• 기술발표회
• /
• s.2006
• /
• pp.115-132
• /
• 2006

본 글은 부산-김해간 경량전찰 건설공사의 기초설계시 현장타설말뚝 기초의 지지층을 모래자갈층으로 적용한 사례이다. 낙동강 유역은 퇴적층이 발달하여 풍화암 이상의 기반암층이 지표하 60~80m 이후에서 출현하며, 40m 이상의 심도에서 매우 조밀한 상태의 모래자갈층이 10-20m 두께로 분포하고 있어, 모래자갈층을 관통하여 기반암에 말뚝기초를 지지할 경우 기초공사에 상당한 기간이 소요될 뿐만 아니라, 시공성과 경제적인 측면에서 매우 불리하다. 이에 대한 개선방안으로 대구경 현장타설말뚝을 N치 50 이상의 조밀한 상태의 모래자갈층에 지지하였으며, 인근현장의 적용사례, 기초 구조물 안전성 검토 및 현장재하시험 등의 비교분석을 통하여 모래자갈 지지층의 적정성을 확인하였다. 따라서, 풍화암 이상의 지지지반 출현심도가 60m 이상으로 매우 깊고, 지지지반 상부에 모래자갈층이 두껍게 분포하는 경우에는 모래자갈층을 말뚝기초의 지지층으로 활용하는 방안이 시공성 및 경제성 측면에서 합리적이라 판단된다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.73-74
• /
• 1996

역삼투막은 높은 투과율과 배제율, 기계적 강도, 열적 안정성, 화학적 안정성, 성형성, 경제성 등의 여러 가지 조건을 동시에 만족시켜야 한다. 복합막을 통한 역삼투막의 제조는 위의 조건들을 만족시키는 역삼투막을 제조할 수 있는 훌륭한 제조 방법인데 지지막과 표면의 활성층을 여러 가지로 조합하여 다양한 성능의 막을 개발할 수 있기 때문이다. 지지막은 다공질의 고분자막으로 기계적 강도, 화학적.열적 안정성 등이 있어야 하는데 역삼투막이 가혹한 운전 조건에서 조작되기 때문이다. 그리고 지지막은 활성층과 안정된 결합을 할 수 있는 물리적 및 화학적 성질을 지녀야 한다. 활성층은 분리가 일어나는 곳으로 막의 배제율과 투과특성에 큰 영향을 미친다. 따라서 복합막의 제조에 있어서 고려되어야 할 사항은 지지막과 활성층의 재질의 선택, 지지막의 특성, 지지막 위에 얇고 안정된 활성층의 도포 방법, 성능향상과 활성층의 안정화를 위한 제조된 복합막의 후처리 방법 등이다. 지지막 위에 활성층을 도포시키는 방법은 계면중합법, 박층분산법, 침지코팅법, 기상증착법 등을 들 수 있는데 이 중에서 계면중합법을 이용한 복합막의 제조가 가장 실용적인 방법으로 인정되고 있고 현재 실용화되어 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.82-90
• /
• 1999

The buddhistic painting of Song-Kwang temple in Seungjoo-gun, Chonnam, Korea is not known in chronicle, but it could be estimated to works in the early 19th century through it's remaining records and qualities of materials. And it was analysed the qualities of materials consisting of pigment layer, silken-ground layer and support layer in order to preserve buddhistic painting, made back-adherent paper of the support layer proper to it, tested its compatibility, and then concluded as follows. 1. The section structures of buddhistic painting is consisted of the pigment layer, silken-ground layer of silk and the support layer of Korean hand made paper, it could be recognized that buddhistic painting in 19th century was basically composed of the pigment layer, the silken-ground layer and the support layer. Moreover the pigment layer and the silken-ground layer got adhered with glue, and sheets of support layers got back adhered with paste. 2. The support layer of buddhistic painting consisted of 5 layers and two kinds of paper were used for them. The first and second layers were composed of Korean hand made paper made of pure paper mulberry bast fibers, and the rest of them of paper that paper mulberry bast fibers were mixed into recycled hemp fibers. Though it is difficult to assert without the security of more data, finding out the then situation through the qualities of materials, it was presumed that the society in 19th century was suffered from economical difficulties and the operation of the paper industry of temples was rather difficult and so low-qualitative recycled hemp fibers might used for back-adherent paper. 3. Considering tension between silken-ground layers and support layers of this materials, newly made back-adherent paper was used for repair, and then I could conform that it was proper to back-adherent paper for repair.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.251-256
• /
• 2013

