• Nuclear Engineering and Technology
• /
• v.9 no.2
• /
• pp.65-74
• /
• 1977

The radiation-induced graft polymerization of acrylic acid onto polyester fabric was investigated with accelerated electron beams as ratiation source at high dose rates. Homopolymerization was suppressed by addition of cations which is known as homopolymerization inhibitor, but this practical advantage was obtained at the expense of grafting efficiency. The rate of grafting (%/sec) was proportional to the 0.82th power of dose rates over the range from 1.6$\times$10$^{6}$ to 10$\times$10$^{6}$ rad/sec. The grafted polyester fabric showed considerable improvement in moisture regain and antistatic properties.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.65-72
• /
• 2007

Large-scale direct shear tests were conducted in order to investigate both the shear strength of soil itself and the friction behavior at the interface of soil/geosynthetics in respect of efficiency in this study. Sand, crushed stone and three types of geotextile (i.e. one woven geotextile and two nonwoven geotextiles) were used in the experimental program. The considered interfaces for the evaluation of interface shear strength in this study included sand/sand, crushed stone/crushed stone, sand/woven geotextile, crushed stone/woven geotextile, crushed stone/nonwoven geotextile-A and crushed stone/nonwoven geotextile-B. The results showed that the efficiency of 84% was obtained at the interface of sand/woven geotextile compared with the shear strength of sand itself (i.e. sand/sand interface). The efficiencies of 74%, 83% and 72% were obtained at the interface of crushed stone/nonwoven geotextile-A, crushed stone/nonwoven geotextile-B and crushed stone/woven geotextile, respectively compared with the shear strength of crushed stone itself (i.e. crushed stone/crushed stone interface).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.73-87
• /
• 1996

The mechanical properties of 2D ceramic composites fabricated bythe newly developed powder infiltration and subsequent multiple impregnation process were characterised by both 3-point flexure and tensile tests. These tests were performed with strain gauge and acoustic emission instrument. The woven fabric composites used for the test have the basic combinations of $Al_{2}$$O_{3}$ fabric/$Al_{2}$$O_{3}$ and SiC fabric (Tyranno)/SiC. Uniaxially aligned SiC fibre(Textron SCS-6)/SiC composites were also tested for comparison, The ultimate flexural strength and first-matrix cracking stress of SiC fabric/SiC composite with 73% of theoretical density were about 300 MPa and 77 MPa respectively. However, the ultimate tensile strengths of composite were generally one third of flexural strengths, and first-matrix cracking stress in a tension test was also much lower than the value obtained from flexure test. The lower mechanical properties measured by tension test were analysed quantitatively bythe differences in stressed volume using Weibull statistics. This showed that the ultimate strength and the firs-tmatrix cracking stress of woven laminate composites were mainly determined bythe gauge length of fibres and the stressed volume of matrix respectively. Incorporation of SiC whiskers into the matrix increased first-matrix cracking stress by increasing the matrix failure strain of composites.

• Nuclear Engineering and Technology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1978

The radiation-induced graft polymerization of methacrlic acid and methyl methacrylate onto a polyester fabric was investigated with ${\gamma}$-ray as the radiation source, and the rate of grafting was examined. When acrylic acid, methacrylic acid, and methyl methacrylate were grafted onto a polyester fabric, grafting efficiency was depened upon the dielectric constant of the solvent in the monomer mixture. The yield of the graft polymerization was related to the total dose, the concentration of the monomer, and the concentration of the swelling agent. The melting point and the glass transition temperature of MA and MMA grafted copolymers were analysed by means of DTA. Physical properties, such as the moisture regain, the antistatic property, and the wicking time were measured.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.41-49
• /
• 2008

