• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.31-37
• /
• 2003

Flat-sawn 32 mm-thick boards of Populus alba×P. glandulosa, one of major plantation species in this country, were dried in conventional, high-temperature and microwave-vacuum (MW/V) kilns. The average green specific gravity of the specimens used in this study was 0.349±0.074. Their average green moisture contents of heartwoods and sapwoods were around 200% and 100%, respectively. From green to oven-dry they shrunk 2.4 and 7.3% in radial and tangential directions, respectively, and there was no discrepancy between heartwoods and sapwoods. It took 65, 35 and 22 hours to dry from green to 10% moisture content in conventional, high-temperature and MW/V kilns, respectively. A colorimetry study showed that the surface color of the specimens dried in a MW/V kiln was clearer and lighter than those in other kilns.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.187-192
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.39-39
• /
• 2000

당사는 1996년 SPUTTERING SYSTEM 제작을 시작으로 하여 진공관련장치 및 부품을 제작, 납품하는 기업입니다. 그 동안 산업체 및 대학, 연구소 등에 제작 납품된 품목은 양산용SPUTTER 연구실험용SPUTTER, ION PLATING, RIE SYSTEM, E-BEAM 증착기 산업용 AL-EVAPORATOR, 산업용 AIP SYSTEM, 고온열처리로, 진공건조장치 진공 배기SYSTEM, 기타 진공관련장치가 있으며 진공부품으로는 OIL ROTARY PUMP, DIFFUSION PUMP, VALVE 및 배관부품 등이 있습니다. 그밖에 취급하는 품목으로는 진공게이지류 및 터보펌프를 판매하고 있습니다. 일부 장치는 기술력을 인정받아 일본, 동남아시아, 중국 등에 수출되었습니다. 당사는 항상 고객이 필요로 하는 진공응용장치를 다년간 축적된 제조기술과 연구력을 바탕으로 만족스러운 제품을 공급하고 있기에 이를 소개하고자 합니다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.460-469
• /
• 2010

In spite of the global-class aquaculture and fishing technology of our country, the processing technologies are lags behind the other nations relatively. The processed marine products are mainly frozen foods, canned goods, salty food (fermented fish products), fish paste products (boiled fish paste), and we can see that the high-value dehydrated foods by drying are very few. These problems are considered to be caused directly by the lack of drying technologies. This paper is concerned to the experimental results of drying heat transfer characteristics for the green energy type vacuum dryer for the high quality sea foods production.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.3
• /
• pp.588-594
• /
• 2001

The aim of this paper is to develop the low temperature vacuum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation Usally operations just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressure as low 50 mmHg abs. The lowers the boiling point to $39^{\circ}C$ The experimental data of quantitative analysis for using practically were obtained by the constant drying rate period and reducing drying rate period according to the temperature of hot water which is the experimental parameters of present experiment. As the results, it took about 20 hours for material to reach about 18% of the final moisture content is order to store products for a long time about 450% of the early moisture content at the beginning of drying and maximum drying rate comes to about 0.30 kg/m2hr at about 350% of the moisture content.

• Journal of Power System Engineering
• /
• v.15 no.3
• /
• pp.46-51
• /
• 2011

Low temperature vacuum drying technique, whose drying time and quantity of exhausting energy is about 25~30% of hot air drying, is very excellent in the drying efficiency. This paper is made out in the aspects of heat engineering with the object of developing Korean drying machine which can dry once a large quantity of objects to be dried in the state of low temperature and vacuum. As the results, it took about 17 hours(3~4 days in case of hot air drying) for material to reach about 18% of the final moisture content in order to store products for a long time, from about 78~80% of the early moisture content at the beginning of drying, and maximum drying rate comes to about 0.35 kg/m2hr at about 400% of the moisture content.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.24-29
• /
• 2006