In this study, acetylated methyl cellulose (AMC) was successfully used as a support layer of thin film composite (TFC) forward osmosis (FO) membrane. A selective polyamide active layer, interfacially polymerized, was coated on top of various substrate layers. The structure and performance of the TFC FO membrane based on the AMC substrate were compared with those of TFC FO membranes with different polymeric support layers. The experimental results showed that the AMC FO membrane performance was better than other FO membranes due to its characteristic morphology and lower back diffusion rate of salts.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.281-290
• /
• 2016

Thin film composite (TFC) polyamide membranes were prepared on polysulfone (PSF) supports for forward osmosis (FO) applications. To understand the influence of polarity and porosity of support layer on the formation of polyamide structure and the final FO performance, clathochelate metal complex (MC) contained PSF supports were prepared via the phase inversion process from various PSF casting solutions containing 0.1-0.5 wt% of MC in dimethyl formamide (DMF) solvent (18 wt%). A crosslinked aromatic polyamide layer was then fabricated on top of each support to form a TFC membrane. For the porous PSF supports prepared with relatively low concentration casting solutions (12 wt%), the PET film was removed after phase inversion and crosslinked aromatic polyamide layer was then fabricated. The tested sample from PSF (18 wt%)/MC (0.5 wt%) casting solution presented outstanding FO performance, almost similar water flux (9.99 LMH) with lower reverse salt flux (RSF, 0.77 GMH) compared to commercial HTI FO membrane(10.97 LMH of flux and 2.2 GMH of RSF). By addition of MC in casting solution, the thickness of the active layer in FO membranes was reduced, however, the increased RSF value was obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.197-197
• /
• 2011

고온 스퍼터 공정과 구리 리플로우 공정을 통해 다공성 니켈 지지체에 팔라듐-구리-니켈 삼원계 합금 수소 분리막을 제조하였다. 그러나 스퍼터와 같은 물리적 증착법은 주로 주상정 형태로 증착되기 때문에 다공성 니켈 지지체 표면의 수마이크론 내외의 기공이 존재할 경우 다공성 니켈 지지체에 기인한 많은 기공들 때문에 스퍼터 증착에 영향을 주어 수소 분리막 표면에 기공들이 존재하게 된다. 이를 방지하고 균일한 증착이 이루어지도록 다공성 지지체 표면의 전처리 공정이 필요하다. 본 연구에서는 스퍼터 코팅에 의한 균일한 팔라듐 금속층 형성하고 표면에 미세기공이 없는 수소 분리막을 제조하기 위해 다공성 니켈 지지체를 니켈도금, 알루미나 분말 주입 및 미세연마 전처리 공정을 통하여 다공성 니켈 지지체의 표면기공들을 매립하여 치밀한 팔라듐 합금 층을 형성하였다. 전처리를 하지 않은 다공성 니켈 지지체는 팔라듐 및 구리의 고온 스퍼터 증착 및 구리 리플로우 공정에 의해 표면 기공을 막을 수가 없었고 수소분리기능이 없어 수소 분리막으로 역할을 하지 못했다. Al2O3 분말 주입 전처리 공정을 한 다공성 니켈 지지체에 팔라듐 및 구리 고온 스퍼터 증착과 구리 리플로우 공정을 이용하여 제조된 수소 분리막은 다공성 니켈 지지체에 기인한 기공을 메우기 위해서 팔라듐 합금 층이 두꺼워지는 어려움이 있었다. 니켈도금 전처리 공정을 한 다공성 니켈 지지체에 형성한 수소 분리막은 우수한 선택도를 가졌으나 도금 전처리에 사용된 $2{\mu}m$ 두께의 니켈층이 수소의 확산을 방해하는 저항막 역할을 하여 수소 투과도가 3.96 $ml{\cdot}cm-2{\cdot}min-1{\cdot}atm-1$으로 낮게 나타났다. 미세연마 전처리 공정을 한 다공성 니켈 지지체에 형성한 수소 분리막 역시 우수한 수소 선택도를 가졌으며, 수소의 확산을 방해하는 저항막이 존재하지 않아 13.2 $ml{\cdot}cm-2{\cdot}min-1{\cdot}atm-1$의 우수한 수소 투과도를 나타내었다.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.83-88
• /
• 2001

