• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1029-1042
• /
• 2021

As part of the next-generation Compact Advanced Satellite 500 (CAS500) project, CAS500-4 is scheduled to be launched in 2025 focusing on the remote sensing of agriculture and forestry. To obtain quantitative information on vegetation from satellite images, it is necessary to acquire surface reflectance through atmospheric correction. Thus, it is essential to develop an atmospheric correction method suitable for CAS500-4. Since the absorption and scattering characteristics in the atmosphere vary depending on the wavelength, it is needed to analyze the sensitivity of atmospheric correction parameters such as aerosol optical depth (AOD) and water vapor (WV) considering the wavelengths of CAS500-4. In addition, as CAS500-4 has only five channels (blue, green, red, red edge, and near-infrared), making it difficult to directly calculate key parameters for atmospheric correction, external parameter data should be used. Therefore, thisstudy performed a sensitivity analysis of the key parameters (AOD, WV, and O₃) using the simulated images based on Sentinel-2 satellite data, which has similar wavelength specifications to CAS500-4, and examined the possibility of using the products of GEO-KOMPSAT-2A (GK2A) as atmospheric parameters. The sensitivity analysisshowed that AOD wasthe most important parameter with greater sensitivity in visible channels than in the near-infrared region. In particular, since AOD change of 20% causes about a 100% error rate in the blue channel surface reflectance in forests, a highly reliable AOD is needed to obtain accurate surface reflectance. The atmospherically corrected surface reflectance based on the GK2A AOD and WV was compared with the Sentinel-2 L2A reflectance data through the separability index of the known land cover pixels. The result showed that two corrected surface reflectance had similar Seperability index (SI) values, the atmospheric corrected surface reflectance based on the GK2A AOD showed higher SI than the Sentinel-2 L2A reflectance data in short-wavelength channels. Thus, it is judged that the parameters provided by GK2A can be fully utilized for atmospheric correction of the CAS500-4. The research findings will provide a basis for atmospheric correction of the CAS500-4 in the future.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.33-43
• /
• 2008

In this study, for the purpose of evaluating the shear wave velocity in core zone, cross-hole test, down-hole test, MASW (Multi-channel Analysis of Surface Wave), and seismic reflection survey were carried out on the crest of the existing 'Y' dam. The results of field tests were compared one another. Furthermore, the field test results were compared with the result by the Sawada's empirical recommendation method. The purpose of this study is to compare the results of four kinds of field tests for evaluation of shear wave velocity in core zone of existing dam, to verify applicability of the empirical method which was recommended by Sawada and Takahashi, and to recommend a reasonable method for evaluation of shear wave velocity which is needed to evaluate tile maximum shear modulus of core zone. From the results of four kinds of field tests such as cross-hole test, down-hole test, MASW, and seismic reflection survey, it was found that the shear wave velocity distributions were similar within 18 m in depth and the results obtained by MASW and seismic reflection survey were almost the same by 30 m in depth. For evaluation of shear wave velocity in core zone of the existing dam, in consideration that it is not easy to bore the hole ill the core zone of existing dam, surface surveys such as MASW and seismic reflection method are recommended as realistic methods. On condition that it is impossible to conduct the field test and it is preliminary investigation, it is recommended that Sawada's low bound empirical equation be used.

• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.176-182
• /
• 1998

The borehole radar reflection survey can image the underground structure with high resolution, however, we cannot get any information on the orientation of the reflectors with dipole antenna alone. The direction-finding antenna system is commonly used to give the solution to the problem. However, the interpretation of the data from direction- finding antenna may be time-consuming, and sometimes have ambiguities in the sense of precise determination of the azimuth. To solve the problem, we developed the automatic azimuth finding scheme of reflectors in borehole radar reflection data using direction-finding antenna. The algorithm is based on finding the azimuthal angle possibly showing the maximum reflection amplitude in the least-squared error sense. The developed algorithm was applied to the field data acquired in quarry mine. It was possible to locate nearly all of the reflectors in three dimensional fashion, which coincide with the known geological structures and man-made discontinuities.

• Journal of the Korean Geographical Society
• /
• v.44 no.3
• /
• pp.395-409
• /
• 2009

The objective of this paper is to illustrate that kriging can provide an effective framework both for integrating remote sensing data and for uncertainty modeling through a case study of sediment grain size mapping with remote sensing data. Landsat TM data which show reasonable relationships with grain size values are used as secondary information for sediment grain size mapping near the eastern part of Anmyeondo and Cheonsuman bay. The case study results showed that uncertainty attached to prediction at unsampled locations was significantly reduced by integrating remote sensing data through the analysis of conditional variance from conditional cumulative distribution functions. It is expected that the kriging-based approach presented in this paper would be efficient integration and analysis methodologies for any environmental thematic mapping using secondary information as well as sediment grain size mapping.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.496-507
• /
• 2006

