• Composites Research
• /
• 제12권4호
• /
• pp.1-7
• /
• 1999

Fatigue life prediction of matrix dominated composite laminates, which have a nonlinear stress/strain response, was studied analytically and experimentally. A stress function describing the relation of initial fatigue modulus and elastic modulus was used in order to consider the material nonlinearty. New modified fatigue life prediction equation was suggested based on the fatigue modulus and reference modulus concept as a function of applied stress. The prediction was verified by torsional fatigue test using crossply carbon/epoxy laminate tubes. It was shown that the proposed equation has wide applicability and good agreement with experimental data.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.22-27
• /
• 1999

고급복합재료(advanced composite material)는 여러 가지 훌륭한 장점에도 불구하고 건설기술자에게는 그 이론이 너무 복잡하여 건설구조에 대한 응용이 지연되고 있다. [$\alpha/\beta/\beta/\gamma/\alpha/\alpha/\beta$]r, $\alpha$=-$\beta$, $\gamma$=0$^{\circ}$ 또는 90$^{\circ}$ 와 같은 몇 가지 배향각을 갖은 적층판은, r이 증가함에 따라, $B_{i,j}$강성이 0으로 접근한다(1995). 건설구조물은 그 치수가 커서 r이 증가해도 지간 대 두께비가 충분히 커서, 횡방향 변형율(${\varepsilon}_{xz}$,${\varepsilon}_{yz}$)의 영향이 무시될 수 있다. 이 경우 판의 지배방정식은 간단한 특별직교이방성판의 식으로 변화된다. 김덕현은 토목구조물에 흔히 적용될 수 있는 이러한 배향각을 가진 적층판의 지배방정식을 취급이 간단한 특별직교 이방성 판의 경우로 변경시킨 다음 해석을 더 간단히 진행할 수 있도록 기술자들이 유사 등방성 상수(quasi-isotropic constant)를 사용하여 낮익은 등방성판의 방정식을 사용하여 답을 구한 다음 그가 개발한 "수정계수(correction factor)"를 사용하여 "정확한"해를 구하는 방법을 발표한바 있다(1991).는 방법을 발표한바 있다(1991).

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.111-117
• /
• 1999

섬유강화 복합재료의 섬유와 수지까지 세부적으로 모델링이 가능한 Direct Numerical Simulation을 통해서 Boron/Aluminum 섬유강화 복합재료의 탄성계수들을 구해 보았다. 수치실험에서는 복합재료를 직교이방성 물질로 가정하였고, 특정 체적에 대한 평균치를 이용해서 물성치를 구하였으며, 혼합법칙에 의해서 구한 값 및 대표체적요소(Representative Volume Element)를 사용해서 구한 값들과 비교하였다. 혼합법칙의 경우, 섬유방향 인장계수(E₁)을 제외한 나머지 물성치들에 대해서는 상당한 차이를 나타내며, 이는 혼합법칙 유도과정에서 가정한 기본가정들이 적절하지 않기 때문이라는 것을 수치실험(Numerical Experiment)을 통해 알 수 있었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.107-110
• /
• 2003

본 연구에서는 3차원 브레이딩 기계를 이용하여 제작된 6 layer의 3차원 원형 형태로 브레이드된 유리 섬유 강화 복합재료의 프리프레그를 이용하여 에폭시 수지를 모체로 하는 RTM(Resin Transfer Molding) 공정을 통해 직교 이방성 복합재료를 제작하였다. 또한 탄성한계 내에서의 구성방정식을 얻기 위해 unit cell 모델링을 통해 복합재료의 기하를 모사하고 method of cells 이론과 homogenization technique를 이용하여 복합재료의 구성방정식을 나타내는 수치해석 코드를 개발하였다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.345-346
• /
• 2007

• Journal of the korean Society of Automotive Engineers
• /
• 제12권2호
• /
• pp.51-58
• /
• 1990

According to the developments of various composite materials, it seems to be very important to evaluate the strength and fracture behavior of composite materials. When the composite material is considered as orthotropic material, the characteristic equation of orthotropic material have complex roots. If characteristic roots are equal, the fundamental solutions of BEM become singular ones. This paper analyse the fundamental solutions of the singular problem of orthotropic material using the analogous method to isotropic material.

• Geotechnical Engineering
• /
• 제4권3호
• /
• pp.35-42
• /
• 1988

A series of consolidated-undrained cubical triaxial tests was performed to investigate the three- dimensional strength characteristics of anisotropic overconsolidated clay. All specimens sampled in field were loaded under conditions of principal stress directions fixed and aligned with the directions during sampling. A sufficient number of tests It was performed to deter.mine the three- dimensional failure surface in the octahedral plane. The adjusted effective friction angles obtained by the stress state projected on the same octahedral plane did not show anisotropy, while the measured effective friction angles showed considerally difference according to the axes of speccimens. Therefore, Lade failure criterion proposed fort isotropic materials could be also used practically for anisotropic overconsolidated clay. The direction of the plastic strain increment wrectors superimposed on the principal stress space was nearly perpendicular to the traces of the failure surface in the octahedral plane.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제14권1호
• /
• pp.23-36
• /
• 1990

The various composite materials have been developed with the development of high strength material and the increasement of composite material usage. Therefore many researchers have studied about the stress analysis and the fracture mechanics for composite materials through the experiment or the theory. Among the experimental methods, the photoelastic experiments have been used for the stress analysis of the isotropic structures or the anisotropic structures. To analyze the stresses in the orthotropic material with photoelastic experiment, the basic physical properties ( $E_{L}$, $E_{T}$, $G_{LT}$ , .nu.$_{LT}$ ) and the basic stress fringe values ( $f_{L}$, $f_{T}$, $f_{LT}$ )are needed, therefore the relationships between the basic physical properties and the stress fringe values were derived in this paper. When the stress fringe value is very large, it was assured by the experiment that the relationships are established both in the room temperature and in the high temperature (T = 130.deg. C). Therefore the basic physical properties can be obtained from the relationships by measuring stress fringe values instead of measuring the basic physical properties.rties.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제25권4호
• /
• pp.293-300
• /
• 2012

In this study, the delamination analysis has been implemented to investigate the initiation and propagation of crack in composite laminates composed of orthotropic materials. A simple modeling was achieved by moving nodal technique without re-meshing work when crack propagation occurred. This paper aims at achieving two specific objectives. The first is to suggest a very simple modeling scheme compared with those applied to conventional h-FEM based models. To verify the performance of the proposed model, analysis of double cantilever beams with composite materials was implemented and then the results were compared with reference values in literatures. The second one is to investigate the behavior of interior delamination problems using the proposed model. To complete these objectives, the full-discrete-layer model based on Lobatto shape functions was considered and energy release rates were calculated using three-dimensional VCCT(virtual crack closure technique) based on linear elastic fracture mechanics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제31권2호
• /
• pp.105-114
• /
• 2018

In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.