• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.537-549
• /
• 1998

The purpose of this study was to evaluate the influence of root resection and retrograde cavity preparation methods on the apical leakage in endodontic surgery. To investigate the effect of various root resection and retrograde cavity preparation methods on the apical leakage, 71 roots of extracted human maxillary anterior teeth and 44 mesiobuccal roots of extracted human maxillary first molars were used. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. Three millimeters of each root was resected at a 45 degree angle or perpendicular to the long axis of the tooth according to the groups. Retrograde cavities were prepared with ultrasonic instruments or a slow-speed round bur, and occlusal access cavities were filled with zinc oxide eugenol cement. Three coats of clear nail polish were placed on the lateral and coronal surfaces of the specimens except the apical cut one millimeter. All the specimens were immerged in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using two-way ANOVA and Duncans Multiple Range Test. The results were as follows: 1. No statistically significant difference was observed between ultrasonic retrograde cavity preparation method and slow-speed round bur technique, without apical bevel (p>0.05). 2. Ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, with bevel (p<0.0001). 3. No statistically significant difference was found between beveled resected root surface and non-beveled resected root surface, with ultrasonic technique (p>0.05). 4. Non-beveled resected root surface showed significantly less apical leakage than beveled resected root surface, with slow-speed round bur technique (p<0.0001). 5. No statistically significant difference in apical leakage was found between the group of retrograde cavity prepared parallel to the long axis of the tooth and the group of one prepared perpendicular to the long axis of the tooth (p>0.05). 6. Regarding isthmus preparation, ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, in the mesiobuccal root of maxillary molar, without bevel (p<0.0001).

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.310-321
• /
• 2016

This study aims to analyze the impact of elements for evaluating the festival, such as festival content, accessibility and convenience and festival image, on visitor satisfaction and behavioral intention, based on the actual case of Seoul Friendship Fair (SFF) which has been hosted by the City of Seoul every May since 1996. The SFF is participated by 64 embassies operating in Seoul and Seoul's 14 sister & friendship cities. Some 100,000 out of the total 350,000 visitors to the SFF are from overseas. The main elements of this study include survey responses about festival content and population statistics frequency analysis conducted over 277 festival visitors. As for factors, as a result of varimax rotation over main elements, technical statistics, credibility analysis and correlation analysis were done over each element group of five. Hypothesis was validated through regression analysis that the elements for evaluating local festivals have an impact on visitor satisfaction and behavioral intention. The suggestions and results of this study, both theoretical and practical, were presented to help the SFF differentiate itself and thereby become one of Seoul's most representative festivals.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.401-413
• /
• 1988

To investigate the users' activity, impact and psychology in Naejang Temple district at Mt. Naejang National Park in Korea, users' density and questionnaire survey at three major picnic areas and passenger counting at major pass were executed and environmental impacton on the site was surveyed. The total number of visitors showed stability at the level of one million persons every year after 1984. Users' impact was much severe along the main trail, the upper cablecar station and the slope from the observatory to Keumsun Valley, The maximum momentary number of users was estimated as 53,000 persons in autumn. Approximately 20% of the total number of visitor used Keumsun Valley and Weonjeok Valley area and 80% of visitors left after using only grassland and cablecar. The visitors' characteristics was similiar to the type of long-distanced national park and the main visiting purpose was to see autumn leaves. The psychological satisfaction did not very significantly as to increasing user's speace. As a result of varimax rotated factor analysis, the 1st factor, most affecting users' psychological satisfaction, was related to landscape and consisted of nature disturbance, crowdedness, noisiness, cleanness, in order of importance. The 2nd factor was related to facilities and consisted of number of toilet, number of waste-baskets, amount of drinking water, safety, in order of importance.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.75-85
• /
• 2008