A hybrid approach integrating both high-resolution and hyperspectral data sets was used to map vegetation cover of a coastal lowland area in the Hawaii Volcanoes National Park. Three common grass species (broomsedge, natal redtop, and pili) and other non-grass species, primarily shrubs, were focused in the study. A 3-step, hybrid approach, combining an unsupervised and a supervised classification schemes, was applied to the vegetation mapping. First, the IKONOS 1-m high-resolution data were classified to create a binary image (vegetated vs. non--vegetated) and converted to 20-meter resolution percent cover vegetation data to match AVIRIS data pixels. Second, the minimum noise fraction (MNF) transformation was used to extract a coherent dimensionality from the original AVIRIS data. Since the grasses and shubs were sparsely distributed and most image pixels were intermingled with lava surfaces, the reflectance component of lava was filtered out with a binary fractional cover analysis assuming that tile total reflectance of a pixel was a linear combination of the reflectance spectra of vegetation and the lava surface. Finally, a supervised approach was used to classify the plant species based on tile maximum likelihood algorithm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.126-136
• /
• 2008

Tobacco plants grown in pots by sand culture for 70 days after transplanting were used to evaluate the sensing distance and measurement efficiency of ground-based remote sensors. The leaf distribution of tobacco plant and sensing distance from the sensors to the target leaves were controlled by two removal methods of leaves, top-down and bottom-up removal. In the case of top-down removal, the canopy reflectance was measured by the sensor located at a fixed position having an optimum distance from the detector to the uppermost leaf of tobacco every time that the higher leaves were one at a time. The measurement of bottom-up removal, a the other hand, was conducted in the same manner as that of the top-down removal except that the lower leaves were removed one by one. Canopy reflectance measurements were made with hand held spectral sensors including the active sensors such as $GreenSeeker^{TM}$ red and green, $Crop\;Circle\;ACS-210^{TM}$ red and amber, the passive sensors of $Crop\:Circle^{TM}$, and spectroradiometer $SD2000^{TM}$. The reflectance indices by all sensors were generally affected by the upper canopy condition rather than lower canopy condition of tobacco regardless of sensor type, passive or active. The reflectance measurement by $GreenSeeker^{TM}$ was affected sensitively at measurement distance longer than 120 cm, the upper limit of effective sensing distance, beyond which measurement errors are appreciable. In case of the passive sensors that has no upper limit of effective distance and $Crop\;Circle^{TM}(ACS210)$ that has the upper limit of effective sensing distance specified with 213 cm, longer than that of estimated distance, the measurement efficiency affected by the sensing distance showed no difference. This result suggests that it is necessary to use the sensor specified optimum distance. The result revealed that active sensors are more superior than their passive counterparts in establishing between the relative ratio of reflectance index and the dry weight of tobacco treated by top-down removal, and in the evaluation of biomass. $The\;Crop\;Circle\;ACS-210^{TM}$ red was proved to have the highest efficiency of measurement, followed by $Crop\;Circle^{TM}(ACS210)$ amber and $GreenSeeker^{TM}$ red, $Crop\;Circle^{TM}$ passive, $GreenSeeker^{TM}$ green, and spectroradiometer, in descending order.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.1
• /
• pp.23-31
• /
• 2014

In this study, the method to measure effectively the ground surface displacement of slope was proposed using the Laser Distance Measurer (LDM). Applying the proposed technique is more simple and easier than the complicated and high-priced instrument to measure the ground surface displacement. LDM is an instrument that the red laser aimed at the target and then the reflected laser used for calculating the distance. The advantages of LDM are easy operating method, high measurement precision and lower in price. To check the feasibility, the proposed method applied to the real site that the ground surface displacement of slope was occurred continuously. The ground surface displacements were occurred in various points of the natural and cut slopes located at the lower part of coal mine waste heap due to the load of waste heap. To measure directly the ground surface displacement in this site, 6 measurement sections and 26 measurement points were selected. As the result of the displacement measured by the proposed technique within a certain period time, the accumulative ground surface displacement could be measured as well as the velocity of displacement could be estimated. Also, the progress direction of ground surface displacement can be confirmed and predicted through the analysis of all measured result.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.779-787
• /
• 2011

This study was conducted to evaluate the usefulness of ground-based remote sensing for the estimation of rice yield and application rate of N-fertilizer during growing season. Dongjin-1, Korean cultivar of rice was planted on May 30, 2006 and harvested on October 9, 2006. Chlorophyll content and LAI (leaf area index) were measured using Minolta SPAD-502 and AccuPAR model LP-80, respectively. Reflectance indices were determined with passive sensors using sunlight and four types of active sensors using modulated light, respectively. Reflectance indices and growth rate were measured three times from 29 days to 87 days after rice plating and at harvesting day. The result showed that values of growing characteristics and reflectance indices were highly correlated. Growing characteristics to show significant correlation with reflectance indices were in order of followings: fresh weight > N uptake > dry weight > height > No. of tiller > N content. Chlorophyll contents measured by chlorophyll meter (SPAD 502) showed high correlation with nitrogen concentration (r=$0.743^{**}$), although the correlation coefficients between remote sensing data and nitrogen concentration were higher. LAI was highly correlated with dry weight (r=$0.931^{**}$), but relationship between LAI and nitrogen concentration (r=$0.505^*$) was relatively low. The data of CC-passive sensor were negatively correlated with those of the near-infrared. NDVI correlation coefficients found more useful to identify the growth characteristics rather than data from single wavelength. Both passive sensor and active sensor were highly significantly correlated with growth characteristics. Consequently, quantifying the growth characteristics using reflectance indices of ground-based remote sensing could be a useful tool to determine the application rate of N fertilizer non-destructively and in real-time.