This study was carried out to promote aspects of preservation and convenience of red pepper paste (r.p.p.). Sample was prepared with spray drying (s.d), vacuum drying (v.d) and freeze drying (f.d) methods. The prepared powdered samples were stored for 90 days at $35^{\circ}C$ in seal condition. After powdered samples were hydrated, the samples were used for analysis such as a sensory test, texture, color and changes of component According to sensory test, quality of dried red pepper paste were better in order to f.d.r.p.p. < s.d.r.p.p. < v.d.r.p.p. Changes of pH, reducing sugar, amino nitrogen and NaCl of dried r.p.p. were not observed compared to control but viscosity decreased by about $15\%$ During the storage, acidity decreased by about $15\%$ and reducing sugar, amino nitrogen and ethanol decreased slightly. Hunter L, a and b values decreased from 24.8-27.3 to 23.6-24.4, from 10.8-12.0 to 8.3-9.3 and from 7.1-7.9 to 4.4-5.5, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.192-199
• /
• 2009

This study was carried out to investigate the performance of a radio-frequency/vacuum dryer combined with a mechanical compressive load (RF/VC) with a scale of about $3m^3$ during drying board of Azobe (Lophira alata) and Korean red pine (Pinus densiflora). The degree of vacuum of the RF/VC system was maintained at 80~105 torr, and wood temperature was increased from $40^{\circ}C$ at the beginning of drying to $60^{\circ}C$ at the end of drying and the radiofrequency generator was operated with schedule of 7 minute-ON and 3 minute-OFF. The wood temperatures near charge plate always remained higher than those of the control during all of the drying stage, whereas the wood temperature near ground plate always remained lower than those of the controlled. As drying time proceeding, the temperature of the wood near ground plate presented lower than those of the control. Whereas the temperature of the wood near charge plate presented higher than those of the controlled. The final average moisture contents of the Azobe boards stacked near the input side of the RF generator showed slightly lower than those near the opposite side. Those of the wood stacked in the layers near the charge plate were lower than those of near the ground plate. The average length of surface checks of the Azobe boards stacked near the charge plate was very slight, whereas that toward the ground plate represented high values. The efficiency of input energy was simliar with the commercial systems.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.307-312
• /
• 1989

Internal mass transfer during osmotic dehydration of carrots in sugar solutions was examined as a function of concentration, temperature and immersion time of those solutions using moisture loss, sugar gain, molality and rate parameter. Influence of osmotic dehydration and blanching on browning reaction of vacuum dried carrots(3% MC: wet basis) was also evaluated. Increasing the concentration and temperature of sugar solutions increased moisture loss, sugar gain, molality and rate parameter. Water loss and sugar gain were rapid in first 4 min and then levelled off. The rate of sugar gain and molality changes on temperature was significant in lower concentration$(20^{\circ}\;Brix)$ compared to higher concentration$(60^{\circ}\;Brix)$. The changes of rate parameter were affected by concentration than by temperature of sugar solutions. Moisture loss during osmotic dehydration using a sugar solution $(60^{\circ}\;Brix,\;80^{\circ}C)$ with 20min immersion time was 55.7%. Effect of osmotic dehydration and blanching before vacuum dried to 3% MC(Wet basis) on browning reaction was significant. Minimum browning reaction during vacuum drying was carried out using pretreatments such as osmotic dehydration in sugar solution$(40^{\circ}\;Brix,\;80^{\circ}C)$ with 16 min immersion time(O.D.=0.09) and blanching with 12 min immersion time at $80^{\circ}C$(O.D.=0.31) compared to control(O.D.=1.59).

• 보존과학연구
• /
• s.35
• /
• pp.45-55
• /
• 2014

The small dining tables which are made of bamboo were deteriorated condition when those were excavated from Mado shipwreck No.1. Therefore, preliminary test was conducted for consolidation (Sucrose, Dammar gum, Cetyl alcohol and Polyethylene glycol 4000) then impregnated and vacuum freeze dried. After the test, since the treatment with vacuum freeze drying using an aqueous solution of PEG 4000 keep the shape well the most and present bright colour, waterlogged archaeological bamboo conserved with vacuum freeze drying using an aqueous solution of PEG 4000. One bamboo table consolidated with soluble PEG 4000 from 10% to 40%, then vacuum freeze dried. Another impregnated with soluble PEG 4000 from 10% to 70%. After that, it was separated and held in polycarbonate sheet for preventing bending during dry. The small dining tables are the three dimensional shapes and have some loss. Therefore the mounting for support tables were necessary which are made of acrylic sheet. It keep the table shape and make it convenient for storage and handling.