• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.11-18
• /
• 2012

Deterioration and weakening is advanced in compliance with flowing of time and the change of environment in RC structures. Consequently, strength and serviceability decreases, finally, the life of infrastructure shortens and safety characteristics decreases. Accordingly, in this study, a new method to develop a strengthening method using the vacuum impregnation, which increases durability of the infrastructure occurred the safety reduction due to the performance degradation and increases the life of infrastructure by improving the durability compared to the existing method, was planned. For flexural tests, the maximum strength was a low-end order from high order as follows: (1) vacuum impregnation with 2 fold reinforcement, (2) fiber sheet 2 fold reinforcement, (3) vacuum impregnation with 1 fold reinforcement, (4) fiber sheet 1 fold reinforcement, and (5) nothing. Also, for confirmation results about durability, when the fiber reinforcement is being exposed to the inferior environment, the remaining tensile strength exceeded of 90% or more for all environments. This is because the reinforcement used in this research shows the excellent resistance in severe environment.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.792-797
• /
• 2015

In this study, three softwood species were treated with water-soluble melamine resin by different concentration and treatment time under vacuum pressure for improving mechanical property, abrasion resistance, and incombustibility. After the treatment, a compreg was manufactured and then evaluated on physical properties. Additionally, incombustibility of compreg was determined by comparing with a wood that was treated by spraying a water-soluble fire retardant on surface. As concentration of resin increased, bending strength and Brinell hardness increased as well as abrasion resistance, but there was no correlation on treatment and mechanical properties by treatment time. The wood impregnated by water-soluble melamine resin under vacuum pressure showed better incombustibility than that of a water-soluble fire retardant sprayed wood. Therefore, this treatment could be used for improving incombustibility of wood.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2020

This study examined the applicability of the vacuum impregnation post-processing to enhance the strength of binder jet 3D printed output. In addition, permeability, bulk density, and compressive strength of 10 mm, 20 mm, 30 mm, and 40 mm cubic specimens were examined to check the strength limit depending on the 3D prined output size. In result, as the maximum pressure increased, the post-processing storage solution permeated to the inside of the 3D printed sample and thus the permeation area ratio was improved. The compressive strength and the permeation area indicate the correlation between the exponential function of the adjusted R-square factor 0.992. In addition, the bulk density was increased, which can be inferred as the post-processing solution permeated to the inside. In conclusion, in order to enhance the compressive strength of the binder jet 3D printed output, it is essential to permeate the post-processing solution to the inside of the output, and vacuum impregnation can be proposed as an effective method.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.91-100
• /
• 2011

This study is to examine the PEG concentration, and drying humidity and drying periods of humidity-controlled drying(HCD) for conservation of waterlogged woods(Pinus densiflora S. et Z.), and dimension stability of HCD were compared with those of air-drying and vacuum freeze-drying(VFD). Dimension stability of vacuum freeze-drying was the most excellent, i.e., PEG crystal was uniformly distributed in woods. Increasing concentrations of PEG, dimension stability of HCD was increased and drying periods decreased. Dimension stability of HCD after the treatment with the high concentration(70%) of PEG soaking was similar to those of VFD after the treatment with the low concentration(40%) of PEG soaking. In conclusion, high concentration(about 70% in water) PEG solution was the most suitable as a pre-treatment for HCD of waterlogged woods. However, drying should be maintained with enough high humidity and longer period.

• 보존과학연구
• /
• s.35
• /
• pp.45-55
• /
• 2014

The small dining tables which are made of bamboo were deteriorated condition when those were excavated from Mado shipwreck No.1. Therefore, preliminary test was conducted for consolidation (Sucrose, Dammar gum, Cetyl alcohol and Polyethylene glycol 4000) then impregnated and vacuum freeze dried. After the test, since the treatment with vacuum freeze drying using an aqueous solution of PEG 4000 keep the shape well the most and present bright colour, waterlogged archaeological bamboo conserved with vacuum freeze drying using an aqueous solution of PEG 4000. One bamboo table consolidated with soluble PEG 4000 from 10% to 40%, then vacuum freeze dried. Another impregnated with soluble PEG 4000 from 10% to 70%. After that, it was separated and held in polycarbonate sheet for preventing bending during dry. The small dining tables are the three dimensional shapes and have some loss. Therefore the mounting for support tables were necessary which are made of acrylic sheet. It keep the table shape and make it convenient for storage and handling.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.327-333
• /
• 2015

To measure the dimensional stability of three softwoods by vacuum pressurization of water soluble melamine-formaldehyde (MF) resin impregnation process, properties of resin treated compressed woods (compregs) were measured after impregnating the water soluble MF resin into three coniferous wood species for different impregnation times and resin concentrations. As the resin concentration was higher and impregnation time was longer, coefficients of volumetric shrinkage and anti-volumetric swelling efficiency increased, but coefficients of volumetric swelling, anti-volumetric swelling efficiency and absorption decreased. Also, weight percent gain increased remarkably as the resin concentration was high, but there was no uniform relationship with impregnation time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.289-289
• /
• 2013

