• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.405-414
• /
• 2021

This study predicted waxy corn harvest date in South Korea using 30-year (1991-2020) hindcasts (1-6 month lead) produced by the Pusan National University Coupled General Circulation Model (PNU CGCM)-Weather Research and Forecasting (WRF) chain. To estimate corn harvest date, the cumulative temperature is used, which accumulated the daily observed and predicted temperatures from the seeding date (5 April) to the reference temperature (1,650~2,200℃) for harvest. In terms of the mean air temperature, the hindcasts with a bias correction (20.2℃) tends to have a cold bias of about 0.1℃ for the 6 months (April to September) compared to the observation (20.3℃). The harvest date derived from bias-corrected hindcasts (DOY 187~210) well simulates one from observation (DOY 188~211), despite a slight margin of 1.1~1.3 days. The study shows the possibility of obtaining the gridded (5 km) daily temperature and corn harvest date information based on the cumulative temperature in advance for all regions of South Korea.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.60-67
• /
• 2022

An Electro-Optical Tracking System (EOTS) is an electric optical system with EO/IR cameras, laser sensors, and an IMU. The EOTS calculates coordinates of targets, using attitude and acceleration measured by the IMU. In particular for an armed aircraft, the performance of the weapon system depends on how quickly and accurately it acquires the target coordinates. The IMU should be operated after alignment is complete, to meet the coordinate accuracy required by the weapon system so the initial stabilization time of the IMU should be reduced, by quickly measuring the attitude and acceleration. Alignment is the process of determining the initial attitude by resolving the attitude error of the IMU, and the IMU of mission equipment such as an airborne EOTS, uses velocity matching based on the velocity from GPS/INS for aircraft navigation. In this paper, a method is presented to improve the transfer alignment performance of the airborne EOTS, by maneuvering aircraft and the mission equipment. First, the performance factor of the alignment was identified, as a heading error through the velocity matching model and simulation results. Then acceleration maneuvers and attitude changes were necessary, to correct the error. As a result of flight tests applied to an EOTS on a OOO aircraft system, the transfer alignment performance was improved as the duration time was decreased, by more than five times when the aircraft accelerated by more than 0.2g and the EOTS was moving until 6.7deg/s.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.203-217
• /
• 2007

In this paper, a performance evaluation model of Networks with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the switch networks. The characteristic of a network with crossbar switches is determined by both the connection pattern of the switches and the limitation of data flow in a each switch. In this thesis, the evaluation models of three different networks : Multistage interconnection network, Fat-tree network, and other ordinary communication network are developed. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. Two important parameters of the network performance, throughput and delay, are evaluated. The proposed model takes simple and primitive switch networks, i.e., no flow control and drop packet, to demonstrate analysis procedures clearly. It, however, can not only be applied to any other complicate modern switch networks that have intelligent flow control but also estimate the performance of any size networks with multiple-buffered switches. To validate the proposed analysis model, the simulation is carried out on the various sizes of networks that uses the multiple buffered crossbar switches. It is shown that both the analysis and the simulation results match closely. It is also observed that the increasing rate of Normalized Throughput is reduced and the Network Delay is getting bigger as the buffer size increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1188-1195
• /
• 2006

This paper presents an efficient design method of 2-D state-space digital filter based on an improved branch-and -bound algorithm. The resultant 2-D state-space digital filters whose coefficients are represented as the sum of two power-of-two terms, are attractive for high-speed operation and simple implementation. The feasibility of the proposed method is demonstrated by several experiments. The results show that the approximation error and group delay characteristic of the resultant filters are similar to those of the digital filters which designed in the continuous coefficient space.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.101-105
• /
• 2008

This paper proposes an analytical model to calculate VoIP (Voice of IP) capacity over wireless LANs with frequent bit errors. Since the traditional analytical models for VoIP capacity have not included the effect of bit errors, simulations ould only evaluate VoIP capacity over erroneous channels. For analytically accurate estimation of VoIP capacity over noisy channels, we extend the conventional model to include the effect of propagation errors, end-to-end delay, voice quality, the waiting time in AP(Access Point). The experiments show that our model predicts the VoIP capacity of a given network within the range from 3% to 9% difference comparing with the simulation results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.102-107
• /
• 2006

In this paper, we propose a method of a sound synthesis of Korean plucked string instrument, gayageum, by physical modeling which use impulse responses of body and Anjok. Gayageum consists of three kinds of systems: string, body, and Anjok. These are a serial combination of linear time invariant systems. String can be modeled by digital delay line. Body and Anjok can be estimated by their impulse responses. We found three resonance frequencies in the body impulse response, and implemented resonator as body. Anjok was implemented as high pass filter in fundamental frequency band of gayageum. RMSEs of synthesized sounds are distributed from 0.01 to 0.03. It was difficult to distinguish the resulting synthesized sounds from the originals sound by ear.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.48-55
• /
• 2016

The autoignition temperature (AIT) of a material is the lowest temperature at which the material will spontaneously ignite. The AIT is important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs of n-hexanol+p-xylene system by using ASTM E659 apparatus. The AITs of n-hexanol and p-xylene system which constituted binary system were $275^{\circ}C$ and $557^{\circ}C$, respectively. The experimental AITs of n-hexanol+p-xylene system system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.3-8
• /
• 2013

In CDMA-based systems, recently, researches on chip-level equalization have been studied in order to improve receiving performance when supporting high-rate data services. In this paper, we consider a chip-level LMMSE (linear minimum mean-squared error) receiver for D-TxAA (dual stream transmit antenna array) based single stream HSDPA MIMO systems using precoding weights. First, we will derive precoding weights for maximizing the total instantaneous received power. We will also analyze the effects of both transmit delay of precoding weights and mobile velocity on chip-level LMMSE receivers, which is verified through computer simulations in various mobile channel environments.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.161-164
• /
• 1999

본 논문에서는 표적 추적 시스템에서 센서 어레이에 입사되는 표적신호에 대한 센서 출력 신호간의 지연시간 추정(TDE:Time Delay Estimation)을 위해 백색상호 상관법(CSP:Cross-Power Spectrum Phase Analysis)을 이용한다. 그러나 음파의 다중경로 전달특성 및 배경잡음의 영향으로 인해 CSP계수는 많은 클러터(Clutter)를 포함하게 되고 결국 방위 추정 오차의 요인이 된다. 따라서 센서 어레이 중심좌표를 기준으로 대칭 배열된 센서쌍(Pair)에 대한 CSP계수를 동기가산 하여 실제 표적 방향 이외의 방향정보를 제거하는 방법을 제안한다. 시간에 따라 각도를 변침하는 표적에 대한 표적기동분석 (BOTMA:Bearings Only Target Motion Analysis)을 위해 매 관측시간마다 동기가산을 행한 CSP결과를 누적하여 방위각 궤적을 형성하였을 때 시간 Window에 따라 약간의 차이는 있지만 약 10dB의 궤적 추적 성능을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.267-274
• /
• 2004

In this paper, a new on-line dead-time compensation method is proposed. The output voltage errors due to the dead-time effect is considered as disturbance voltages. The magnitude of the disturbance voltages is estimated using a time delay control technique and the disturbance voltages are calculated using the estimated values, measured currents, and position information. The calculated disturbance voltages are fed to voltage references in order to compensate the dead-time effect. The proposed method is applied to a PM synchronous motor drive system and implemented in a digital manner using a digital signal processor (DSP) TMS320C31. The experiments are carried out for this system to show the effectiveness of the proposed method and the results show the validity of the proposed method.