• Journal of Life Science
• /
• v.31 no.9
• /
• pp.796-805
• /
• 2021

Hepatic endoplasmic reticulum (ER) stress contributes to the development of steatosis and insulin resistance. The components of unfolded protein response (UPR) regulate lipid metabolism. Recent studies have reported an association between ER stress and aberrant cellular lipid control; moreover, research has confirmed the involvement of sterol regulatory element-binding proteins (SREBPs)-the central regulators of lipid metabolism-in the process. However, the exact role of SREBPs in controlling lipid metabolism during ER stress and its contribution to fatty liver disease remain unknown. Here, we show that SREBP-1c deficiency protects against ER stress-induced hepatic steatosis in mice by regulating UPR, inflammation, and fatty acid oxidation. SREBP-1c directly regulated inositol-requiring kinase 1α (IRE1α) expression and mediated ER stress-induced tumor necrosis factor-α activation, leading to a reduction in expression of peroxisome proliferator-activated receptor γ coactivator 1-α and subsequent impairment of fatty acid oxidation. However, the genetic ablation of SREBP-1c prevented these events, alleviating hepatic inflammation and steatosis. Although the mechanism by which SREBP-1c deficiency prevents ER stress-induced inflammatory signaling remains to be elucidated, alteration of the IRE1α signal in SREBP-1c-depleted Kupffer cells might be involved in the signaling. Overall, the results suggest that SREBP-1c plays a crucial role in the regulation of UPR and inflammation in ER stress-induced hepatic steatosis.

• Composites Research
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2021

VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.45-50
• /
• 2021

In this paper, we propose the development of a smart space security device that can be opened and closed remotely using IoT. Existing space security devices can control opening and closing by breaking hardware or only using button devices or replicated keys. The recent COVID-19 crisis has created several applications for non-contact devices. In this study, we propose the development of a small space security device that has the function of unlocking through an app without touching the device. By transferring the control authority to a smartphone, device that cannot be opened or closed by only operating hardware at the user's option. It is convenient and hygienic because it can be opened and closed using an app without touching the locking device. Multiple security is possible because security can be released using an app after user authentication by fingerprint recognition and pattern input on a smartphone. If the user wishes, after using the app security, the security is released by directly touching a button installed in the safe or space or opening it with a key. In addition, by adding an inactive function to the app, it is designed so that the door of the safe cannot be opened when the key is lost or the small safe is lost. This study is expected to be able to effectively expand the security system by applying variously to objects that require security.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.447-456
• /
• 2021

This study analyzed 28 domestic and foreign studies related Prompts for Restructuring Oral Muscular Phonetic Targets treatment techniques from 1984 to 2020 to prepare basic data for the development of PROMPT intervention programs and examination tools. According to the analysis, continuous research has been conducted since 1984 when the prompt study was first started, and the method of research was 16 intervention studies, with the highest number of speech disorders, and the target age being 3 to 5 years old, the most frequently conducted for infancy. The treatment was the most frequent in the 16th sessions, and the activities were based on the Motor Speech Hierarchy(MSH), except for the subjects of the non-verbal autism spectrum disorder. According to the analysis of the dependent variables, 'speech production' was the most common, followed by 'speech motor control', 'articulation', and 'speech intelligibility' were highest. Combined with all these studies, it suggests that PROMPT, which are directly useful for exercise spoken word production, are effectively being used outside the country and that it is necessary to develop a PROMPT program that can be applied domestically, in Korea.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.857-862
• /
• 2021

