• Title/Summary/Keyword: 직접 수치 모사

Search Result 150, Processing Time 0.031 seconds

Prediction of Thermal Expansion Coefficients for Fiber-Reinforced Composites by Direct Numerical Simulation (직접 수치 모사법을 이용한 섬유 강화 복합재료의 열팽창계수 예측)

  • Nam, Youn-Sic;Oh, Min-Hwan;Kim, Kwang-Sik;Cho, Jin-Yeon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.35 no.9
    • /
    • pp.771-777
    • /
    • 2007
  • In this paper, thermal expansion coefficients of fiber-reinforced composite materials are predicted by direct numerical simulation. From comparing the predicted results with experimental results, it is confirmed that direct numerical simulation gives similar results to the previously proposed methods while minimizing artificial assumptions. Additionally trend of variation in thermal expansion coefficients is investigated according to the fiber volume fraction.

Monte Carlo 모사, 그리고 분자동역학

  • 유동훈;이진호
    • Journal of the KSME
    • /
    • v.44 no.3
    • /
    • pp.55-63
    • /
    • 2004
  • 이 글에서는 마이크로와 나노스케일의 해석에 사용하는 수치모사 방법인 직접모사 몬테 카를로 (Direct Simulation Monte Carlo : DSMC)방법과 분자동역학(Molecular Dynamics: MD)과이 관계에 대하여 설명한다.

  • PDF

Comparison of FDDO and DSMC Methods in the Analysis of Expanding Rarefied Flows (팽창희박류의 분석에 있어서 FDDO와 직접모사법의 비교)

  • Chung C. H.
    • Journal of computational fluids engineering
    • /
    • v.1 no.1
    • /
    • pp.142-149
    • /
    • 1996
  • 이차원 노즐을 통하여 저밀도 환경으로 팽창하는 희박류의 분석에 있어서 불연속좌표법과 결합된 유한차분법(finite-difference method coupled with the discrete-ordinate method, FDDO)과 직접모사법(direct-simulation Monte-Carlo method, DSMC)이 비교되었다. FDDO를 이용한 분석에서는 충돌적분모델을 도입하여 간단해진 볼츠만식(Boltzmann equation)이 불연속좌표법을 이용하여 물리적 공간에서는 연속이나 분자속도 공간에서는 불연속좌표로 표시되는 편미분방정식군으로 변환되어 유한차분법에의하여 수치해석 되었다. 직접모사법에서는 분자모델로 가변강구모델(variable hard sphere model, VHS)이, 충돌샘플링모델로는 비시계수법(no time counter method, NTC)이 채택되었다. 전혀 다른 두 가지 방법에 의한 노즐 내부에서의 유체흐름 해석결과는 매우 잘 일치하였으며, 노즐 외부의 plume 영역에서는 FDDO에 의한 해석결과가 직접모사법에 의한 해석결과에 비하여 약간 느린 팽창을 보였다.

  • PDF

저궤도 상에서의 Ashen light 관측을 통한 통합적 광선 추적 수치 모사

  • Yu, Jin-Hui;Ryu, Dong-Ok;Kim, Seok-Hwan
    • Bulletin of the Korean Space Science Society
    • /
    • 2010.04a
    • /
    • pp.26.2-26.2
    • /
    • 2010
  • 이 연구는 Ashen light 측정을 통해 전 지구 반사율을 구하는 통합적 광선 추적 모델을 구성하고 그 수치모사 성능을 검증하는데 목적을 두고 있다. 통합적 광선 추적 모델은 태양-지구-달 시스템에 대하여 태양 복사에너지의 광경로를 추적함으로써 최종적으로 저궤도 상에 존재하는 광학계에 도달하는 Ashen light과 moonshine의 조도를 수치 모사하는 기법이다. Ashen light은 구형의 태양에서 출발한 $1.626\times10^{26}W$의 에너지를 가지는 400nm에서 700nm 파장대역의 빛이 램버시안 특성을 지니는 구형의 지구에서 반사된 후 램버시안 특성을 가지는 구형의 달에서 재 반사되어 저궤도상의 광학계로 입사하는 빛이고, moonshine은 달에서 직접 반사되어 저궤도상의 광학계로 입사하는 빛이다. 통합적 광선 추적 수치 모사를 이용하여 구한 Ashen light과 moonshine의 조도는 1차 근사 해석적 방법을 이용한 계산 결과와 측정 오차 범위 이내의 오차를 보였다. 최종 연구 결과 Ashen light과 moonshine의 조도를 이용하여 구한 지구 반사율과 1차 근사 해석적 방법을 이용한 지구 반사율 계산의 결과가 유사함을 증명하였다.

