• Title/Summary/Keyword: 지터

Search Result 355, Processing Time 0.029 seconds

Jitter Measurements in High-Speed Serial Data Signals (고속직렬데이터의 지터 측정방법)

  • Kwon, W.O.;Kim, S.W.;Kim, M.J.
    • Electronics and Telecommunications Trends
    • /
    • v.20 no.3 s.93
    • /
    • pp.112-121
    • /
    • 2005
  • 고속직렬프로토콜의 출현으로 기존의 병렬 인터페이스에서 중요하게 사용되던 파라미터들의 의미가 변화되고 있다. 특히 ‘1’, ‘0’의 디지털 신호가 고속의 차동신호로 전송되면서 신호 무결성의 파라미터로 지터(jitter)가 중요한 의미를 가지게 되었다. 본 고는 지터의 발생과 분석, 테스트 등 전분야를 다루고 있다. 지터를 분석하기 위한 방법으로 Eye Diagram, Bathtub 곡선, TIE 히스토그램 등을 다루며 이러한 방법을 사용하여 지터를 각각의 특성별로 분리한다. 그리고 지터를 테스트 장비와 각각의 특징을 살펴본 후 PCI Express 트랜시버 지터 테스트의 실례를 통하여 지터 테스트 방법과 분석을 보여준다.

Analysis of Jitter Buffer for VoIP Transmission Quality Improvement (VoIP 전송 품질 향상을 위한 지터 버퍼 분석)

  • Park, Tae-Hwan;Park, Seok-Cheon;Park, Jung-Hwan
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2015.04a
    • /
    • pp.87-89
    • /
    • 2015
  • 최근 빠른 속도와 사용자의 증가로 VoIP 기술에 대한 관심이 높아지고 있다. 본 논문에서는 VoIP의 개요와 VoIP 환경에서 전송 품질에 영향을 주는 요소인 지터의 정의와 지터를 개선하기 위한 지터 버퍼에 대해 설명한다. 지터 버퍼는 크게 고정형과 적응형, 두 가지로 나누어지며 지터 버퍼에 대한 분석을 통해 지터 버퍼 성능 향상 방안을 제안한다.

The Analysis of Event-based Jitter Buffer Algorithm (이벤트 방식 지터 버퍼 알고리즘의 분석)

  • Choi, Seung-Han;Park, Jong-Min;Seo, Chang-Ho
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.23 no.5
    • /
    • pp.867-871
    • /
    • 2013
  • In this paper, a major factor in determining voice quality that corresponds to the jitter and jitter buffer algorithm for removing jitter will be described. We analyze various jitter buffer algorithms and suggest ways to improve performance of jitter buffer algorithm.

A Study on Techniques for the Reduction of SRTS Jitter and Pointer Adjustment Jitter (SRTS 지터와 포인터 조정 지터의 감소 방식에 관한 연구)

  • Choi, Seung-Kuk
    • The KIPS Transactions:PartC
    • /
    • v.10C no.4
    • /
    • pp.455-462
    • /
    • 2003
  • Techniques for the reduction of SRTS jitter and pointer adjustment jitter are studied. To reduce the stuffing jitter several methods have been proposed, such as bit leaking, stuff threshold modulation and sigma delta modulation. The characteristics of jitter generated in SRTS and pointer adjustment systen implementing these reduction techniques is analyzed with computer simulation. The results show that ms jitter value decreases to less than 50% as compared to a conventional pointer adjustment system. The amplitude of SRTS jitter using new techniques decreases or Increases dependent on system parameter.