• Korean Journal of Optics and Photonics
• /
• v.29 no.5
• /
• pp.204-214
• /
• 2018

Since LIDAR is advantageous for accurate information acquisition and realization of a high-resolution 3D image based on characteristics that can be precisely measured, it is essential to autonomous navigation systems that require acquisition and judgment of accurate peripheral information without user intervention. Recently, as an autonomous navigation system applying LIDAR has been utilized in human living space, it is necessary to solve the eye-safety problem, and to make reliable judgment through accurate obstacle recognition in various environments. In this paper, we construct a single-shot LIDAR system (SSLs) using a 1550-nm eye-safe light source, and report the analysis method and results of LIDAR signals for various measurement environments, reflective materials, and material angles. We analyze the signals of materials with different reflectance in each measurement environment by using a 5% Al reflector and a building wall located at a distance of 25 m, under indoor, daytime, and nighttime conditions. In addition, signal analysis of the angle change of the material is carried out, considering actual obstacles at various angles. This signal analysis has the merit of possibly confirming the correlation between measurement environment, reflection conditions, and LIDAR signal, by using the SNR to determine the reliability of the received information, and the timing jitter, which is an index of the accuracy of the distance information.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.467-475
• /
• 1998

악안면 영역에 동통이 가하여지면 회피반사의 일종인 개구반사가 유발되며, 개구반사의 크기는 뇌간의 중추에 전달된 동통의 크기에 비례한다. 따라서 동통의 정도를 악이복근의 근전도를 이용하여 정량화 할 수 있고 동통의 지표로 이용할 수 있다. 본 실험은 악안면동통에 의하여 유발된 개구반사의 크기가 침점(족삼리) 전기자극으로 감소되는지와 이러한 전기침의 효과가 나타나는데 opioid 물질이 관여하는지에 대하여 연구하고자 하였다. 8주 이상, 150g이상의 Sprague-Dawley계 쥐 34 마리를 암수 구별없이 이용하여 실험하였다. 복강 내 Urethane용액(1.5g/kg)을 주입 전신마취하고 악이복근을 노출시켜 근전도 기록을 위한 한쌍의 선전극을 삽입하였다. 동통유발을 위하여 구강내 하악 이공주변에 0.1mm의 선전극을 한쌍 삽입하고 전기자극기에 연결하였다. 유해자극 조건은 duration $100{\mu}sec$, interval 5sec의 pulse로 정하고 자극의 크기는 개구반사를 일으키는 역치의 2배 크기로 하며 매 측정시마다 동일 자극을 10회식 가하여 평균하였다. 침점의 전기자극을 위하여 침점의 하나인 족삼리(Zusanli)에 표면전극(넓이 $0.4cm^2$ 정도)을 부착하고 자극부위가 약한 근수축을 일으키는 강도인 $100{\mu}sec$, 5V, 2Hz의 자극을 20분간 가하였다. 악이복근의 근전도는 교류증폭기 (Dam80, WPI, USA) 에서 1000배 증폭하여 유해자극이 가해진 순간 oscilloscope 에서 관찰하여 그 크기를 측정하였다. 침점의 전기자극으로 나타나는 진통효과가 opioid의 분비와 관련있는지 알아보기 위하여 opioid 의 길항제인 naloxone(0.2mg/kg)을 복강 내로 투여하였다. 실험군을 4군(group I - IV)으로 분류하였고 각 군에서 근전도를 측정한 단계는 다음과 같다. group I : control 침점에 전기자극 20 분간 가한후(EA), 20분후(EA20) group II : control 침점에 전기자극 20분간 가한후(EA), naloxone 투여 20분후(NX) group III : control naloxone 투여 5분후 침점에 전기자극 20분 가한후(NxEA20) group IV : control naloxone 투여 20분후(NX20) 구강내에 가해진 유해자극에 의하여 발생하는 악이복근 근전도는 족삼리 침점의 전기자극으로 그 크기가 감소하였고 이러한 침점자극의 효과는 naloxone의 투여로 인하여 억제되었다. 이와 같은 결과는 침점자극으로 진통작용이 나타나는데에 opioid 물질이 관여하고 있음을 시사한다.