• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.117-124
• /
• 1991

Based on the momentum equation for the flow in a stream bend, the force per unit area which the flow exerts on the outer of a bend is directly proportional to a certain curvature coefficient, $C{\alpha}$. This coefficient is dependent on the ratio of bend radius(R) to flow width(W), as well as on the coefficient of dynamic bedload friction, $tan{\alpha}$. According to the results of the data analysis for the downstrream at the Han river, the range of R/w values is between 2.0 and 4.0. Exploring the variations of $C{\alpha}$ with R/w values a functional relationship which, for the known values of $tan{\alpha}$, shows maximum values of $C{\alpha}$ for R/w values between 2.21 and 4.42 in 1963, while in 1981 its values lied between 1.93 and 3.54.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.1
• /
• pp.63-69
• /
• 2018

Bearing is an essential component in many rotary machineries. To prevent its unpredicted failures and undesired downtime cost, many researches have been made in the field of Prognostics and Health Management(PHM), in which the key issue is to establish a proper feature reflecting its current health state properly at the early stage. However, conventional features have shown some limitations that make them less useful for early diagnostics and prognostics because it tends to increase abruptly at the end of life. This paper proposes a new feature extraction method using the envelope analysis and weighted sum with correlation coefficient. The developed method is demonstrated using the IMS bearing data given by NASA Ames Prognostics Data Repository. Results by the proposed feature are compared with those by conventional approach.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.169-187
• /
• 2015

Ports as central factors of the logistics industry and principal bases in industrial activities play a significant role in the development of the social economy. This paper takes the throughput data from 2000 to 2014 of 10 container ports located in China as the research object with the Gini coefficient and employs the shift-share analysis. It aims to analyze the changes in port concentration and movement of container throughputs and propose a stage of development port system in China. The results are as follows. First, the system of container ports clearly moves northward. According to the above shift-share analysis, the throughput moves from the Pearl River Delta to the other two regions. This indicates that the center of Chinese container port system moves northward. Second, container port diversification development takes a representative position in the change of container throughput space structure. According to the calculation results of Gini coefficient, diversified development gradually predominates the change of container throughput space structure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.315-326
• /
• 2004

This study performed model tunnel tests in order to investigate the influence of discontinuity condition of rock mass to the stress and deformation of tunnel lining. Tests were carried out changing the direction of main joint and lateral earth pressure condition of rock mass. Test results revealed that the axial force in tunnel lining showed a tendency of decrease with the presence of joints. It decreased much with the increase of lateral earth pressure coefficient. And, it also showed that the location or maximum displacement and maximum stress in lining were changed by the direction of main joint of rock mass. The tangential stress and normal stress showed the difference above the maximum twenty times as lateral earth pressure coefficient due to effect of joints increased. Also, these tendencies of concentration of tensile stress in tunnel lining were confirmed by elastic theory.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.713-724
• /
• 2004

A fatigue crack found at the coped stringer of the old dismantled Dangsan Subway Bridge was numerically simulated. A model of a single span of the plate girder bridge with its beam elements was created and analyzed in order to obtain the nominal stress history caused by trains. A detailed FEM analysis of the coped stringer was conducted using a shell element model. A fracture mechanical model was used to estimate crack propagation. The stress intensity factors were calculated using the J-Integral method. The simulation with some reasonable assumptions showed that the calculated crack lengths were comparable to those found on the site.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.3
• /
• pp.599-621
• /
• 2011

The role of local economies in pursuing national economic development has expanded with greater influence. So a number of countries have adopted industrial cluster policies for regional and national economic development. Korean government, by the same token, puts emphasis on industrial cluster policies. But the academic studies on the necessities and effects of industrial clusters for Korean shipbuilding industry have been carried out little in Korean due to the lack of empirical studies on Korean industrial clusters. So this study focuses on analysing the industrial clusters in the Busan, Ulsan, Koungnam as southeast area of Korea. To be more specific, this study intends to provide answers to the following question: Are there industrial clusters in the Busan, Ulsan, Koungnam as southeast area of Korea analysed by the Location Quotient(LQ) analysis method? And as a consequence, Shipbuilding industrial clusters of southeast area of Korea were not identified.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.73-80
• /
• 2002

RFM is believed to be universally applicable to any type of the sensor. Most of researches carried out lately are concentrated on terrain-independent method, but the researches about approvement of accuracy by way of terrain-dependent method are required to increase a practical use of satellite imagery in nonprofessional groups. This research focused on a means to improve RFM solution, a matching technique, and a generation of DEM through a correlation analysis, with terrain-dependent solution. The result shows that accuracy problem which is caused by over-parameterization on RFCs was removed through correlation analysis, and it was possible to generate a accurate DEM with terrain-dependent solution. And also, the application of RFM with different satellite images show sensor independent characteristics of RFM