Timing Jitter Compensation in Data-Driven Echo Canceller (Data-Driven 반향 제거기를 위한 타이밍 지터 보상)

  • 이재혁;이용환
    • Proceedings of the IEEK Conference
    • /
    • 2000.09a
    • /
    • pp.565-568
    • /
    • 2000
  • 본 논문에서는 data-driven 반향제거기 구조에서 타이밍 지터의 보상 방법을 제안한다. V.90PCM 모뎀환경에서 네트윅 클록에 동기가 되어 동작하는 사용자 터미널 모뎀이 디지털 PLL (DPLL)을 이용하여 타이밍 복원을 하면 타이밍 지터 성분이 반향제거기의 성능을 순간적으로 악화 시키게 된다. 제안된 방법은 두개의 계수세트 들로부터 타이밍 지터 발생시 필요한 계수를 디콘볼루션 알고리듬을 이용하여 FIR 필터링을 통해 구하며 발생하는 지터 성분 의 대부분을 보상 해 준다. 또한 제안 방법은 waveform driven 반향제거기에 비해 약간의 성능열화가 있지만 적은 연산량으로 타이밍 지터보상을 할 수 있는 장점이 있다.

  • PDF

Systematic and Random Jitter Accumulation in Digital Transmission (디지틀 전송에서 시스템/랜덤 지터 누적)

  • 유홍균;안수길
    • The Journal of the Acoustical Society of Korea
    • /
    • v.5 no.2
    • /
    • pp.13-18
    • /
    • 1986
  • 디지틀 데이터 전송시 수신기에서 또는 중계기에서 송신 데이터를 구하기 위해서는 타이밍 클럭 을 복원해야 한다. 대개의 실장된 경우에서는 PLL을 이용하는데, 이때 시스템/랜덤 지터가 발생되고 또 중계기가 늘어남에 따라서 생성된 지터가 누적되는데 이것을 해석하였다. 90 Mbps 광통신 시스템에 적 용하여 테이블 1,2,3,4와 같은 결과를 얻었으며, 시스템 지터가 랜덤 지터보다 더 급격히 누적됨을 알았 고, 또한 댐핑팩터가 커짐에 따라 지터 누적이 양화됨을 알았다.

  • PDF

Pointer Adjustment Jitter Reduction Method Using Bit Stuf fing Technique (비트 스타핑 방식을 이용한 포인터 조정 지터의 감소방법)

  • Choi Seung-Kuk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.7
    • /
    • pp.1196-1201
    • /
    • 2006
  • In pointer adjustment systems, 3 byte SDH clocks are controlled for synchronization. Therefore large jitter is generated in that systems. Bit stuffing technique was introduced as method for reducing pointer adjustment jitter. However, the jitter generated in this systems is also not so small. In this paper, the problems in the bit leaking system are analyzed and new bit stuffing technique is introduced to reduce the jitter sufficiently.

A Study on Bit Leaking Pointer Adjustment litter (비트 리킹 포인터 조정 지터에 관한 연구)

  • 최승국;이기영
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.6
    • /
    • pp.1091-1095
    • /
    • 2004
  • Bit leaking technique is analyzed as method for reducing pointer adjustment jitter. The method for jitter reduction is described, and simulation results are represented to illustrate rms jitter performance. The results show that rms jitter value decrease to less than 25% as compared to a conventional pointer adjustment system.

A Study on Jitter Generated in STM Pointer Adjustment System (STM 포인터 조정 장치에서 발생되는 지터에 관한 연구)

  • 최승국
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.7 no.8
    • /
    • pp.1848-1853
    • /
    • 2003
  • Stuff threshold modulation(STM) technique is analyzed as method for reducing pointer adjustment jitter. The method for jitter reduction is described, and simulation results are presented to illustrate rms jitter performance. The results show that rms jitter value decrease to less than 50% as compared to a conventional pointer adjustment system.

Network Jitter Estimation Algorithm for Robust VoIP System in Vehicle Environment (자동차 환경내 안정적인 VoIP 시스템을 위한 네트워크 지터 추정 알고리즘)

  • Seo, Kwang-Duk;Lee, Jin-Ho;Kim, Hyoung-Gook
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.10 no.4
    • /
    • pp.93-99
    • /
    • 2011
  • This paper proposes a novel network jitter estimation algorithm for robust VoIP communication system. The proposed method computes the current network environment mode using the differences of arrival time and generation time from sequential received packets. According to the current network environment mode, the jitter variance weights is adjusted to minimize the error for estimating the network jitter. The jitter average and variance are calculated by the autoregressive estimated algorithm, and then the network jitter is estimated by applying the jitter variance weights.