• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.10a
• /
• pp.26-30
• /
• 1998

공장자동화 분야의 응용프로그램은 일반적으로 구동부(Control Part)와 GUI(Graphical User Interface)부로 구성된다. 구동부와 GUI부 사이에는 해당 프로그램이 작동되는 컴퓨터 시스템들이 있으며 이들 시스템 시기에는 적절한 프로토콜에 따른 자료교환이 발생한다. 통신기법 중 자동화 시스템에서 사용되는 RS232C는 직렬 통신기법으로서 자료 손실로 인하여 전체 시스템의 안정성 및 효율성이 저할 될 수 있다. 본 논문에서는 이러한 자료손실을 줄일 수 있는 통신 프로그램을 구현함으로써 공장자동화의 안정 성 및 효율성을 증대시킬 수 있는 방법을 제시하고자 한다. 사용된 방법은 자료손실을 막기 위하여 자료 수신부와 자료 처리부를 분리하고 수신 측은 메시지 인터럽트 방식을 사용하고 자료 처리부는 타이머 방식을 적용시켰다. 또한, 자료 순환 대기행렬을 구성하여 타이머가 주기적으로 자료를 검색하여 처리하게 함으로써 처리시간을 고려하지 않아도 자료손실을 막을 수 있도록 하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.31-32
• /
• 2010

본 논문에서는 에너지 순환을 위해 회생제동을 할 수 있는 전기자동차용 고효율 승압형 양방향 DC/DC 컨버터를 제안한다. 제안된 컨버터는 1차 측 Full-Bridge 회로와 고조파 변압기 부, 2차 측 배압회로를 구성하고 변압기에 존재하는 누설인덕턴스 성분과 배압회로의 커패시터 성분을 이용하여 직렬 L-C공진회로를 구성함으로서 모든 스위치에 ZCS (Zero Current Switching) 을 구현함으로서 전체 사이즈 및 비용을 감소시키고자 하였다. 제안된 방식의 타당성을 입증하기 위하여 PSIM 시뮬레이션으로 본 논문의 컨버터 구조의 타당성을 검증하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.259-261
• /
• 2007

논문은 동해화력발전처의 이차공기송풍기를 가변 회전수 제어하여 소내 소비 전력을 절감하고 전동기의 직입기동에 의한 스트레스를 줄이기 위하여 실증 적용된 동해화력발전처 이차 공기 송풍기 구동용 H-브릿지 멀티레벨 인버터에 관한 것이다. H-브릿지 멀티레벨 인버터는 독립적으로 절연된 직류 부를 갖는 저압의 단상 인버터(셀 인버터)를 다수 직렬 접속하여 고압 3상 전압을 출력하는 Cascaded H-브릿지 전압형 인버터이다. 본 논문에서는 동해화력발전처에 실증 적용된 6.6kV, 1MVA급 인버터의 계통 병입 후 부하 변동 시험을 통하여 신뢰성을 입증하였다.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.896-900
• /
• 2018

Traditionally, Linear Shift Feedback Register (LFSR) has been widely employed to implement Cyclic Redundant Check (CRC) codes for a serial input. Since many applications including network and storage systems demand as high throughput as ever, various efforts have been made to implement CRC hardware to support parallel inputs. Among various parallel schemes, the look-ahead scheme is one of the most widely used schemes due to its short critical path. However, it is very cumbersome to design HDL codes for parallel CRC codes since the look-ahead scheme is inevitable to consider how register and input values move in the next cycles. Thus, this paper proposes a novel CRC hardware generator, which automatically produces HDL codes given a CRC polynomial and parallel factor. The experimental results verify the applicability to use the proposed generator by analyzing the synthesis results from the generated HDL code.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.424-431
• /
• 2007

This thesis proposed H-Bridge Multi-Level Inverter for Fluidized Bed Combustion Boiler Secondary Air Fan in 200MW thermal power plant. The adjustable speed drive systems improve the efficiency in lightly load condition and extend the life span of motor by limiting the over current at starting. H-Bridge Multi-level Inverter is composed of the several series low voltage power cell inverters, which have the independent isolated do link, in each phase. KEPRI(Korea Electric Power Research Institute) has successfully completed to develop, install, and commission H-Bridge Multi-level Inverter(6.6kV, 1MVA). This thesis gives a full detail about H-Bridge Multi-level Inverter, proposed boiler DCS(Distributed Control System) logic, and commissioning test result.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.37-43
• /
• 1996

The electrochemical impedance spectra of polyaniline film coated on tungsten electrodes by cyclic voltammetry have been measured in 0.1 M aqueous sulfuric acid solution. An electrochemical cell composed of large redox capacitance and low resistance of PANI-film in series was in agreement with the conductive behavior reported at these potentials. When the PANI was coated on bare tungsten, the electrolytic resistance was only observed. However, on the oxidized tungsten instead of bare tungsten, the resistance of tungsten oxide and the contact resistance between PANI and tungsten oxide were additionally observed. Equivalent electrical circuits have been deduced from the impedance data. It was therfore possible to obtain the parameters of the ionic mass transport within the film.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.353-364
• /
• 1998

This paper presents a systematic approach to the modeling of power electronic circuits with systemlongrightarrowlevel simulation l languages. It is shown that a circuit model reduces to one of four basic types according to input/output conditions. The e elementary models for single series components and shunt components are derived which are integrated to develop a m model of given converter circuit. The constraints imposed on the model development-matching input/output conditions a and avoiding algebraic loop-are discussed in relation to the realization example of a buck converter circuit model. It is s shown that the constraints can always be fullfilled by introducing fictitious interface blocks, which is generalized to the c concept of model transformation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.585-592
• /
• 2014

It is well known that serial belief propagation (BP) decoding for low-density parity-check (LDPC) codes achieves faster convergence without any increase of decoding complexity per iteration and bit error rate (BER) performance loss than standard parallel BP (PBP) decoding. Serial BP (SBP) decoding, such as horizontal SBP (H-SBP) decoding or vertical SBP (V-SBP) decoding, updates check nodes or variable nodes faster than standard PBP decoding within a single iteration. In this paper, we propose combined horizontal-vertical SBP (CHV-SBP) decoding. By the same reasoning, CHV-SBP decoding updates check nodes or variable nodes faster than SBP decoding within a serialized step in an iteration. CHV-SBP decoding achieves faster convergence than H-SBP or V-SBP decoding. We compare these decoding schemes in details. We also show in simulations that the convergence rate, in iterations, for CHV-SBP decoding is about $\frac{1}{6}$ of that for standard PBP decoding, while the convergence rate for SBP decoding is about $\frac{1}{2}$ of that for standard PBP decoding. In simulations, we use recently proposed generalized LDPC (GLDPC) codes with binary cyclic codes (BCC).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2013

Poly(ether imide) (PEI)-poly(dimethylsioxane) (PDMS) composite membranes and their modules were prepared, which are capable of selective $CO_2$ separation from the mixture gas. The gas flow rate, concentration, recovery ratio of $H_2$ and removal ratio of $CO_2$ outflowing by stage-cut were characterized at $25^{\circ}C$ and the constant pressure. In addition, to increase the recovery ratio of $H_2$, one stage, two stage series connection, and three stages series + parallel connection tests were carried out. When the stage-cut was 0.32 for the three stages connection operation, the concentration $H_2$ of the produced gas and the recovery ratio of $H_2$ was 97% and 85%, respectively. And also the removal ratio of $CO_2$ was 90% was obtained and the recycled gas concentration was similar with that of the feed gases.