• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.127-135
• /
• 1994

We investigated the bonding interfaces of directly-bonded Si-Si and $Si-Sio_{2}$/Si wafer pairs. By the angle lapping-delineation, anisotropic etching, and (FIR)-TEM observation methods, we studied on the interface defects and the transient region originated from the interface stress, the various types of voids, the formation and stability of interfacial oxide. We also compared the interface image of the bonded $Si-Sio_{2}$ with that of a typically grown $Si-Sio_{2}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.41-41
• /
• 2021

최근 전 세계적으로 급증하는 기후변화의 영향으로 이상기후로 인한 자연재해들의 강도 및 발생 빈도의 증가가 다양한 연구를 통하여 확인되고 있으며, 이를 대비 및 대응하기 위한 방안수립 연구가 세계의 가장 중요한 주제로 부상되고 있다. 우리나라의 경우에는 기후변화에 따른 심각성 문제가 대두되고 있지만 국가적 대응기반조성 및 수자원정책 의사결정에 직접적으로 활용될 수 있는 일관성 있고 통합적인 기후 정보가 부족한 실정이다. 미래 기상 변동성을 나타내는 기후모델은 전 지구적 대규모 기상장(large scale climate pattern)을 비교적 정확하게 묘사하는 것으로 알려져 있으나 모형에 내재해 있는 시·공간적 편의(spatial-temporal bias) 및 불확실성으로 인하여 통계학적 상세화가 필수적으로 요구된다. 이러한 편향성은 일반적으로 지상 관측 자료를 격자에 보간하여 보정하는 방법이 적용되고 있지만, 관측자료의 불연속성 및 관측소의 불균등성으로 인하여 공간적 신뢰성이 낮다. 이에, 본 연구에서는 Bayesian 기반의 Kriging을 통한 공간적 편의보정 및 QDM(quantile delta mapping)을 연계한 새로운 격자 기반의 통계적 상세화 모형 Bayesian Kriging-QDM을 개발하였다. 본 연구를 통하여 산정된 결과는 과거자료에 근거하여 이루어지는 기존의 보수적인 수자원 관리 체계의 위험성을 저감 시킬 수 있는 의사결정에 직접적으로 활용될 수 있는 기초 자료로 이용 가능할 것으로 판단된다.

• Animal Systematics, Evolution and Diversity
• /
• no.nspc2
• /
• pp.43-65
• /
• 1988

41 species of Korean freshwater Cladocera have been recorded up to now, but very few taxonomic works on this animal group have been carried out . As there is shortage the references useful to identifiy the Korean materials, the present key is made to fill it up. This key comprises 53 Korean species, of which 42 including 11 new records in Korea have been collected from Korean from 1978 to 1986. 42 species, except 11 species that could not be examined by the author , are all figured on the basis of their morphological characters.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.171-181
• /
• 2004

This study was conducted to explore the tensile strength models in granular soil at the full range of unsaturated state. Direct tension experiments were carried out with a newly developed direct tension technique. The measured experimental data were compared with theoretical models developed by Rumpf and Schubert for monosized ideal particulate solids at the unsaturated state. To do this, the soil-water characteristic curve obtained from a suction-saturation experiment was used to define the unsaturation state and the negative pore water pressure with different water content levels, which are important factors in theoretical tensile strength models. The nonlinear behavior of the tensile strength for unsaturated granular soil at the pendular state is appropriately simulated with Rumpf's model. For the funicular and capillary states, the predicted trend by Schubert's model is properly matched with the experimental data: tensile strength steadily increases and reaches a maximum value and then decreases until it reaches zero. This comparison supports the concept that the tensile strength of unsaturated real granular soil can be approximately simulated with theoretical models.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.617-625
• /
• 2013

Along with and <1Q84> Murakami Haruki sees through human nature that fades away with time in his latest work with 'color and memory'. This is the type of character or story to read with the deployment of instrument. Costume of characters conceived in the expansion of the body, the inner expression of personal notes. To others what you want to look, how they formed on the body, with a range of social, if you are claiming a statement. To form the body by forming self-practice is that there becomes. This paper the inside of the characters and the apparent strong interest in the set, costume characters, especially characters were recognized as representing the device of novel. Work directly in the results, or is described as a symbolic system of the body and clothing that embodies the meaning of the symbol you want to the structure of the exchange.

