• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.50-50
• /
• 2003

본 연구에서는 행성 근접통과(Gravity Assist, Swingby, Flyby)를 이용한 행성간 탐사선의 궤도를 설계할 수 있는 알고리즘 개발을 자체적으로 수행하였다. 미 항공우주국(NASA)에서는 이를 이용한 행성간 탐사선의 궤도에 관한 연구를 이미 1950년대부터 시작하여 왔으며, 1973년 Mariner 10호가 한번에 두 행성, 금성과 수성을 탐사하는데 성공하였다. 행성간 임무에 있어서 행성 근접통과를 적절하게 이용한다면 임무 수행시 요구되는 에너지를 최소화 시킬 수 있어 발사비용의 절감효과와 함께 한번의 발사로 여러 행성의 탐사가 가능하여 임무의 효율성을 증대 시킬 수 있다. 행성 근접통과를 이용한 행성 탐사선의 궤도설계를 위해서는 근접 통과하는 행성(Flyby planet)에서의 진입속도벡터( $V_{\infty}$$^{ -}$) 및 출발속도벡터( $V_{\infty}$$^{+}$)의 크기, 근접 통과시의 비행 고도(Flyby altitude), 근접 통과 행성과의 충돌여부 분석(B-plane analysis), 최종적으로 도착하고자 하는 행성(Target planet)의 위치 등 많은 제한조건이 고려되어야 한다. 연구된 알고리즘의 결과를 미 항공우주국 (NASA)의 임무였던 Mariner 10호의 결과와 비교하여 보았으며, 우리나라가 향후 목성으로 탐사선을 보낸다고 가정하였을 경우, 행성 근접통과를 이용한 탐사선의 발사시기(Launch Window), 요구되는 발사 에너지(C3)값, 그리고 각각에 따른 궤적들을 산출하여 보았다. 이미 기술 개발을 완료한 국가들이 관련 기술의 제휴를 기피하고 있는 현 상황에서 이와 관련된 연구는 우주개발의 시대를 열고 있는 우리나라의 우주개발관련 기초 기술 분야를 위해 선행 연구되어야 할 부분이다. 기초 기술 분야를 위해 선행 연구되어야 할 부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하

• Korean journal of communication and information
• /
• v.76
• /
• pp.183-219
• /
• 2016

In light of the recent increase in new independent spaces within the field of artistic production, this study seeks to examine the daily experience and art practice of agents in such spaces. In-depth interviews were conducted with fifteen emerging artists, who manage new independent art spaces and participate actively in related activities, and the significance of their activities was analyzed. An important theoretical foundation of this study is Bourdieu's concept of the field of cultural production. According to Bourdieu, in order to understand a specific field, the habitus of agents must be studied together with the structure of the field. This study found that individuals belonging to the same or a close generation exhibit similar attitudes to life based on shared experiences, and they can be connected to their art practice. Most agents of new spaces did not have high expectations for success, and chose to practice art independently while bonding with their peers and enjoying the moment rather than wait for recognition or funding from external sources. Their self-fulfilling habitus is condition-specific and can be regarded as a form of flexible art practice. Given the poor conditions of today's field of artistic production, this is likely to serve as an advantage in entering the field and in position-taking. The social significance of this study lies in the fact that the aforementioned characteristics of the agents of independent production spaces not only reflect the current field of artistic production but also other fields of cultural production at large in our society.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.79-87
• /
• 2007

The interchanges of urban freeways have many problems with traffic operation due to high off-ramp flows and frequent congestion at adjacent intersections. The flow exiting from off-ramps is affected by the operational status and traffic volume conditions of the nearest signalized intersection. As a result, off-ramp flow cannot exit and the queue backs up the freeway mainline when queues from the signalized intersection form up to the junction of the off-ramp and street. The spacing between an off-ramp and an adjacent intersection is likely to determine the traffic conditions at the adjacent intersection. However, the current design guidelines do not consider such a factor. This study is to develop a model calculating the spacing between off-ramps and adjacent intersections considering the signal, traffic, and road conditions. The variables affecting the model in this study are effective green time (g/C), volume-capacity ratio (v/c), the number of lanes, and off-ramp volume. Various scenarios are designed to represent the effects of the variables and the road networks are constructed using VISSIM, which is a common traffic micro-simulation software package. The queue length is derived from VISSIM and this length is considered as the recommended spacing between the off-ramp and the adjacent intersection. Through the simulation analysis, regression models are developed to calculate the queue length reflecting the various conditions such as signals, traffic, and road configurations. The developed model can be used to create road design guidelines to determine the location of off-ramps in the planning stage.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.95-105
• /
• 2002

