• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.245-250
• /
• 2010

The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.

• Journal of ILASS-Korea
• /
• v.5 no.4
• /
• pp.57-65
• /
• 2000

For this research an extension of the LIF technique that the LIEF(Laser Induced Exciplex Fluorescence) technique has been used LIEF technique is the unique method to allows the visualization of fuel vapor phase and liquid phase individually by capturing each signals of them. In this work performed that the basic procedure for advanced LIEF technique using TEA and benzene as dopants md high power KrF excimer laser to excite the dopants. Iso-octane is used as the fuel because it does not absorb light at the laser wavelength. The boiling point of benzene and TEA are $81^{\circ}C\;and89^{\circ}C$, respectively, in comparison to $99^{\circ}C$ for iso-octane. It is observed that the behavior and distribution of high pressed fuel injection from various test condition. The injection pressure is set as 3MPa. and 5MPa. And the ambient pressure of test chamber is atmospheric pressure and 1MPa, the ambient temperature of chamber is room temperature, $300^{\circ}C\;and\;500^{\circ}C$ to imitate the condition of GDI engine cylinder.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.89-98
• /
• 2009

This study determines the stream mean slope, stream slope and longitudinal stream profile based on the concept of informational entropy. Maximizing the entropy will make the probability distribution of longitudinal stream profile as uniform as possible while satisfying the constraints. Using this relationships the mean stream slope, stream slope and longitudinal stream profile formulas were derived. The parameters of the applied streams were estimated by the least square method using the geomorphological factors of Dalchon stream basin obtained from Chungcheong Buk-Do local stream consolidation scheme drawings. The comparative investigation was performed between the observed and simulated mean stream slope and longitudinal stream profile, and are in good agreement with the measured data. It is noted that this results can be used in the estimation of stream mean slope and longitudinal stream profile.

• Journal of Korea Water Resources Association
• /
• v.38 no.6 s.155
• /
• pp.429-438
• /
• 2005

In this study, a couple of ordinary differential equations which can describe random waves are derived from the Boussinesq equations. Incident random waves are generated by using the TMA(TEXEL storm, MARSEN, ARSLOE) shallow-water spectrum. The governing equations are integrated with the 4-th order Runge-Kutta method. By using newly derived wave equations, nonlinear energy interaction of propagating waves in constant depth is studied. The characteristics of random waves propagate over a sinusoidally varying topography lying on a sloping beach are also investigated numerically. Transmission and reflection of random waves are considerably affected by nonlinearity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1084-1094
• /
• 1993

An efficient method for determining forced responses of a general linear structural system in time domain using subtructure modes and Lagrange multipliers is presented. Compared with the conventional mode synthesis methods, the suggested method does not construct the equations of motion of the combined whole structure and thus the modal parameters of the whole structure are not required. Only modal parameters of each substructure and geometric compatibility conditions are needed. Both the loaded interface free-free modes and free interface modes can be employed as the modal bases of each substructure. Recurrence discrete-time state equations based upon state transition matrix are formulated for the transient analysis of a parameter-changing system. It is shown form numerical examples that the suggested method is very accurate and efficient to calculate transient responses compares with the direct numerical integration method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.173-182
• /
• 1993

This paper presents an algorithm to derive the representative unit hydrograph for the real environment of a watershed. For a given watershed, the conventional methods give several different unit hydrographs by storm events. In this study the LP model is somewhat modified based on the previous study by Mays et also as follows: the objective function is designed to minimize the sum of weighted residuals. An additional constraint of moving average is added to prevent the unit hydrograph from the occurence of oscillation which was not active in Mays's paper. Configuration of rainfall matrix was improved to reduce its dimension in accordance with Diskin's review point. In spite of the superiority of LP approach in terms of representativeness, all the methods were very sensitive to the validity of baseflow separation and rainfall-loss. Several methods of the separations for rainfall excesses and direct runoffs were applied and no preferred methods were identified. This is the matter of judgement considering catchment and rainfall characteristics. This algorithm was applied to a real watershed of the Wi stream in the Nak-dong river. Compared with the IHP results by conventional methods, this optimized representative unit hydrograph demonstrated relatively smaller and shorter values in terms of the peak discharge and the basin lag respectively, and the oscillation of its falling limb successfully eliminated owing to the additional constraints of moving averages.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.71-71
• /
• 2023