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.139-139
• /
• 1999

다이아몬드는 지구상에서 가장 단단한 물질로 잘 알려져 있을 뿐만 아니라 공업적 측면에서 볼 때, 여러 가지 특출한 성질들을 동시에 지니고 있다. 인장강도, 압축강도, 탄성계수 등 기계적 특성이 우수하고 넓은 광투과성과 내열, 내화학, 내방사성을 지니고 있으며, 열전도율이 높고 전기적으로 절연체이다. 또한 hole이동도가 높고 도핑에 의해서 반도체적 특성을 나타낸다. 이와 같이 매우 뛰어난 성질을 공업적으로 응용하기 위하여 이전부터 많은 연구가 행해져 왔으며, 1980년대에 들어와 박막이나 코팅 형태로의 합성이 가능한 기상합성법이 큰 발전을 보임으로써 다이아몬드의 우수한 특성을 여러 분야에서 폭넓게 응용할 수 있게 되었다. 특히 마찰 응용분야에 최적의 재료로 추천되고 있다. 지금도 Epitaxial 다이이몬드를 기지 위에 성장시키고 다결정질박막을 여러 가지 비다이아몬드(Si, W, Mo 등) 기지 위에 성장시키는 연구가 계속되고 있으며 공구강 위엥 경질코팅으로써 한층 개선된 다이아몬드박막 제조를 위한 수많은 연구노력들이 집중되고 있다. 그러나 일반탄소강에 다이아몬드박막을 성장시키기 위한 많은 노력들은 크게 바람직하지 않은 non-diamond carbon(black carbon or graphitic soot)의 형성 때문에 방해를 받고 있다. 계면에서 이들의 형성은 증착된 다이아몬드박막과 금속기지의 저조한 밀착력을 나타내게 된다. 이외 같이 다이아몬드박막의 응용을 위하여 다이아몬드피막에 요구되는 중요한 조건은 기지에 대해서 강한 밀착력을 나타내는 것이며, 동시에 상대물에 대하여 낮은 마찰계수를 가져야 한다. 그러나 다이아몬드와 금속기지는 서로 다른 열챙창계수(각각 0.87$\times$10-6K-1, 12$\times$10-6K-1)의 차이로 인하여 밀착력이 현저히 떨어진다는 단점으로 인해 산업화에 많은 제약을 받아왔다. 이러한 문제점을 해결하기 위하여 본 연구에서는 다이아몬드박막과 금속기지 사이에 중간층을 이용하는 방법을 제안하였다. 이러한 시도는 일반적으로 중간층 형성 금속인 Ti 또는 TiN 등이 적용되었으나 원하는 결과를 얻지 못하였다. 즉 carbon과 Fe의 상호확산, non-diamond carbon상의 형성 그리고 열잔류응력을 완화시키고 일반탄소강 위에 다이아몬드박막을 형성시켜 우수한 밀착력을 얻기 위한 목적에 미흡하였던 것이다. 이에 중간층으로 Cr 또는 Cr계 화합물 박막을 이용하였는 바, 이 중간층을 이용한 결과 우수한 밀착력을 나타내는 다이아몬드박막을 얻었으며 열적, 구조저으로 모재와 다이아몬드에 적합한 결과를 얻을 수 있었다. 본 연구에 의해 얻어진 결과들은 재료 가공을 위하여 높은 경도와 내마모성등이 요구되는 절삭공구나 금형의 수명 향항에 크게 기여할 것이며 산업적으로 큰 응용이 기대된다.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.2
• /
• pp.137-155
• /
• 2017

Many university libraries, facing financial difficulties, have been forced to operate on a tighter budget. Such trend has created the need for an objective standard that will prioritize current library services. This study derives service quality factor via open coding from internet postings posted in the last five years on the Korean National Open University's library website, and also calculates the customer satisfaction quotient and dissatisfaction quotient using the Kano Model and Timko's Customer Satisfaction Coefficient. The result draws 25 service quality factors across 3 categories consisting of: (i) 8 attractive qualities, (ii) 15 one-dimensional qualities and (iii) 2 reverse qualities. The study, through the calculation of Timko's Customer Satisfaction Coefficient per service quality, proposes an intensive service that can prioritize the efficient use of library budget.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.221-231
• /
• 1990

In this paper, A new 2-D DCT algorithm is proposed to reduce the computational amount of transform operation using the distribution of the motion compensated error signal and the bit allocation table. In the this algorithm, 2-D Walsh-Hadamard transform is directly computed and then multiplied by a constant matrix. Multiplications are concentrated on the final stage in thie algorithm, thus the computational amount is reduced in proportion to the number of transform coefficients that are excluded from quatization. The computational amount in computing only the DCT coefficients allocated to the bit allocation table is calculated. As the result, the number of multiplications is less thn the algorithm known to have the fewest number of computations when less than 0.6 bits per pixel are allocated to tranform coding for the motion compensated error image in the case of the proposed algorithm. Thus, it shows that the proposed algorithm is valid in reducing the computational loads of transform coding.