• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.99-109
• /
• 2020

This study was conducted to improve the education method for improving perception awareness of the visually-impaired. 'Hear me later' was designed and implemented based on VR content that allows the visually-impaired experience in the eyes and environment. The main target is from middle and high school students to adolescents in their twenties. It is consisted of a student, the user's daily life with waking up at home in the morning, going to school, taking classes at school, and disembarking home late in the dark. In addition, 10 quests are placed on each map to induce users' participation and activity. These quests are a daily activity for non-disabled people, but it is an activity to experience uncomfortable activity for visually impaired people. In order to verify the effect of 'Hear me later', 8 participants in their early teens to early 20s' perception of visually impaired people was measured through pre and post evaluation of VR contents experience. In order to verify the effect of'Hear me later', 8 participants in their early teens to early 20s' perception of visually impaired people was measured through pre-post evaluation of VR experiences. As a result, it was found that in the post-evaluation of VR contents experience, the perception of the visually impaired was increased by 30% compared to the pre-evaluation. In particular, misunderstandings and changes in prejudice toward the visually impaired were remarkable. Through this study, the possibility of a VR-based disability experience education program that can freely construct space-time and maximize the experience was verified. In addition, it laid the foundation to expand it to various fields of improvement of the disabled.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.317-326
• /
• 2013

This study was to compare the cumulative survival rate of implant-supported fixed prostheses and to analyze association between risk factors and cumulative survival rate of implant-supported fixed prostheses. In order to assess the clinical status of implant-supported fixed prostheses, individuals who treated in the Department of Prosthodontics, Pusan National University Dental Hospital, between 2000 to 2007 were examined. The results of this study were as follows: 1. Length of service of implant-supported fixed prostheses was $6.6{\pm}32.0$ years (mean), 11.7 years (median). 2. Age and sex of patient was found to have no statistically significant influence on longevity of implant-supported fixed prostheses (P>.05). 3. Reason of tooth extraction wax found to have statistically significant influence on implant-supported fixed prostheses (P<.05). The longevity of fixed prostheses was low in tooth extraction case due to periodontal disease (median:9.0 years). 4. Location of implant-supported fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was low in molar region (median:8.8 years). 5. Number of units in implant-supported fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 6. Condition of opposing dentition was found to have no statistically significant influence on longevity of implant-supported fixed prostheses (P>.05). 7. Food impaction (40.5%), porcelain fracture (25.8%), screw loosening (23.6%) were frequent complications.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.81-95
• /
• 2006

The purpose of this study was to evaluate appropriateness of clothing & textiles as educational contents in practical arts or technology home economics in the 7th curriculum. The factors of appropriateness were the amounts of learning, the degrees of understanding, interest and requirement on the educational content recognized by elementary, middle and high school students. The data collected from evaluation sheets were analyzed by frequency analysis, t-test, crossing analysis using SPSSWIN 12.0 program. Results were as follows; First. more than 50% of elementary, middle and high school students were recognized the amounts of tearing of clothing & textiles proper. But boy students of middle school recognized 'making clothes' in practice course too heavy. Second. It were from easy to difficult that the degrees of understanding on the educational contents of clothing & textiles recognized by elementary school students. Elementary school students understood both 'making cushion' and 'sewing machine theory and practice' difficult. Middle school students understood 'basic sewing for repairing clothes' and 'making clothes' difficult whereas high school students thought 'making pillow' and 'making bag' difficult. All students understood practice courses hard. Third, the degrees of interest showed from 'interest' level to 'not interest' level in case of elementary school students whereas 'interest' level in middle school students and 'common' in high school students. Fourth, the requirements of elementary, middle and high school students were in 'necessary' level to 'common' level. Editional contents such as 'learning sewing machine', 'making cushions'. 'making clothes', and 'making pillow-cover and bag' were low in the degrees of requirement. The correlationship between the amount of learning and the each level of understand, interest and requirement of students was indirect. On the other hand, Among the level of understand, interest and requirement were direct in case of high school students.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.742-748
• /
• 2009