Recently, rapid climate change has had a significant impact on the bee ecosystem. The decrease in the number of bees and the change in the flowering period have a huge impact on the harvesting of beekeepers. Accordingly, attention is focused on smart beekeeping, which introduces IoT technology to beekeeping. According to the characteristics of beekeeping, it is impossible to continuously observe the beehive in the hive with the naked eye, and the condition of the hive is mostly dependent on knowledge from experience. Although a system that can measure partly through sensors such as temperature/humidity change inside the hive and measurement of the amount of CO2 is applied, there is no research on measuring the movement path and amount of movement of bees inside the beehive. Part of the migration of honeybees inside the hive can provide basic information to predict the most important cleavage time in beekeeping. In this study, we propose a device that detects the movement path of bees and measures and records data entering and exiting the hive in real time. The device proposed in this study was developed according to the honeycomb standard of the existing beehive so that beekeeping farms could use it. The development method used a photodetector that can detect the movement of bees to configure 16 movement paths and to detect the movement of bees in real time. If the measured honeybee movement status is utilized, the problem of directly observing the colony with the naked eye in order not to miss the swarming time can be solved.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.697-702
• /
• 2023

Recently, with the introduction of drones, a core technology of the 4th industrial revolution, various convergence education using drones is being conducted in school education sites. In particular, drone theory and practice education is being conducted in connection with free semester classes and career exploration. The drone convergence education program has higher learner satisfaction than simple demonstration and practice education, and the learning effect is high due to direct practical experience. However, since practical education is being conducted for a large number of learners, it is impossible to restrict and control the flight of a large number of drones in a limited place. In this paper, we propose a monitoring system that allows the instructor to monitor multiple drones in real time and learners to recognize collisions between drones in advance when multiple drones are operated, focusing on education operated in schools. The communication module used in the experiment was equipped with GPS in Murata LoRa, and the server and client were configured to enable monitoring based on the location data received in real time. The performance of the proposed system was evaluated in an open space, and it was confirmed that the communication signal was good up to a distance of about 120m. In other words, it was confirmed that 25 educational drones can be controlled within a range of 240m and the instructor can monitor them.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.30-37
• /
• 2023

The PSCB girder bridge is a closed cross-section in which the top and bottom flanges and the web are integrated, and the structural characteristics are generally different from the bridges in which the girder and the floor plate are separated, so a maintenance plan that reflects the characteristics of the PSCB girder bridge is required. As a result of analyzing damage types by collecting detailed safety diagnosis reports of highway PSCB girder bridges, most of the deterioration and damage occurring during use is concentrated on the top flange. In particular, cracks in the bridge direction on the underside of the top flange occurred in about 70 % of the PSCB girder bridges to be analyzed, and these cracks were judged to be caused by indirect loads such as heat of hydration and drying shrinkage rather than structural cracks caused by external loads. In order to improve durability and reduce maintenance costs of PSCB girder bridges in use, it is necessary to control restraint drying shrinkage cracks from the design stage. Therefore, in this paper, the cracks caused by drying shrinkage under restraint, which is the main cause of cracks under the flanges of the top part of the PSCB girder bridge, were directly calculated using the Gilbert Model, and the influencing factors such as the amount of reinforcing bars, diameter and spacing of reinforcing bars were analyzed. As a result of the analysis, it was found that the crack width caused by restraint drying shrinkage exceeded the allowable crack width of 0.2 mm for reinforcing bars with a reinforcing bar ratio of 0.01 or less based on the H16 reinforcing bar and a reinforcing bar with a diameter greater than H19 based on the reinforcing bar ratio of 0.01. Finally, based on the results of the crack width review, a method for controlling the crack width of the top flange of the PSCB girder bridge was proposed.

