• Journal of the Korean Geosynthetics Society
• /
• 제7권1호
• /
• pp.31-37
• /
• 2008

The settlement occurring during landfill construction often causes a damage of drainage system. Clogging can reduce the hydraulic conductivity of the Leachate Collection and Drainage System, which results in the increase of leachate level within the landfill. Consequently, the insulation ability of leachate will be decreased. The main purpose of this project is to estimate a newly designed reinforced drainage geotextile (RDG) combining non-woven fabrics with geogrid for minimizing the destruction of drainage layer as well as evaluating RDG's application in the leachate collection and drainage system. Thus, the project observed the permittivity changes of RDG, and evaluated the drainage ability using RDG in the leachate collection and drainage system.

• Korean Journal of Optics and Photonics
• /
• 제6권3호
• /
• pp.228-232
• /
• 1995

We have made modulation doped SMQW-PBH-DFB-LD for high speed optical communications. The waveguide and barrier layers were doped by Zn with the concentration of $1.2 \times 10^{18}cm^{-1}$. Mean threshold current and slope efficiency were 24.88 mA (minimum 16 mA) and 0.197 mW/mA (maximum 0.275 mW/mA) respectively. Linewidth enhancement factor ($\alpha$) of MD-SMQW-PBH-DFB-LD was reduced than that of SMQW-PBH-DFB-LD. Linewidth enhancement factor of 1.8 owes to the large gain coefficient of modulation doped active layer. The resonance frequency was linearly increased with the square root of optical power. The resonance frequency in small signal modulation was measured as 8 GHz and -3 dB modulation bandwidth was 10 GHzat $46mA(I_{th}+30mA)$..

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.337-337
• /
• 2010

하나로 반사체의 수직공 안에 설치된 냉중성자원 시설계통의 수조내기기는 원자로에서 생성되는 열중성자를 약 22K의 감속재로 감속시켜 0.1~10 meV 범위에서 높은 선속을 갖는 냉중성자를 생산한다. 냉중성자를 생산하기 위한 냉중성자원 시설계통의 구성은 감속재인 수소를 포함하고 있는 수소계통, 수소의 외부누출을 방지하기 위한 가스블랭킷계통, 극저온의 액체수소를 생산하기 위한 헬륨냉동계통, 극저온인 액체수소 층을 감속재용기 내에 유지하기 위한 진공계통 등으로 되어있다. 이들 계통 중 진공계통은 냉중성자원 시설계통의 정상운전 시 액체수소 열사이펀, 감속재용기 등의 냉중성자원 극저온 부품의 단열을 위하여 진공용기의 내부 진공도를 공정진공도 이하로 유지하기 위한 계통이다. 정상운전 시 진공계통으로부터 발생되는 배기 가스는 배기 수집탱크에 포집된다. 냉중성자원 시설계통으로부터 발생되는 배기가스는 배기수 집탱크를 통하여 수소의 누출여부를 확인한 후 원자로홀로 배기되도록 되어 있으며, 만일의 경우 탱크내부의 배기가스 수소 농도가 기준치인 3.5%이상일 때는 유입 원을 자동으로 차단하고, 희석용 가스인 고압의 질소를 주입하여 수소의 농도를 기준치 이하로 낮춘 후 원자로 홀로 자동 배출하도록 되어 있다. 본 논문에서는 냉중성자가 생산되는 냉중성자원 시설계통의 운전과정에서 진공계통으로부터 배출되는 배기가스를 배기수집탱크로 포집하고, 이 가스에 대해 수소가스의 농도를 분석하여 원자로 홀로 안전하게 배기할 수 있도록 수행된 수소가스 분석에 대해 기술하였다.

• Journal of IKEEE
• /
• 제23권2호
• /
• pp.375-379
• /
• 2019

$ZnO-SnO_2(ZTO)$ was deposited by RF magnetron sputtering using a ceramic target whose Zn atomic ratio to Sn is 2:1 as a target, and the crystal structure variation with thermal treats was investigated. Transparent thin film transistors (TTFT) were fabricated using the ZTO films as active layers. About 100 nm-thick $Si_3N_4$ film grown on 100 nm-thick $SiO_2$ film was adopted as gate dielectrics. The mobility, threshold voltage, $I_{on}/I_{off}$, and interface trap density were obtained from the transfer characteristics of ZTO TTFTs. The effects of substrate temperature, and post-annealing on the property variation of ZTO TTFT were analyzed.

• Journal of the Korean Vacuum Society
• /
• 제18권2호
• /
• pp.108-115
• /
• 2009

The superlattice infrared photodetector (SLIP) with an active layer of 8/8-ML InAs/GaSb type-II strained-layer superlattice (SLS) of 150 periods was grown by MBE technique, and the proto-type discrete device was defined with an aperture of $200-{\mu}m$ diameter. The contrast profile of the transmission electron microscope (TEM) image and the satellite peak in the x-ray diffraction (XRD) rocking curve show that the SLS active layer keeps abrupt interfaces with a uniform thickness and a periodic strain. The wavelength and the bias-voltage dependences of responsivity (R) and detectivity ($D^*$) measured by a blackbody radiation source give that the cutoff wavelength is ${\sim}5{\mu}m$, and the maximum Rand $D^*$ ($\lambda=3.25{\mu}m$) are ${\sim}10^3mA/W$ (-0.6 V/13 K) and ${\sim}10^9cm.Hz^{1/2}/W$ (0 V/13 K), respectively. The activation energy of 275 meV analyzed from the temperature dependent responsivity is in good agreement with the energy difference between two SLS subblevels of conduction and valence bands (HH1-C) involving in the photoresponse process.

