAC 및 멀티채널 기술의 특징의 장단점을 분석한다. 또한 분석된 문제점을 해결하기 위한 연구 방향을 제시한다.