In the meat industry, correct breed information in food labeling is required to assure meat quality. Genetic markers provide corroborating evidence to identify breed. We described the development of DNA markers to discriminate between Korean beef cattle (Hanwoo), Holstein, and mixed cow beefs. As most breeds are standardized for coat colour, the melanocortin 1 receptor (MC1R) gene, involved in the regulation of eu/pheomelanins synthesis, has been suggested as marker for breed traceability of products of animal origin. We also designed sex-determining region Y (SRY) gene specific primers for Y chromosome detection. In this study, fragments of MC1R gene and SRY gene were amplified by multiplex-PCR and subjected to digestion by MspA1I restriction endonuclease. Reaction products were analysised by denaturing high performance liquid chromatography (DHPLC). As a result, we identified 6 DHPLC peak types from MC1R gene and SRY gene analysis. DHPLC method showed more sensitive than RFLP method for DNA fragments analysis. Therefore, DHPLC method can apply to identify for Hanwoo, Holstein and mixed beef.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.761-778
• /
• 2017

The need of the underground space for the infrastructures in urban area is increasing, and especially the demand for shallow tunnels increased drastically. It is very important that the shallow tunnel in the urban area should fulfill not only its own safety conditions but also the safety condition for the adjacent structures and the surrounding sub-structure. Most of the studies on the behavior of shallow tunnels concentrated only on their behaviors due to the local deformation of the tunnel, such as tunnel crown or tunnel sidewall. However, few studies have been performed for the behavior of the shallow tunnel due to the deformation of the entire tunnel. Therefore, in this study the behavior of the surrounding ground and the stability caused by deformation of the whole tunnel were studied. For that purpose, model tests were performed for the various ground surface slopes and the cover depth of the tunnel. The model tunnel (width 300 mm, height 200 mm) could be simulationally deformed in the vertical and horizontal direction. The model ground was built by using carbon rods of three types (4 mm, 6 mm, 8 mm), in various surface slopes and cover depth of the tunnel. The subsidence of ground surface, the load on the tunnel crown and the sidewall, and the transferred load near tunnel were measured. As results, the ground surface subsided above the tunnel, and its amount decreased as the distance from the tunnel increased. The influence of a tunnel ceased in a certain distance from the tunnel. At the inclined ground surface, the wider subsidence has been occurred. The loads on the crown and the sidewall were clearly visible, but there was no effect of the surface slope at a certain depth. The load transfer on the adjacent ground was larger when the cover depth (on the horizontal surface) was lager. The higher the level (on the inclined surface), the wider and smaller it appeared. On the shallow tunnel under inclined surface, the transfer of the ambient load on the tunnel sidewall (low side) was clearly visible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.222-231
• /
• 2009

Statements of the problem: Over the past decades, conventional complete dentures were used for various patients although they have incomplete function. Overdentures using dental implants could help the improvement of denture function. Purpose: The purpose of this study was to compare the strains of abutment and bone on implant overdenture between splinted and unsplinted type of prosthesis. Additionally, the strain values of parallel placed implant model and unparallel placed implant model were compared. Material and methods: Two acrylic resin model were prepared and two implants were placed at the canine positions in each model. In the first model, two implant were placed parallel. In the second model, two implants were placed with 10 degree labiolingual divergence. Two types of abutment were connected to the fixtures alternatively. One was splint type of Hader bar, the other was unsplint type of ball abutment. Overdentures were fabricated with corresponding attachment systems and seated on abutments. Strains of abutments and labial bone simulants were measured with electric resistance strain gauges when static load from 100 N to 200 N were applied to overdentures. Results: 1. Splinted type of overdentures using bar and clip showed higher absolute strain values. But the strain was compressive and the load was shared by two implants(P<.05). 2. Unsplinted type overdentures using ball and O-ring showed low absolute strain values(P<.05). 3. Labially inclined implant showed higher tensile strain values in unsplinted type of prosthesis than in splinted type of prosthesis. Lingually inclined implant showed rather low strain values under load(P<.05). 4. Non parallel implant model showed higher absolute strain values than parallel placed implant model comprehensively(P<.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.389-403
• /
• 2008