This study was carried out the model experiment in laboratory to evaluate the bearing capacity improvement of soft ground as altered constraint condition of reinforcements according to geotextile, georid, steel bar. As a results, the value of BCR was increased linearly as improvement of the stiffness of reinforcements, and the factor governed the increasement of BCR was the increasement of frictions between reinforcement and clay as far as the constrain conditions increased until T=85.6kg. Moreover, An angle of inclination, ${\theta}$, between reinforcement and horizontal surface was distributed from $38^{\circ}$ to $50^{\circ}$ for Geotextile, from $45^{\circ}$ to $50^{\circ}$ for Geogrid and from $14^{\circ}$ to $16^{\circ}$ for steel bar. A radius of heaving, r, of clay ground by vertical weight at side was distributed from 0.6m to 0.7m for Geotextile, from 0.5m to 0.8m for Geogrid, and from 2.4m to 3.0m for steel bar. In case of steel bar, r was 4 times that of Geotextile.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.309-310
• /
• 2003

활성탄소 (activated carbons, ACs)는 넓은 비표면적을 가지고 있어 흡착용량이 크며, 발달된 미세공을 가지고 있기 때문에 오염물질의 제거능력이 높을 뿐만 아니라 경제적, 환경 친화적인 측면에서도 유리하다. 특히 섬유화된 할성탄소섬유 (activated carbon fibers, ACFs)는 균일한 세공이 표면에 노출되어 있어 흡착속도가 빠르며, 안정성과 재생성이 좋고 섬유상이기 때문에 가공이 용이하며 직포, 부직포, 시트 등의 형태로 만들어져 용매회수, 공업제품의 정제, 오폐수의 처리시설, 소각시설의 유해 배기가스의 흡착등에 널리 사용되고 있다.[1,2] (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.362-363
• /
• 2003

직포매트(Woven Ggeotextiles)는 연약지반 보강, 도로포장 등에 주로 사용되고 있지만, 간척지 지반 공사 및 해안지역 LNG 저장고 공사 둥에도 보강용 및 오탁방지막의 막체로도 이용되고 있다 한편, 장기간 시공의 경우 현장에서 대부분 커버를 씌운 상태로 야적, 보관되거나 일차 포설된 채로 한달 이상 경과하는 경우도 발생하게 되어 일광이나 자외선 등에 노출된 채로 있기 때문에 설계 인장강도의 저하를 초래하거나 열수축에 의한 치수변형이 발생하기도 한다. (중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.333-340
• /
• 1997

• The monthly packaging world
• /
• s.154
• /
• pp.108-109
• /
• 2006

PVA필름은 휴대폰, 카메라폰, 컴퓨터모니터, LCD TV등 편광필름이 사용되는 TFT-LCD 제품에는 반드시 필요한 핵심부품으로, 최근 인조대리석 제조용 필름, 분리필름, 내(耐)산소투과성 포장필름 등에도 활용범위를 넓혀가고 있는 신소재이다. 그러나 PVA필름은 일본이 PVA특성조절기술을 갖고 있어 그동안 일본에서 전량 수입해 사용해 온 것이 현실. 지난 1990년 설립된 이래, 국내 최초로 순수국내 기술로 고온수용성 부직포를 개발하며, 생산해 온 (주)텍스테크(대표이사 신재균)가 폐 부직포를 재활용해 LCD용 폴리비닐알코올(PVA) 필름을 제조하는 기술을 개발, 업계의 주목을 끌고 있다. 신재균 사장을 만나 폐부직포를 이용한 PVA 필름제조 기술개발 경위와 기대효과를 들어보았다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.303-304
• /
• 2003

토목합성재료 중 부직포 및 직포 지오텍스타일이 지반구조물에 적응될 경우 구속하중 부가 시 흙과의 마찰로 인한 마모에 의해 지오텍스타일의 표면손상이 발생하게 되면 강도저하가 발생하여 구조물의 안정성에 중요한 영향을 미치게 된다. 일반적으로 지오텍스타일과 흙과의 마찰특성평가는 직접전단시험이나 인발시험에 의해 평가되지만, 이들 시험 모두 구속하중에 의한 전단 및 인발변형을 해석할 뿐이며, 마모에 의한 지오텍스타일 표면 손상이나 변화는 거의 고려되지 않는 실정이다. (중략)