• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.81-82
• /
• 2014

Recently it is often reported about toxic nanomaterials to organisms. In other words, it is called nanotoxicity, toxic nanomaterials have extremely toxic properties. Zinc oxide is widely used as a promising nanomaterials, but some researchers are warning that nanotype zinc oxide has nanotoxicity. One of typical zinc oxide materials is a zinc oxide nanowire, especially, there is no technique which is detecting a zinc oxide nanowire because of its geometric. In here, we use reduced graphene oxide in order to detect zinc oxide nanowire and use DNA immobilized cantilever sensor, we detect graphene wrapped zinc oxide nanowire. Detection of a zinc oxide nanowire is measured by shifting of cantilever's resonance frequency based on vibration theory. It is proved that cantilever sensor is valid for nanomaterial detection. We showed that detection of a zinc oxide nanowire is successful.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.642-647
• /
• 2000

Conventional cepstrum has been widely used to detect echo and fault signals embedded in noise. One of the problems of finding impulse signals using the conventional cepstrum in that it is normally very sensitive to signal to noise ratio (SNR). This paper proposes a signal processing method to detect impulse signal in noisy environment. Because the proposed method minimizes the variance of signal power at a cepstrum domain, it is suggested to be called as minimum variance cepstrum (MV cepstrum). Computer simulations have been performed to understand the characteristics of the MV cepstrum. Both mathematical approach and computer simulations confirmed that the MV cepstrum is a useful technique to detect impulse in noisy environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.340.1-340
• /
• 2002

The unbalance exciting force induced by HDD of lately getting higher speed is directly influenced by the rotational speed and the mechanical assembly allowance between disk and spindle motor, and which gives rise to the structure borne noise of the personal computer. The absolute unbalance mass of HDD needs to be measured and adjusted by the counter mass to control the unbalance exciting force effectively in the stage of assembling the disk and spindle motor. This study introduces the measurement methods of the magnitude of the absolute unbalance mass and the position of HDD by 2 accelerometers. The absolute unbalance mass can be obtained by the acceleration responses and the mobility of the mechanical part, while the position of the unbalance mass can e obtained by the rotation acceleration orbit.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.87-87
• /
• 2004

An air-conditioner has various noise sources such as a fan noise, a motor noise, and a vibration induced noise. To reduce these noise effectively, noise sources must be identified. Especially in this paper, the structure borne sound radiated from the motor bracket of the indoor air-conditioner is considered. To do this, the operational deflection shape, which is used for understanding of the behavior of the motor bracket at a particular frequency, is obtained and compared with the sound intensity, which is used for the noise identification. Through this study, the noise sources of indoor air-conditioner are defined and the effective noise reduction method is proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.582-587
• /
• 2011

Acoustic Emission(AE) is widely used for early detection of faults for rotating machinery in these days because of its high sensitivity. AE signal has to need for transferring to low frequency range for the spectrum analysis included the fault mechanism. In transferring process, we lose a lot of fault information caused by unusable signal processing method. Discrete Wavelet Transform(DWT) is a method of signal processing for AE signatures, but the pattern of its mother function is not optimized with AE signals. So, we can lose the fault information when we want to use the DWT for AE signal. Therefore, in this paper, we will propose a novel pattern for DWT mother function, which is optimized with AE signals. And it will be applied to compare the results of DWT by daubechie and novel pattern.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.358-360
• /
• 2014

For the several decades, various nanomaterials are broadly used in industry and research. With the growth of nanotechnology, the study of nanotoxicity is being accelerated. Particularly, mercury ion is widely used in real life. Because the mercury is representative high toxic material, it is highly recommended to detect the mercury ion. In previous reported work, thymine-thymine mismatches (T-T) capture mercury ion and create very stable base pair ($T-Hg^{2+}-T$). Here, we performed the high sensitive sensing method for direct label free detection of mercury ions and DNA binding using Kelvin Probe Force Microscope (KPFM). In this method, 30 base pairs of thymine (T-30) is used for mercury specific DNA binding ($T-Hg^{2+}-T$). KPFM is able to detect the mercury ion because there is difference between bare T-30 DNA and mercury mediated DNA ($T-Hg^{2+}-T$).

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3136-3138
• /
• 2000

마이크로머시닝을 이용한 각속도 센서에서는 기계 구조체의 기준진동에 의한 캐패시턴스의 변화와 인가되는 각속도에 따른 캐패시턴스의 변화를 감지하야 한다. 이러한 캐패시턴스의 변화량을 전기적으로 감지하는데 있어서 기준진동을 위해 구조체에 인가되는 구동신호의 간섭이 최소화 되도록 구조체를 설계하여야 하고 회로적으로 간섭을 상쇄할 수 있어야 미소한 캐패시턴스의 변화량을 감지하여 각속도 센서의 감도를 극대화할 수 있다. 본 논문에서는 이러한 구동신호의 간섭을 상쇄하여 미소캐패시턴스 변화를 감지하는 회로를 설계 하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2022-2024
• /
• 2003

본 논문에서는 진동형 마이크로 자이로스코프를 위한 폐루프 제어기를 설계하였으며 실험을 통하여 설계된 제어기의 성능을 검증하였다. 일반적으로 진동형 자이로스코프를 동작시키기 위해서는 구동축과 검출축의 공진 모드가 일치되도륵 설계를 하며 높은 감도를 얻기 위해서는 이 두 모드의 Q값이 클수록 유리하다. 하지만 이러한 개루프 상에서 동작 하에서는 대역폭과 선형성 등의 성능에 제약을 가져오게 되며 이를 개선하기 위해 폐루프 제어기가 필요하다. 본 논문에서는 진공도에 따른 Q값의 변화와 이에 따른 제어기의 성능을 분석하였으며 실험 결과로부터 설계된 제어기가 만족할만한 성능의 개선을 가져옴을 확인하였다.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.416-419
• /
• 2018

본 논문에서는 운전자의 편의를 위해 직관적인 방향 정보를 햅틱 정보로 전달하기 위한 시스템을 제안한다. 제안하는 시스템을 구현하기 위해, 햅틱 진동에 방향성을 추가하기 위한 햅틱 기술을 적용하였다. 제안하는 시스템의 작동 과정은 인지와 햅틱 신호 생성으로 나누어지며, 그 과정은 다음과 같다. 인지 과정에서는 차량의 양 측면에 달린 카메라를 이용해 차선을 검출한다. 또한 상단에 부착된 라이다 센서를 이용해 장애물의 방향과 거리를 판단한다. 동적 햅틱 신호 생성 과정에서는 인지된 정보들을 활용하여 차선 이탈과 장애물 충돌의 경보를 구분할 수 있고, 방향성을 포함하는 동적 햅틱 신호가 생성된다. 생성된 신호는 스티어링 휠과 시트에 부착된 진동 모터를 통해 전달된다. 이러한 기능을 갖는 시스템은 로봇을 사용한 시뮬레이션 환경에서 진행되었다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1057-1058
• /
• 2007

This paper proposes an alternative vibration detection method in a squirrel-cage induction motor using flux sensors. The air-gap flux will be changed when mechanical vibration occurs by bearing fault as well as broken rotor bar and air-gap eccentricity. For detecting those flux variations due to vibration, search coils are installed at stator slots. The induction motor with 380 [V], 7.5 [kW], 4 [Poles], 1,760 [rpm] ratings is used. Magnitudes and distortion of the induced voltage from flux sensors are used to discriminate faulted types. As a result, the flux sensor has been proven to be useful for vibration detection. It is compared to the result with vibration sensor as well.