• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.496-506
• /
• 2017

This study tried to examine the validity of the technical and institutional method to perform the purpose of public interest in terrestrial broadcasting. For this purpose, this study concentrated to the rate of direct reception of the terrestrial broadcasting that government and broadcasting company have offered since the digital transition. Results of analysis, it appeared that have not possibility of realization to set the direct receiving antenna and built-in Antenna for enhanced reception of the signal of the terrestrial broadcasting. Second, the MMS, if not enhanced the direct reception, was expected that repeated the retransmission through the pay broadcasting as the time of digital transition. Finally, the disaster broadcast was revealed that reduce the effectiveness of the UHD TV policy because of the mutual interference between frequencies and the incomplete solution of shadow area. According to these results, it is expected to be difficult for a while to perform the purpose of public interest in UHD TV.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.305-315
• /
• 2020

The purpose of this study is to compare algorithms of single photo resection, which determines the exterior orientation parameters used in fields such as photogrammetry, computer vision, robotics, etc. To this end, the algorithms were compared by generating experimental data by simulating terrain based on a camera used in aerial and close-range photogrammetry. Through experiments on aerial photographic camera that was taken almost vertically, it was possible to determine the exterior orientation parameters using three ground control points, but the Procrustes algorithm was sensitive to the configuration of the ground control points. Even in experiments with a close-range amateur camera where the attitude angles of the camera change significantly, the algorithm was sensitive to the configuration of the ground control points, and the other algorithms required at least six ground control points. Through experiments with two types of cameras, it was found that cosine lawbased spatial resection shows performance similar to that of a traditional photogrammetry algorithm because the number of iterations is short and no explicit initial values are required.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.401-412
• /
• 2022

In this study, we investigated the design methods of satellite constellations to conduct near-real-time surveillance reconnaissance of the Korean Peninsula. Also, we designed satellite constellations utilizing the Walker-Delta method and repeat-ground-track method, and taking into account the target area and the feasible number of satellites. The constrains of the Electro-Optical and Synthetic Aperture Radar equipment were also considered in performance analysis. As a result, the designed constellation has mean revisit time of less than 30 min which enables near-real-time surveillance reconnaissance of the Korean Peninsula. This research provides the strategy to design the satellite constellation for reconnaissance. Furthermore, it contributes to suggesting an operating strategy for micro-satellites constellation and guidelines for establishing space force.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.179-186
• /
• 2010

The bond between steel and concrete in reinforced concrete members is essential to resist external load, but the bond mechanism in reinforced concrete beams deteriorated by steel corrosion has not been clearly known yet. Most existing researches have dealt with the bond behavior of corroded steel under monotonic loading, but scarce are researches dealing with bond behavior of corroded steel under repeated loading. This study includes the experimental investigation on the bond behavior with respect to the various degrees of steel corrosion under repeated loading. According to the test results, the bond strength of corroded steel under monotonic loading increases as the rate of steel corrosion increases unless the splitting crack occurs. The slip versus number of load cycles relation was found to be approximately linear in double logarithmic scale, not only in specimens without steel corrosion but also in specimens with steel corrosion. The test results also show that the steel corrosion does not negatively affect the bond strength of corroded steel after repeated loading unless the splitting crack occurs. But the fatigue life decreases sharply after splitting crack occurs. This research will be helpful for the realistic durability design and condition assessment of reinforced concrete structures.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.442-453
• /
• 2013