In Angle's Class III malocclusion, which has higher incidence in Korean than Western, depressed midfacial profile with protruded lower lips and mandible may give rise to many functional, esthetic, psychological, social problems. Due to the different malocclusion incidence according to racial differences, many previous studies focused on the relationship between Class II malocclusion and nasal airway obstruction. Previous studies used lateral cephalography which has limitations of 2 dimensional image with projection error and identification error. Therefore, the purpose of this study was to analyze morphologic differences in the nasal airway between normal occlusion and Angle's Class III malocclusion patients using 3-dimensional facial computed tomography. Thirteen normal occlusion(7 men and 6 women) and sixteen skeletal Class III(7 men and 9 women) patients were selected and 3-dimensional facial computed tomography taking was performed. Comparison between two group in volume and sectional area of nasal airway were carried out. The results were followed. 1. In the comparison of absolute nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 2. In the comparison of relative nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 3. In the oropharyngeal space width on frontal and lateral view, the similar tendency was revealed between two groups. 4. In the lateral curvature of nasal airway, the similar tendency was revealed between two groups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.149-159
• /
• 2011

Restoring and replacing teeth with fixed prostheses commonly used in dental practice. Because of improper oral hygiene care and inaccurate laboratory procedure, complication of fixed prostheses was found in the mouth of patient. Although many efforts have been continually made to obtain the data of long term prognosis of fixed prostheses, it was difficult to do it. The purpose of this study was to evaluate the clinical status of fixed prostheses to improve the quality of dental care. In order to assess the clinical status of fixed prostheses, a total of 154 individuals (aged 22-82, 88 women and 66 men loaded with 578 unit of fixed prostheses, and 423 abutments) who visited the Department of Prosthodontics, Pusan National University Hospital, between January 2009 to December 2009 and removed old fixed prostheses were examined. The results of this study were as follows: 1. Length of service of fixed prostheses was $10.3{\pm}05.5$ years (mean), 10.0 years (median). 2. Location of fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was high in anterior-posterior combination region (mean:13.1, median:13.5) than anterior and posterior region. 3. Longevity of fixed prostheses made of metal was longest (mean:13.3, median:12.3). 4. Number of units in fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 5. Condition of opposing dentition was found to have statistically significant influence on longevity of fixed prostheses (P>.05). The fixed prostheses lasted longest when opposed by complete denture (mean:17.1, median:19.7), removable partial denture, fixed prosthesis and natural dentition trailing behind (P<.05) 6. Periodontal disease (37.5%), dental caries (19.0%), defective margin (18.4%) were frequent complications. In 33.1% of the cases, abutment state after removing fixed prostheses was needed to be extracted.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.137-152
• /
• 2008

This study examined the organization and operation of home economics curriculum of specialized middle school in the form of regular school among alternative schools and analyzed the perceptions of teachers and students about home economics class. Interviews were conducted with teachers of 6 specialized schools in order to determine the operations and teachers' perceptions of home economics education. Students' perceptions for home economics class were gathered through surveys with students from the 3 (of the original 6) schools that authorized the questionnaire survey. The final analysis utilized 205 student responses. Survey data were analyzed using the SPSS program. The results of the research were as follows: First, home economics education within specialized middle schools was mostly conducted according to the form of the technology-home economics curriculum, which is the national common basic curriculum. Compared to the 7th national curriculum, the class of technology-home economics curriculum in 4 schools occurred 1 hour less each week. Each school incorporated various specialized curricula related to home economics. Second, as for the operation of home economics education in specialized schools, most home economics classes were conducted by teachers who had majored (or minored) in home economics. Moreover, all but 1 school, which used self-made materials, used the national textbook and dealt with the entire content of the textbook. For teaching-learning methods and instructional media, various means were utilized. For evaluation methods, most schools based grades on paper-and-pencil tests(50-60%) and performance tests(40-50%). Third, among teachers' perceptions of home economics education, the meaning of home economics education was focused on practical help and the pursuit of home happiness; the purpose was to realize the happiness of students and their homes by applying these to actual living, and increase students' ability to see the world. In regards to difficulties in educational operations, most pointed out poor conditions of practice rooms. As for differences from general schools, most teachers mentioned the active communication with students. Fourth, through the home economics class, it was found that students perceived the goal of technology-home economics curricula as lower than average. Among students' perceptions about home economics class, most were negative. Perceptions about goal of technology-home economics curricula and home economics class also showed meaningful differences according to each school. Students of the school, which had more home economics class hours and specialized curricula related to home economics, perceived more positively. Also, students who were more satisfied with school and learned from a teacher who majored in home economics tended to perceive home economics class more positively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.