• Advanced Industrial SCIence
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2023

Since silicone rubber heaters are flexible, they can be directly attached or installed in objects to be heated even in flat, curved or three-dimensional shapes. Since the current heating method heats the entire object to be heated and raises it to a required temperature, ignoring areas or positions where heat is not required, partial intensive heating cannot be performed. When using multi-heating zones, rather than heating the entire object to be heated, only the parts that need heat are intensively heated according to the process, so it is possible to heat quickly by local location by applying different amounts of heat with a small amount of electric capacity to each place that needs heat, and heat energy can reduce. In this study, the temperature and heating time of the partially concentrated region in the multi-heating region structure are measured so that a uniform temperature or temperature difference occurs in the region requiring thermal fusion. In order to determine the optimal power density range and reduce capacitance, the safety of a silicon rubber heater manufactured with a multi-heating zone structure is investigated. If the silicon rubber heater is manufactured in a multi-heating method, the multi-intensive heating technology can be ideally applied to all heating processes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.402-402
• /
• 2020

대청호는 1998년 조류경보제 도입 이후 1999년과 2014년을 제외하고 매년 조류 경보가 발령되었으며 2001년 조류 경보 '대발생'이 발령된 후 2017년 가장 높은 조류 발생 수치를 기록하였다. 상시 조류 발생 지역인 대청호 내 녹조를 제어하기 위해 비점오염원 발생원을 기준으로 우선관리지역을 선정하고, 각 지역의 특성을 반영한 관리대책을 제안하였다. 우선관리지역 선정을 위해 대청호 유역 내 오염총량 소유역을 기준으로 각 소유역의 농업 비점오염원의 발생부하량을 산정하고 유출을 고려한 가중치를 추가하였다. 본 연구에서는 농업 비점오염원을 크게 토지계 비점오염원과 축산계 비점오염원으로 분류하였으며, 토지계 농업비점오염원은 논, 밭, 과수원 지역으로 정의하였다. 발생부하량의 산정은 오염총량관리 기술지침(2019, 국립환경과학원)을 기준으로 하였으며, 토지계 발생부하량 산정을 위한 토지계 정보원으로 환경부에서 제작 및 배포하는 세분류 토지피복도를 축산계 발생부하량 산정을 위한 축산 두수는 2017년 기준 전국오염원조사 내 축산두수를 이용하였다. 토지계 비점오염원의 하천까지 유출을 반영하기 위해 각 소유역별 평균 경사도를 가중치로 이용하였으며, 축산계 비점오염원은 오염물질이 발생한 후 하천까지의 평균 유출 정도를 확인하여 가중치로 반영하였다. 실제 하천에 미치는 영향이 높은 지역에 대한 우선적인 관리를 위해 하천수 수질측정망에서 측정한 수질 데이터와의 비교를 통하여 최종 우선관리지역을 보청A03, 보청A05, 금본F14, 금본F22 소유역으로 선정하였다. 각 소유역에 대한 수질 관리목표를 확인하였으며, 지역의 특성을 분석하여 토지계 및 축산계 비점오염원에 대한 적절한 관리대책을 제안하였다. 본 연구에서 사용한 수질 측정망 데이터가 각 소유역보다 적게 분포하여 소유역에서 발생한 비점오염물질이 하천에 미치는 영향을 직접 파악하는데 한계가 있었다. 또한, 축산계의 경우 발생한 비점오염물질이 모두 하천으로 유입되지 않으며, 축산계 비점오염원의 배출경로를 파악하는데 어려움이 있다는 한계를 가진다. 본 연구의 한계를 바탕으로 농림축산식품부 및 축협 등에서 구축하는 사육두수의 데이터를 이용하는 방법론 등의 추가적인 연구가 필요할 것으로 보인다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.910-914
• /
• 2023

With the technological innovation owing to the 4th industrial revolution, the maritime transportation is rapidly being developed with autonomous ships and systems. Particularly, autonomous ships will partially replace the manned ships and navigation among them remotely upon the degree of autonomy suggested by IMO. Accordingly, the remote operator and related research have increased as well. However, the data on the minimum required manpower for remote operators are lacking such as considering engage required situations and their co-occurrence probability. Therefore, this study proposes a simulation model that calculates the number of remote engage required situations by defining restricted water area and remote engage required situation as close-quarter situations based on accumulated trajectory data of actual ships. The findings are expected to be used as background materials to establish the appropriate manpower distribution of remote operators in remote operation centers.