• Food Science and Industry
• /
• v.52 no.1
• /
• pp.40-51
• /
• 2019

For better understanding the relationship between consumers' perception and sensory characteristics of products, diverse types of rapid sensory profiling technique have been suggested as alternatives to conventional descriptive analysis. Among these, check-all-that-apply (CATA) method has gained popularity for studying consumers' perception and intuitive responses to products due to their simplicity, speed, and ease of use. CATA method has been used to gather consumers' perception derived from sensory characteristics of products as well as consumers' emotion responses to products in recent years. Moreover, many researchers reported that CATA method can be used to provide valuable information for product optimization by applying a penalty analysis and collecting responses to ideal product. Thus, this article reviews recent research using CATA in the field of sensory and consumer science and introduces practical applications to achieve various business objectives in food industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.53-62
• /
• 2008

A constitutive model, which can simulate the effect of principal stress rotation associated with direct simple shear test, is proposed in this study. The model is based on two mobilized planes. The plastic strains occur from the two mobilized planes, and depend on stress state, and they are added. The first plane is a plane of maximum shear stress, which rotates about the horizontal axis, and the second plane is a horizontal plane which is spatially fixed. The second plane is used to consider the effect of principal stress rotation on simple shear tests under different stress states. The soil skeleton behavior observed in drained simple shear tests is captured in the model. This constitutive model is incorporated into the dynamic coupled stress-flow finite difference program FLAC. The model is first calibrated with drained simple shear tests on loose Fraser River sand. The measured shear stress and volume change are partially induced by principal stress rotation and compared with model calculations. The model is verified by comparing predicted and measured settlements due to rigid footing resting on loose sands. Settlements predicted by the proposed model were very similar to measured settlements. Mohr-Coulomb model can not consider the effect of principal stress rotation and its prediction was only 20% of measured settlements.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.3
• /
• pp.41-54
• /
• 2015

시간-면적 기법을 이용해 유역의 수문과정을 묘사하는 분산형 (distributed) 연속 (continuous) 강우유출모형인 HYSTAR의 거동특성과 주요 매개변수에 대한 민감도를 분석하였다. 유역의 수문조건에 따른 모형거동의 변화를 분석하기 위해 연속되는 4개의 개별 강우사상에 대한 민감도를 조사하고 비교하였다. 또한, 매개변수의 상호작용이 민감도 분석결과에 미치는 영향을 파악하기 위해 두 가지 서로 다른 기법 (one-factor-at-a-time 과 all-factor-at-a-time 방법)을 이용하여 산정된 민감도를 비교하였다. 분석결과, 모형의 직접유출량, 첨두유량 및 도달시간 모의결과는 유출곡선번호 (curve number)에 가장 민감하게 반응하는 것으로 나타났으며, 토양의 깊이, van Genuchten 식의 매개변수, 작물계수에 큰 영향을 받았다. 한편, 모의된 기저유출량은 토양의 깊이를 비롯하여 van Genuchten 식의 매개변수, 작물계수 (crop coefficient), 이방성계수 (anisotropic coefficient), 유출곡선번호의 변화에 민감하였다. 매개변수에 대한 민감도는 분석에 이용된 강우사상에 따라 다르게 나타났으며, 유역의 토양수분조건에 따라 다르게 거동하는 모형의 중요한 특성을 잘 반영하였다. 두 가지 서로 다른 기법을 이용한 민감도 분석결과는 모의된 직접유출량 및 기저유출량의 변화가 매개변수의 상호작용에 의해 제한될 수 있음을 보여 주었다. 본 연구는 HYSTAR 모형의 매개변수에 대한 민감도 분석을 통해서 해당 모형의 거동을 정량적으로 보여주었고, 이를 통해 모형의 건전성 (soundness)을 입증할 수 있는 하나의 근거를 제시하였다. 본 연구결과는 향후 HYSTAR 모형을 이용한 수문분석 시 보정을 위한 매개변수 선정에 활용될 수 있을 것으로 사료된다. 또한, 본 연구결과에서 나타난 민감도의 수문조건 (또는 선정된 강우사상)에 대한 의존성은 연속유출 모형의 민감도 분석을 위한 강우 사상 선정 및 민감도 분석결과의 해석에 유용한 정보를 제공할 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.165-173
• /
• 2005

This paper presents the results for deposition of micrometer-scale metal lines on glass for the development of TFT-LCD circuit repair-system. Although there had been a few studies in the late 1980's for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and W(CO)s was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 m depending on laser power and scan speed while the width was controlled between 50um using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below $1{\Omega}{\cdotu}um$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.