  • PDF

DNS of Drag-Reduced Turbulent Channel Flow due to Polymer Additives (폴리머 첨가제에 의한 항력감소 난류 채널 유동장의 직접수치모사)

  • Kim, Kyoung-Youn
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.8
    • /
    • pp.799-807
    • /
    • 2010
  • Direct numerical simulations (DNS) of turbulent channel flow for which the drag is reduced by using polymer additives have been performed by a pseudo-spectral method. The Reynolds number based on the friction velocity and half-channel height is 395, and the polymeric stresses due to the polymer additives are evaluated using the FENE-P (finitely extensible nonlinear elastic-Peterlin) model. The numerical results show that the drag reduction rate is significantly affected by the parameters used in the FENE-P model, such as the maximum extensibility and relaxation time of the polymer molecules. The turbulence data for both low- and high-drag reduction regimes are analyzed. In addition, the effects of FENE-P model parameters on the flow characteristics have been investigated for the same drag reduction rate due to the polymer additives. Finally, the present DNS results have been used to verify the correlation between rheological parameters and the extent of drag reduction, which was suggested by Li et al. (2006).

Neural network model for turbulent jet (난류 제트 신경망 모델)

  • Choi, Seongeun;Hwang, Jin Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.247-247
    • /
    • 2022
  • 제트류는 복잡한 흐름 중 하나로 다양한 크기의 에디가 다양한 운동량을 가지고 있다. 이러한 제트류를 구현하기 위해서는 난류 운동 에너지 등 제트류의 특성을 잘 반영하여야 한다. 제트를 구현하기 위해서는 수리학적 모델, 현장 실험 등 많은 방법이 있으며, 본 연구에서는 상대적으로 공간, 시간적 비용이 적게 드는 수치해석 방법을 사용하여 연구를 진행하였다. 대표적인 수치해석방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있다. RANS는 시간 평균 흐름 특성만 산출하며 제트의 복잡성을 재현하는 데 한계가 있어, 본 연구는 DNS와 LES 모델을 이용하여 제트류를 구현하는 것에 초점을 맞추었다. DNS는 해당 격자에서 발생하는 모든 에디를 직접 해석 때문에 난류 모델링이 필요하지 않지만, 많은 수의 그리드가 필요하여 수치해석 시 소요시간이 긴 편이다. LES는 대규모 에디는 직접 해석하지만 일정 크기 이하의 소용돌이를 해석하기 위해서 모델이 필요하다. 따라서 서브 그리드 모델에 따라 약간 다른 결과를 보인다. 이러한 문제점을 해결하기 위해 본 연구에서는 LES의 기존 서브 그리드 모델을 사용하지 않고 신경망 모델로 학습한 DNS 결과를 활용하는 방법을 제안한다. 우선 DNS와 LES 모델을 사용하여 에너지 스펙트럼을 비교하여 서브 그리드 모델이 시작하는 파수를 찾는다. 이후 특정 파수 아래의 작은 에디를 모사할 적절한 신경망 모델을 결정하여 DNS의 작은 에디를 신경망 알고리즘이 모사할 수 있도록 학습시킨다. 이후 기존 서브 그리드 모델을 사용하지 않고 학습된 신경망 알고리즘을 사용한 LES 모델이 모사한 제트류와 실제 DNS 모델을 사용한 제트류를 비교 및 평가한다.

  • PDF

Direct Numerical Simulation of Composite laminates Under low velocity Impact (저속충격을 받는 적층복합재료 평판의 직접 수치모사)

  • Ji, Kuk-Hyun;Kim, Seung-Jo
    • Composites Research
    • /
    • v.19 no.1
    • /
    • pp.1-8
    • /
    • 2006
  • Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. But it is well known that the conventional approach based on the homogenization has the limit in description of damage. The work reported here is an effort in getting better predictions of dynamic behavior and damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials are investigated and compared with the results of the homogenized model which has been used in the conventional approach to impact analysis. Also the multiscale model based on DNS concept is developed in order to enhance the effectiveness of impact analysis, and we present the results of multiscale analysis considering micro and macro structures simultaneously.

Cavitation Noise Prediction: Direct numerical simulation and Modeling (직접 수치 모사를 통한 캐비테이션 소음 예측 및 모델링)

  • Seo, Jung-Hee;Moon, Young-J.
    • Proceedings of the KSME Conference
    • /
    • 2007.05b
    • /
    • pp.2929-2934
    • /
    • 2007
  • Prediction methods for cavitation noise are presented. At first, direct numerical simulation of cavitating flow noise has been performed, and acoustic analogy equation based on the cavitation noise modeling is derived. For the direct numerical simulation, a density based homogenous equilibrium model is employed to simulate cavitating two-phase flow and the governing equations are solved with high-order numerical schemes to resolve cavitation noise. The compressible Navier-Stokes equations for mixture fluids are discretized with a sixth-order central compact scheme, and the steep gradient of flow variables and supersonic regions are treated with the selective spatial filtering technique. The direct simulation of cavitating flow noise is performed for a 2D circular cylinder at cavitation number 0.7 and 1. The far-field noise is also predicted with the derived analogy equation. Noise spectrum predicted with the equation is well compared with the result of direct numerical simulation and also agree well with the theory.

  • PDF