Under a specific roadway alignment condition by design-speed standards, safety of the roadway is determined by an actual operating speed of a driver. This research takes first lanes of four-lane(hi-direction) rural highways as target facility. It also takes the straight and curved lanes of the selected highways for in-depth study. This study used NC-97 to detect speeds of passenger cars whose speeds are not affected by front vehicles. This research analyzed properties of 85th percentile operating speed at upstream of horizontal and through curves under various alignment conditions. The results show that 53∼65 Percent of drivers drive faster than the posted speed-limit (80KPH) by 14∼20 KPH on average. It also shows that the 85th-percentile operating speeds are the lowest at the middle point of curve length when curve radius is smaller. However, they are lowest at 1/4 point of curve length when curve radius is greater. Along roadways where curve radius is small, difference between upstream speed and the speed along the curve is considerably large. On the other hand. the speed difference is setting smaller as the curve radius is increasing. According to the results, significant variables affecting the 85th percentile operating speeds are curve radius and the 85th-Percentile operating speeds of upstream curves.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.455-464
• /
• 2008

This paper examines the situation and tasks of competitive systems of EU transport market focusing on railways. Recently, the EU transport market has changed radically, thanks to an increasingly competitive rail market. The European Commission has stimulated the creation of a competitive environment that will enhance the position of rail. Some scholars have insisted that the rail market is more monopolistic than competitive. However, the case of UK rail privatization suggests this is not the case. Moreover, some countries have a rail market that is more competitive. We draw on a wide range of sources including statistics and analyses of recent phenomena. These demonstrate the emergence of competitive markets in EU rail and the difficulty of developing a competitive market. With regard to the adoption of the competitive market, we examine three things. First, we observe recent cases and trends in competitive markets. Second, we compare the result of competitive markets and non-competitive markets within EU nations. Third, we demonstrate factors of formation of competitive markets and the possible expansion. We identified differences within open market policies amongst EU nations. Although a competitive EU rail market may have some difficulties, it will steadily begin to overcome technological differences and a lack of funds, because EU countries have a common goal, which is to develop the railways, solving, wherever possible both environmental and energy problems. Through this analysis, we found that the free market in EU rail will be extended to deliver efficiency and quality service.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.2
• /
• pp.47-56
• /
• 2019

Recently, in order to overcome the difficulty of entering a fire source due to the occurrence of a large amount of smoke in the event of a fire in a parking lot, it has used that a method of discharge smoke using air supply, exhaust fans and jet fans installed for ventilation of parking lots. In this study, the variation of flow in the smoke layer was observed using CCTV under two conditions, in which only the air supply fan operates and the manned fan operates together, and the temperature around the plume was compared to Albert eq. to assess its suitability as a parking lot ventilation performance evaluation method. As a result, it was found that the smoke layer could be disturbed if the Jet Fan was operated at the same time, which could lead to the possibility of an initial evacuation disturbance. However, the additional operation of the Jet Fan has been confirmed by the observation CCTV that the emission performance is improved, which is believed to help conduct the suppression operation. The temperature around the plume was measured and compared to Alpert eq, and was analyzed to be about $2^{\circ}C$ lower at the center axis of the plume and $9.0^{\circ}C$ higher at 8 m in the direction of the discharge of smoke. The results of temperature measurements around the plume were lower than the maximum temperature expected in AS 4391 and did not exceed the expected temperature risk caused by the experiment. As with these results, the temperature risk from the progression of hot smoke tests is foreseeable, so it will be available as one of the general evaluation methods for assessing smoke control performance in a parking lot without relevant criteria.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.91-99
• /
• 2019

Existing node-to-node based optimal path searching is built on the assumption that all destination nodes can be arrived at from an origin node. However, the recent appearance of the adaptive path search algorithm has meant that the optimal path solution cannot be derived in node-to-node path search. In order to reflect transportation data at the links in real-time, the necessity of the node-to-link (or link-to-node; NL) problem is being recognized. This research assumes existence of a network with link-label and non-additive path costs as a solution to the node-to-link optimal path problem. At the intersections in which the link-label has a turn penalty, the network retains its shape. Non-additive path cost requires that M-similar paths be enumerated so that the ideal path can be ascertained. In this, the research proposes direction deletion and turn restriction so that regulation of the loop in the link-label entry-link-based network transformation method will ensure that an optimal solution is derived up until the final link. Using this method on a case study shows that the proposed method derives the optimal solution through learning. The research concludes by bringing to light the necessity of verification in large-scale networks.