A large-scale high-temperature thermal energy storage(TES) was numerically modeled and the heat loss through storage tank walls was analyzed using a commercial code, FLAC3D. The operations of rock cavern type and above-ground type thermal energy storages with identical operating condition were simulated for a period of five consecutive years, in which it was assumed that the dominant heat transfer mechanism would be conduction in massive rock for the former and convection in the atmosphere for the latter. The variation of storage temperature resulting from periodic charging and discharging of thermal energy was considered in each simulation, and the effect of insulation thickness on the characteristics of heat loss was also examined. A comparison of the simulation results of different storage models presented that the heat loss rate of above-ground type TES was maintained constant over the operation period, while that of rock cavern type TES decreased rapidly in the early operation stage and tended to converge towards a certain value. The decrease in heat loss rate of rock cavern type TES can be attributed to the reduction in heat flux through storage tank walls followed by increase in surrounding rock mass temperature. The amount of cumulative heat loss from rock cavern type TES over a period of five-year operation was 72.7% of that from above-ground type TES. The heat loss rate of rock cavern type obtained in long-period operation showed less sensitive variations to insulation thickness than that of above-ground type TES.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.423-431
• /
• 2008

The control surveying which aims at identifying the coordinate system of satellite images with that of ground is a repeatedly performed essential process to produce digital ortho - photos and it acts as the main factor to increase the production cost of the photos by duplicated budgets and redundant works when executing the projects for acquiring basic geographical information from high density satellite images. During the experimentation, an application system was established for producing a stereo image chip by the analysis of DPPDB file structure, the stereo image chip was produced with SPOT and IKONOS images, the analysis of 3D modeling accuracy was performed to secure the required accuracy and to present the optimal number and deployment of the control points, and a 3D modeling was performed for new SPOT images and lastly, 3D ground coordinates were extracted by the observation of the same points through the overlapping with the new images. As the results of the research, it is proved that the stereo image chip can be used as the ground controls through the accuracy analysis between the coordinates of the images and the ground, close results were obtained between the coordinates by the ground survey and those by the 3D modeling using new images and the observation of the same points, positional changes were not found during observing the same points, and the research presented the methodology for improving the process of the control survey by showing the availability of the image controls on the stereo image chip instead of the ground controls.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.77-85
• /
• 2002

The intention of this study is to extract the spatial and attribute information of road facility for Geospatial Information System(GIS) using graphic solution. Terrestrial photogrammetry has a lot of possibility for the acquisition of road facility information, which has much convenience in locating camera station, selecting the direction, and taking multiple images of the object at the fixed position. This study intended to develop the technique using single frame images only for the raw image data, being able to apply in the case where comparative high accuracy is not required and rigorous photogrammetric method is not available or rapid acquisition of information is need. As the results, we can find the efficiency in plane feature mapping and determining the dimensions of the road facilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.35-41
• /
• 1988

In the three dimensional deformation analysis by terrestrial photographs, iterative reweighted similarity transformation method is used for more accurate displacement computation. Also, Bayesian Inference method is used in the detection of unstable points and the analytical method for displacement patterns analysis is proposed in this study. In results, the accuracy of displacement estimation was improved by applying the weights of least absolute method ($\Sigma$｜d｜⇒min) and more accurate detection of displaced points could be achieved by Bayesian Inference. The analytical method in the patterns of displacement proposed in this study could be adapted to the movement analysis of objects wholly or partly.

• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.268-270
• /
• 2003

Methanol extract obtained from aerial parts of Platycarya strobilacea was successively fractionated with n-hexane, ethylacetate, n-butanol, and water. From ethylacetate fraction, an active compound was isolated through repeated silica gel column chromatography and was identified as 5-hydroxy-2-methoxy-1,4-naphthoquinone by MS and NMR analyses. The compound showed in vivo 76% antifungal activity at $100\;{\mu}g/ml$ against tomato late blight disease.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.69-76
• /
• 2018

This paper studies the Turbo Codes, the concatenation of Turbo Codes and Reed-Solomon (RS) codes on Orthogonal frequency-division multiplexing (OFDM) in digital communication channel, and then analysis the performances of the new concatenated Forward Error Correct (FEC) scheme applied to an OFDM system based on the digital terrestrial video broadcasting (DVB-T) scheme. We compared the results with the standard DVB-T convolutional codes performances on Additive White Gaussian Noise (AWGN) channels. The simulation results shown that by employing turbo codes with only a few numbers of iterations, the performances of the overall system can be improved significantly. These results will be obtained by applying an appropriate interleaver technique in the concatenated FEC procedure.