Browse > Article

Bearing Properties of Domestic Larix Glulam  

Kim, Keon-Ho (Department of Wood Science & Engineering, College of Forest and Environmental Sciences, Kangwon National University)
Hong, Soon-Il (Department of Wood Science & Engineering, College of Forest and Environmental Sciences, Kangwon National University)
Publication Information
Journal of the Korean Wood Science and Technology / v.36, no.4, 2008 , pp. 93-101 More about this Journal
Abstract
Bearing strength test was investigated to determine the bearing properties of domestic larix glulam according to the load direction (in parallel to grain and in perpendicular to grain), the fastener (bolt and drift-pin), and the direction of laminae. The specimen was 5 ply glulam. The diameters of fastener are 12, 16 and 20 mm. The results were as follows. 1) In according to the diameter of bolt and drift-pin, the average of maximum bearing strength in parallel to grain loading was similar to that in perpendicular to grain loading. The average of maximum bearing strength was 1.50~2.31 times higher in parallel to grain loading than in perpendicular to grain loading. The average of maximum bearing strength in parallel to grain loading was lowered by 20% with increasing the diameter from 16 mm to 20 mm, but that in perpendicular to grain loading didn't show a clear tendency. 2) The average of bearing stiffness in parallel to grain loading was the highest at 16 mm in diameter. The average of bearing stiffness is similar to the shearing stiffness in drift-pin connection with increasing diameter. 3) In parallel to grain loading, the failure mode of specimens was the splitting along the grain in decreasing diameter. The failure mode in perpendicular to grain loading was the splitting along the grain. In this case, split occured more in specimens using bolt than in those using drift-pin. 4) The 5% offset yield strength in parallel to grain loading was similar to the predicted bearing strength of KBCS, NDS. In perpendicular to grain loading, the NDS's equation can be applied to predict the bearing strength.
Keywords
Bearing strength; Glulam; bearing stiffness;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Wilkinson T. L. 1991. Dowel bearing strength. Res. Pap. FPL-RP-505 Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Product Laboratory.
2 Rammer, D. R. and S. G. Winistorfer, 2001. Effect of Moisture Content on Dowel-Bearing Strength. Wood and Fiber Science. 33(1): 126-139.
3 Soltis, L. A., S. Karnasudirdja, and J. K. Little, 1987. Angle to grain strength of dowel-type fasteners. Wood and Fiber Science. 19(1): 68-80.
4 Hwang. K. and K. Komatsu. 2002. Bearing properties of engineered wood products I : effects of dowel diameter and loading direction. J wood Sci. 48: 295-301.   DOI   ScienceOn
5 Takuro H. 1984. Effect of loading direction on the bearing characteristics of wood under a bolt. 木材學會誌. 30(12): 959-964.
6 김건호, 홍순일. 2008. 낙엽송집성재의 bolt, drift pin 접합부의 전단강도 성능 평가. 목재공학. 36(1): 69-78.   과학기술학회마을
7 건축구조 설계기준. 2005. 대한건축학회.
8 America Society of Civil Engineer. 1997. National Design and Specification for Timber Construction of U.S. ASCE. New York.
9 Eurocode 5. 1995. Design of timber structures European pre-standard ENV 1995-1-1: general rules and rules for building, CEN, European Committee for Standardization, Brussels.
10 Johansen, K. W. 1949. Theory of timber connections. International Association for Bridge and Structural Engineering. 9: 249-262.
11 Korea Standard Association. 2002. KS F 2156. Method of dowel-bearing strength test for wood and wood-based products.
12 Whale LRS and I. Smith. 1986. The derivation of design values for nailed and bolted joints in EUROCODE 5. Working Commission 18, Timber Struct., Meeting 19. Int. Council for Build. Research Studies and Documentation.
13 Kawamoto N, K. Komatsu and M. Harada. 1993. Lateral strengths of drift-pin in perpendicular to the grain loadings 3:estimation of yield loads by european yield theory (in Japanese). Mokuzai Gakkaishi 39:1386-1392.
14 NFPA 1986. National design specification. National Forest Product Association, 1250 Connecticut Avenue, NW., Washington, DC.
15 Hirai T. 1989. Basic properties of mechanical wood-joints properties of wood under a bolt. Res. bull. The College Experiment Forest, Faculty of Agriculture, Hokkaido University, 46(4):967-988