• Clean Technology
• /
• v.28 no.3
• /
• pp.227-231
• /
• 2022

The demand for high-voltage power devices is rising in various industries, but especially in the transportation industry due to autonomous driving and electric vehicles. IGBT module parts of 3.3 kV or more are used in the power propulsion control device of electric vehicles, and the procurement of these parts for new construction and maintenance is increasing every year. In addition, research to optimize high-voltage IGBT parts is urgently required to overcome their very high technology entry barrier. For the development of high-voltage IGBT devices over 3.3 kV, the resistivity range setting of the wafer and the optimal conditions for major unit processes are important variables. Among the manufacturing processes to secure the optimal junction depth, the optimization of the diffusion process, which is one step of the unit process, was examined. In the diffusion process, the type of gas injected, the injection time, and the injection temperature are the main variables. In this study, the range of wafer resistance (Ω cm) was set for the development of high voltage IGBT devices through unit process simulation. Additionally, the well drive in (WDR) condition optimization of the diffusion process according to temperature was studied. The junction depth was 7.4 to7.5 ㎛ for a ring pattern width of 23.5 to25.87 ㎛, which can be optimized for supporting 3.3 kV high voltage power devices.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.105-115
• /
• 2021

The geological CO2 sequestration in underground geological formation such as deep saline aquifers and depleted hydrocarbon reservoirs is one of the most promising options for reducing the atmospheric CO2 emissions. The process in geological CO2 sequestration involves injection of supercritical CO2 (scCO2) into porous media saturated with pore water and initiates CO2 flooding with immiscible displacement. The CO2 migration and distribution, and, consequently, the displacement efficiency is governed by the interaction of fluids. Especially, the viscous force and capillary force are controlled by geological formation conditions and injection conditions. This study aimed to estimate the effects of surfactant on interfacial tension between the immiscible fluids, scCO2 and porewater, under high pressure and high temperature conditions by using a pair of proxy fluids under standard conditions through pendant drop method. It also aimed to observe migration and distribution patterns of the immiscible fluids and estimate the effects of surfactant concentrations on the displacement efficiency of scCO2. Micromodel experiments were conducted by applying n-hexane and deionized water as proxy fluids for scCO2 and porewater. In order to quantitatively analyze the immiscible displacement phenomena by n-hexane injection in pore network, the images of migration and distribution pattern of the two fluids are acquired through a imaging system. The experimental results revealed that the addition of surfactants sharply reduces the interfacial tension between hexane and deionized water at low concentrations and approaches a constant value as the concentration increases. Also it was found that, by directly affecting the flow path of the flooding fluid at the pore scale in the porous medium, the surfactant showed the identical effect on the displacement efficiency of n-hexane at equilibrium state. The experimental observation results could provide important fundamental information on immiscible displacement of fluids in porous media and suggest the potential to improve the displacement efficiency of scCO2 by using surfactants.

• Korea journal of population studies
• /
• v.10 no.2
• /
• pp.17-45
• /
• 1987

This study contributes to understanding women's labor market behavior by focusing on a particular set of labor force transitions - labor force withdrawal and entry during the period surrounding the first birth of a child. In particular, this study provides a dynamic analyses, using longitudinal data and event history analysis, to conceptualize labor force behaviors in a straightforward way. The main research question addresses which factors increase or decrease the hazard rates of leaving and entering the labor market. This study used piecewise Gompertz model, following the guide of the non-parametric analysis on the hazard rates, which allowed relatively detailed description on the distribution of timing of leave and entry to the labor market as parameters of interest. The results show that preferences and structural variables, as well as economic considerations, are very important factors to explain the labor market behavior of women in the period surrounding childbirth.