CRFP (carbon fiber reinforced plastics)는 탄소섬유 직물에 수지를 함침시켜 만들어지며, 고강도, 고탄성을 지니면서도 가볍고 밀도가 낮기 때문에 항공우주, 스포츠 용품 등 다양한 분야에서 활용되고 있다. 탄소섬유와 수지의 결합력을 증가시키기 위해 사이징, $HNO_3$ 산화, 전기화학적 산화, 플라즈마 처리 등의 다양한 탄소섬유 표면처리 방법이 개발되고 있다. 본 연구에서는 복합재의 강도향상을 위해 탄소섬유 직물을 마이크로웨이브 알곤 플라즈마로 처리하여 강도변화를 관찰하였다. 플라즈마 처리된 직물은 열가소성수지인 CBT와 함침시켜 탄소섬유 복합재로 제조하였다. 그 결과 플라즈마 처리한 복합재의 강도 향상을 확인할 수 있었고, SEM(scanning electron microscope)을 통해 복합재의 표면이 거칠어진 것을 관찰할 수 있었다. 플라즈마로 인해 직물의 표면적이 증가하여 직물의 표면과 수지의 결합력이 증가한 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.182.1-182.1
• /
• 2016

전자빔의 운동에너지를 변화시켜 전자기장을 발생시키는 진공튜브 장치는 기본적으로 전자빔 발생부인 전자총을 핵심 구성부로 사용한다. 이러한 전자총을 이용하는 진공튜브로는 핵융합을 위해 플라즈마 가열용의 RF를 발생시키는 자이로트론 튜브와 방사광 가속기에서 전자를 가속시키는데 이용되는 클라이스트론 튜브 등이 있으며, 군사적으로는 레이더를 비롯하여 유도미상일에 들어가는 탐색기, 전투기에서 사용되는 송수신용 마이크로파 발생장치 등의 핵심부품인 진행파관 진공튜브 등이 있다. 이러한 응용분야에서는 기본적으로 고출력의 전자파를 필요로 하기 때문에 반도체를 이용한 장치로는 그 성능을 구현할 수 없다. 따라서 열음극을 사용하는 전자총을 기반으로 한 다양한 형태의 진공튜브 장치가 주로 이용되고 있다. 현재 고출력 마이크로파 진공튜브용 열음극 전자총은 대부분 외국에서 수입하고 있는데 그 이유는 전자총의 핵심 부품인 열음극 캐소드를 국내에서 개발하지 못하였기 때문이다. 하지만 본 연구에서는 텅스텐 기반의 함침형 열음극 캐소드를 국내에서 자체 개발하는데 성공하였다. 전통적으로 미국에서 개발해온 함침형 열음극 캐소드는 텅스텐 소결체에 기공을 학보하고 여기에 Ba을 중심으로 한 알칼리성 물질들을 일정비율로 혼합하여 함침한 것으로 일함수 2.1~2.3 eV 수준의 물성을 갖는다. 이에 따라 방출할 수 있는 전류의 양은 운용 온도 $1000^{\circ}C$ 정도에서 전류밀도로 대략 수 $A/cm^2$ 수준이다. 본 연구에서 개발한 캐소드는 S-type으로 알려진 것으로 BaO : CaO : $Al_2O_3$ = 4 : 1 : 1 비율로 함침되었다. 고진공장치에서 전류측정 결과 $1040^{\circ}C$에서 $10.6A/cm^2$의 전류밀도를 기록하였으며 이에 대하여 Richardson-Dushman equation으로 계산하였을 때, 약 1.9 eV의 일함수를 갖는 것을 알 수 있었다. 이는 현재 많은 응용분야에서 사용하고 있으며 함침형 캐소드에 Os이나 Ir 등의 물질을 코팅하여 일함수를 낮추고 전류밀도를 향상시킨 M-type 캐소드의 결과와 유사한 수준이다.

• Journal of Conservation Science
• /
• v.21
• /
• pp.49-58
• /
• 2007

Among the treatment results of test samples of the antique lacquer-ware, the treatment with PEG#3,350 40% solution displayed excellent effect with low shrinkage ratio; in weight gain the treatment with Sucrose 19%+Glycerin 1%(t-butanol 5% in water) solution showed consistent increase. However during the impregnation process of Sucrose, the weight of the testing samples decreased by dehydration because the inner part of the test samples and the treatment solution showed concentration gradient. Therefore, we concluded longer impregnation period should be necessary to prevent dehydration. Since both higher and lower molecular weight treatment chemicals could penetrate into the wood of the lacquer-ware, air drying and conditioning after impregnation treatment with high concentration chemicals would be possible, as well as vacuum freeze-drying.

• 핵융합뉴스레터
• /
• s.47
• /
• pp.14-15
• /
• 2010

1997년부터 KSTAR 장치 개발에 참여해 진공함침금형과 KSTAR 토카막 주장치 조립을 위한 공학설계 및 조립과 제작 등을 성공적으로 수행한 (주)SFA(대표이사 배효점)는 국가핵용합연구소를 위시한 국가 연구소와 삼성, 현대, LG 그룹 및 POSCO 등 국내 대기업과 해외 총 15개국에 납품실적과 단독공사 수행 경험을 보유한 종합엔지니어링 회사로 KSTAR 참여를 통해 향후 핵융합발전소 건설에도 중추적인 역할을 할 것으로 기대를 모으고 있다.