A methodology for enhancing the bond strength of a coating layer with a support has been established in preparing low-pressure reverse osmosis mO) hollow fiber which would experience shear badly in flowing feed un it. Prior to coating process, the support membrane, ultrafiltratiun polysulfone(PS) hollow fibers was pretreated with a reaction solution containing glutaraldehyde (GAl which has a good affinity to the suppurt membrane material as well as a reactivity to some of the cunstituents of cuating layer subsequently formed on the support by interfacial polymerization. Therefore, the reactant GA distributed unifonnly over the support layer through the pretreatment could provide a strong adhesive bond between the coating layer and the support, sticking fast to the support membrane through physical bond and, at the same time, connecting its functional group with the coating laycr by chemical bonding. Due to the strong adhesive bond, the resulting hollow fiber membrane showed an excellent long-tcnn stability in pcnneation.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.395-402
• /
• 2009

The atomic force microscopy(AFM) has been used, as a powerful tool, to investigate physical properties of supported-lipid layers. Prior to the advent of the AFM, no observation was performed for the physical phenomena at the nanometer-scale. This microscope provides nanometer-scale morphology by scanning surfaces with the cantilever and presents force curve by monitoring the behavior of the cantilever that approaches to surface and retracts from the surface. From the morphology, the structures of the supported lipid layer and the effect of other molecules on the structures have been investigated. From the force curve, the surface properties-electrostatic and mechanical properties-of the supported lipid layers have been studied. In this article, characterization of the structure and surface properties of the supported lipid layer is explained. Future perspectives and direction are also discussed.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.29-41
• /
• 1999

This Paper applied a simple strength parameter averaging method to double layered systems consisting of the strong sand layer overlying the soft clay deposit. This study derived a formula which defines a critical depth as the strength parameters, and used the correction parameter, $\alpha$ to reduce an error of the strength parameter averaging method. The results of the method were presented in the form of dimensionless charts and were compared with the results of several solutions proposed by Satyanarayana & Grag, Sreenivasulu, and Meyerhof & Hanna. The results of the proposed method coincided with the method of Meyerhof & Hanna and the results obtained from FLAC. But the Satyanarayana & Grag method and the Sreenivasulu method overestimated the bearing capacity. Consequently, the bearing capacity of foundation on sand layer overlying soft clay layer can be approximately estimated by using the proposed dimensionless charts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.237-242
• /
• 1993

The bearing capacity of the sand foundation including a thin dense sand layer depends on the stiffiness, thickness and the location of the dense sand layer. In this paper was the influence of the dense sand layer on both the bearing capacity and the failure configuration is studied by means of K.E.M(Kinematic Element Method). K.E.M was implemented to get the excat solution starting from the upper bound of the analysis. The result show that the bearing capacity of the foundation and the failure configuration is greatly influenced by the dense sand layer, when the layer is located not deeper than 3/5 of the foundation width.