• Korean Journal of Food Science and Technology
• /
• 제42권3호
• /
• pp.335-342
• /
• 2010

Bioactive components involved in the tight junction stabilization of intestinal epithelial cells from Korean red ginseng were studied by analyzing transepithelial electrical resistance (TEER) values of the Caco-2 cell monolayer between the apical and basolateral sides for 96 hr. The treatment with less than $20\;{\mu}g/mL$ of the Korean red ginseng extract to the apical side of Caco-2 cell monolayer gave higher TEER values than the control. However, the treatment with more than $130\;{\mu}g/mL$ of the Korean red ginseng extract drastically decreased the TEER values, and these effects were not due to its cytotoxicity. When fractions of low molecular weight compounds, polysaccharides, proteins, saponins, and polyphenols derived from Korean ginseng were applied to the apical side of the Caco-2 cell monolayer, polyphenols showed high tight junction stabilizing activity and saponins showed low activity, but the others showed no significant activity. These results suggest that Korean red ginseng might be useful for the prevention of food allergy by stabilizing the tight junction of intestinal epithelial cells leading to hindering absorption of food allergens.

• Journal of the Korean Vacuum Society
• /
• 제20권1호
• /
• pp.22-29
• /
• 2011

An infrared thermographic imaging module of [$320{\times}256$] focal-plane array (FPA) based on [InAs/GaSb] strained-layer superlattice (SLS) was fabricated, and its images were demonstrated. The p-i-n device consisted of an active layer (i) of 300-period [13/7]-ML [InAs/GaSb]-SLS and a pair of p/n-electrodes of (60/115)-period [InAs:(Be/Si)/GaSb]-SLS. FTIR photoresponse spectra taken from a test device revealed that the peak wavelength (${\lambda}_p$) and the cutoff wavelength (${\lambda}_{co}$) were approximately $3.1/2.7{\mu}m$ and $3.8{\mu}m$, respectively, and it was confirmed that the device was operated up to a temperature of 180 K. The $30/24-{\mu}m$ design rule was applied to single pixel pitch/mesa, and a standard photolithography was introduced for [$320{\times}256$]-FPA fabrication. An FPA-ROIC thermographic module was accomplished by using a $18/10-{\mu}m$ In-bump/UBM process and a flip-chip bonding technique, and the thermographic image was demonstrated by utilizing a mid-infrared camera and an image processor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권8호
• /
• pp.14-18
• /
• 2018

Generally. the Ohmic's law is an important factor to increase the conductivity in a micro device. So it is also known that the Ohmic contact in a semiconductor device is import. The PN junction as a structure of semiconductor involves the depletion layer, and this depletion layer induces the non linear electrical properties and also makes the Schottky contact as an intrinsic characteristics of semiconductor. To research the conduction effect of insulators in the semiconductor device, $SiO_2$ thin film and $V_2O_5/SiO_2$ thin film were researched by using the current-voltage system. In the nano electro-magnetic system, the $SiO_2$ thin film as a insulator had the non linear Schottky contact, and the as deposited $V_2O_5$ thin film had the linear Ohmic contact owing to the $SiO_2$ thin film with superior insulator's properties, which decreases the leakage current. In the positive voltage, the capacitance of $SiO_2$ thin film was very low, but that of $V_2O_5$ thin film increased with increasing the voltage. In the normal electric field system, it was confirmed that the conductivity of $V_2O_5$ thin film was increased by the effect of $SiO_2$ thin film. It was confirmed that the Schottky contact of semiconductors enhanced the performance of electrical properties to increased the conductivity.

• Applied Microscopy
• /
• 제32권1호
• /
• pp.17-30
• /
• 2002

The retinae of Todarodes pacificus and Octopus minor are divided into four layers that are an outer segment, a rod base region, an inner segment, and a plexiform layer, respectively. The retina of Octopus minor is about $20{\mu}m$ thicker ($400{\sim}420{\mu}m$) than that of Todarodes pacificus ($385{\sim}400{\mu}m$). A retina is composed of visual cells and supporting cells. The microvilli of length $0.6{\sim}0.7{\mu}m$ are packed densely on top of the supporting cells of Octopus minor while they are not found in Todarodes pacificus. The visual cells and supporting cells have pigment granules that exclude light. In case of Todarodes pacificus, the pigment granules of the visual cell are larger ($2.0{\times}0.5{\mu}m$) than those of the supporting cell ($1.0{\times}0.3{\mu}m$). But, the sizes of both cells are similar in Octopus minor. In the upper portion of a visual cell, microvilli shaped like a comb are forming a rhabdome (diameter, 60 nm) of a hexagonal structure. The rhabdome consists of 4 rhabdomere and the total area of a rhabdom of Octopus minor is larger than that of Todarodes pacificus. The synaptosome constructing a plexiform layer in Todarodes pacificus are divided into two types, each of which possess electron dense-core vesicles and electron lucent vesicles, respectively. Octopus minor also has two types of synaptosomes but each type comprises a mixture of electron dense vesicles and electron lucent vesicles, and electron lucent vesicles only, respectively, which is different from the case of Todarodes pacificus.

• Journal of the Microelectronics and Packaging Society
• /
• 제23권3호
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].