사람 장내세균은 그 개체가 100조 이상으로 알려져 있으며, 그 종류도 수 천 종에 이르러 건강에 지대한 영향을 미치고 있다. 이에 많은 연구를 통해 장내세균의 구성과 각종 질환과의 연관성이 밝혀지고 있으며, 장내세균 구성을 변화시켜 질환을 치료하려는 시도도 이어지고 있다. 본 연구에서는 천연식의약소재의 활성 검토를 위해 피부염 동물모델을 구축하고, 장내세균과의 상관관계를 정립하기 위해 실험을 수행하였다. 실험동물의 등 부위를 제모하고 DNFB로 피부염을 유발시켰으며, 유도 전에 대변을 채취하였다. 피부염의 유발을 확인하기 위해 비장의 무게를 측정하였다. Arctigenin과 dexamethasone을 실험군으로 설정하여 동물에 투여하여 그 효과를 검증함과 동시에 대변을 채취하여 장내세균의 구성을 T-RFLP법으로 분석하였다. 또한, 실험동물의 장내세균을 납품회사 별로 분석하여 향후 연구에 활용하고자 하였다. 그 결과, 장내세균의 구성이 피부염의 유발에 직접적으로 영향을 주는 것이 확인되지 않았다. 하지만, 투여 성분의 채내 동태 등에 대한 연구를 실시하여 약물대사를 포함한 장내세균과의 상호작용 연구를 통해 질환과 약물, 그리고 장내세균과의 관계를 정립할 수 있는 기반을 마련하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.137-146
• /
• 2004

Laser Induced Breakdown Spectroscopy(LIBS) system is being developed as an in-situ analysis system for the radioactive waste glass in the cold crucible melter. In order to complete the LIBS system, a spectrometer, a detector, and a laser were structured. An ESA 3000 (LLA Instruments GmbH, Germany) including a calibrated Kodak KAF-1001 CCD detector was selected as the spectrometer. A Q-switched Nd-YAG Brilliant(Quantel, France) laser was selected as an energy source. As the first research stage, the excitation temperatures of Fe(I) as a function of the detector's delay intervals(500, 1000, 1500, 2000ns) were evaluated using the Einstein-Boltzmann equation. The optimized excitation temperature of Fe (I) was 7820k at the delay time of 1500㎱ using the 532nm Nd-YAG laser pulse. This LIBS system will be optimized under the real environment vitrification facility in the near future and then used to be in-situ analyzed the glass compositions in the melter qualitatively.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.101-111
• /
• 2006

This paper proposes a method for modeling new fault ground motion due to moderate size earthquakes in Stable Continental Regions (SCRs) for the first time. The near fault ground motion is characterized by a single long period velocity pulse of large amplitude. In order to model the velocity pulse, its period and peak amplitude need be determined in terms of earthquake magnitude and distance from the causative fault. Because there have been observed very few new fault ground motions, it is difficult to derive the model directly from the recorded data in SCRs. Instead an indirect approach is adopted in this work. The two parameters, the period and peak amplitude of the velocity pulse, are known to be functions of the rise time and the slip velocity. For Western United States (WUS) that belongs active tectonic regions, there art empirical formulas for these functions. The relations of rise time and slip velocity on the magnitude in SCRs are derived by comparing related data between Western United States and Central-Eastern United States that belongs to SCRs. From these relations, the functions of these pulse parameters for NFGM in SCRs can be expressed in terms of earthquake magnitude and distance. A time history of near fault ground motion of moderate magnitude earthquake in stable continental regions is synthesized by superposing the velocity pulse on the for field ground motion that is generated by stochastic method. As an demonstrative application, the response of a single degree of freedom elasto-plastic system is studied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.141-144
• /
• 2008

Deflection in terms of serviceability of reinforced concrete structures is considered as one of significant factor. Domestic concrete specification offers a procedure to evaluate deflection using effective moment of inertia at cracked section, which has been known as Branson's equation in ACI. Branson's equation was derived from statistical analysis of maximum deflection of flexural members, but is somewhat weak in no reflection of bond characteristics between reinforced bars and concrete, such as tension stiffening effect. Therefore, present code creates difference from actual deflection. In this study, experiments about deflection of RC beams was completed to compare domestic standard and Eurocode 2, which calculates deflection considering tension stiffening effect. Four RC beams were built and tested, and initial modulus of elasticity and tensile strength of concrete used in the test was calculated by each design standard.