The pale chub (Zacco platypus) is a dominant species that migrates locally and inhabits in rivers in Korea. The fish movement at confluences or hydraulic connections is very important especially for the life of small fish as pale chub. If main stream and off-channel habitats are connected with culverts, they would restrict the fish movement due to the high flow velocities and low depths. In foreign conturies, design flow conditions of fish friendly culvert, including flood flow capacity and fish-passage flow capacity, were assigned. Installation of culvert fishways is one way to improve the fish-passing capacity of culverts. On the contrary, in Korea, the design flow of culvert contains only the flood flow capacity. The effect of the fish passage with offset baffles was tested with the fixed velocity method in an experimental flume. As a result, An occasion velocity 1.2m/s, proportional success of pale chubs pass is maximum 20% improve than without baffle flume for energy dissipate. Offset baffle fishway(baffle height 5cm) provides that resting areas and/or a continuous channel of low velocity water in culverts. Especially, short baffle areas are domain where the pale chubs pass. And, FLOW-3D, a three dimentional numerical model, was used in order to evaluate detailed hydraulic characteristics and application possibility in a culvert fishway design.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.233-233
• /
• 2011

This study describes the characteristics of accretion and scour around artificial reefs in Korea. The survey for accretion and scour was made at a dice reef set consisting of 137 dice reefs. The volume of a dice reef unit is 8 $m^3$. The reef set was placed on the muddy sand at 21.6 m in November of 1999. Equipment used in the survey includes Side Scan Sonar, Multi Beam Echo Sounder, Sub-Bottom Profiler and water current meter. According to the results, the artificial reefs are heaped up at two to three times (4 m) the height of the dice reef. The maximum current around the artificial reefs was 81.5 cm/sec at the ebb tide and 72.7 cm/sec at the flood tide. Scour around artificial reefs occurs upstream to the flow while accretion is formed at wake zone in the downstream. The height of accretion ranges from 2.4 to 3.0 m. The crest of the accretion is formed at the distance of about 10 m from the edge of the reef. The slope of accretion is formed steeply at the vicinity of the reef which is at right angles to the direction of main current, and grows gently lower with the increased distance from the reef. Scour is continuously caused by upwelling from the reef set and by side currents that flow parallel to side of the accretion. Also, scour takes place on the deposited sediment rather than on the remaining bottom sediments. This means that, once fully formed, the depth of scour gully on both sides to the direction of main current hardly changes.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.127-136
• /
• 2001

To increase the structural integrity of concrete box culvert good compaction by the dynamic compaction roller with bi9 capacity is as effective as good backfill materials. It is needed for effective compaction that a compaction roller closes to concrete structure with high frequency. However structural distress of the culvert could be occur due to the excessive earth pressure by great dynamic compaction load. To investigate the characteristics of Induced stress by compaction, a box culvert was constructed with changing cushion materials and compaction methods. Two types of cushion material such as tire rubber chip and EPS(Expanded Polystyrene) were used as cushion panels and they are set on the culverts before backfill construction. Laboratory test result of cushion material says that the value of dynamic elastic modulus of rubber is lesser than that of EPS. On the other hand, material damping of rubber material is greater than that of EPS. In most case, dynamic compaction rollers with 10.5 ton weights were used and vibration frequency was applied 30Hz for the great compaction energy. This paper presents the main results on the characteristics of dynamic earth pressures during compaction. The amounts of induced dynamic pressures$(\Delta\sigma\;h)$ by compaction are affected with construction condition such as compaction frequency, depth of pressure cell, distance between roller and the wall of culvert and roller direction. Based on the measured values dynamic lateral pressure on the culverts, it could be said that orthogonal direction of roller to the length of culvert is more effective to compaction efficiency than parallel direction.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.341-352
• /
• 2011

The purpose of this study was carried out to investigate the effect of electroacupuncture on reactive gliosis expressing GFAP in rat with transient global cerebral ischemia. Subjects were randomly divided into two groups, a control group and a electroacupuncture group on ST36, LI11 and SP9 with 2 Hz and 1 mA. The rats were sacrificed on 1, 3 and 7 days after transient cerebral ischemia using ligation of left common carotid artery. After making brain slide sections, they were immunostained with GFAP antisera(1:2,500). The results were as follows: The numbers of astrocytes of electroacupuncture group were decreased than those of control group at every 1, 2 and 7 days. Especially, the numbers of astrocytes at 3 days(p<0.01) and 8 days(p<0.05) were different statistically. And astrocytes had resting, hypertrophic and moving types on cerebral cortex. The decrease of numbers of astrocytes expressing GFAP showed that electroacupuncture could localise and minimize the brain damage by transient cerebral ischemia and cause brain cell plasticity.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.93-101
• /
• 2008

Bearing strength test was investigated to determine the bearing properties of domestic larix glulam according to the load direction (in parallel to grain and in perpendicular to grain), the fastener (bolt and drift-pin), and the direction of laminae. The specimen was 5 ply glulam. The diameters of fastener are 12, 16 and 20 mm. The results were as follows. 1) In according to the diameter of bolt and drift-pin, the average of maximum bearing strength in parallel to grain loading was similar to that in perpendicular to grain loading. The average of maximum bearing strength was 1.50~2.31 times higher in parallel to grain loading than in perpendicular to grain loading. The average of maximum bearing strength in parallel to grain loading was lowered by 20% with increasing the diameter from 16 mm to 20 mm, but that in perpendicular to grain loading didn't show a clear tendency. 2) The average of bearing stiffness in parallel to grain loading was the highest at 16 mm in diameter. The average of bearing stiffness is similar to the shearing stiffness in drift-pin connection with increasing diameter. 3) In parallel to grain loading, the failure mode of specimens was the splitting along the grain in decreasing diameter. The failure mode in perpendicular to grain loading was the splitting along the grain. In this case, split occured more in specimens using bolt than in those using drift-pin. 4) The 5% offset yield strength in parallel to grain loading was similar to the predicted bearing strength of KBCS, NDS. In perpendicular to grain loading, the NDS's equation can be applied to predict the bearing strength.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.99-105
• /
• 2014

Since traffic accidents account for the highest proportion of the artificial disasters which occur in urban areas along with fire, more scientific an analysis on the causes of traffic accidents and various prevention measures against traffic accidents are needed. In this study, the research selected Jinju-si, which belongs to local small and medium-sized cities as a research target to analyze the characteristics of temporal and spacial distribution of traffic accidents by associating the data of traffic accidents, occurred in 2013 with the causes of traffic accidents and location information that includes occurrence time and seasonal features. It subsequently examines the spatial correlation between traffic accidents and the characteristics of urban space development according to the plans of land using. As a result, the characteristics of accident distribution according to the types of accidents reveal that side right-angle collisions (car versus car) and pedestrian-crossing accident (car versus man) showed the highest clustering in the density analysis and average nearest neighbor analysis. In particular, traffic accidents occurred the most on roads which connect urban central commercial areas, high-density residential areas, and industrial areas. In addition, human damage in damage conditions, clear day in weather condition, dry condition in the road condition, and three-way intersection in the road way showed the highest clustering.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.3-9
• /
• 2015

Since changes in land use in urban space cause traffic volume and it is closely related to traffic accidents. Therefore, an analysis on the causes of traffic accidents is judged to be an essential factor to establish the measure to reduce traffic accidents. In this regard, the analysis was conducted on the clustering by using the nearest neighbor indexes with regard to the occurrence frequencies of commercial and residential zone based on traffic accident data of the past five years (2009-2013) with the target of local small-medium sized city, Jinju-si. The analysis results, obtained in this study, are as follows: the occurrence frequency of traffic accidents was the highest in spring and the lowest in winter respectively. The clustering of traffic accident occurrence at nighttime was stronger than at daytime. In addition, terms of the analysis on the clustering of traffic accident according to land use, changes according to the seasons was not significant in commercial areas, while clustering density in winter tended to become significantly lower in residential areas. The analysis results of traffic accident types showed that the side-right angle collision of cars was the highest in frequency occurrence, and widespread in both commercial areas and residential areas. These results can provide us with important information to identify the occurrence pattern of traffic accidents in the structure of urban space, and it is expected that they will be appropriately utilized to establish measures to reduce traffic accidents.