• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.270-279
• /
• 2012

This paper explores CT findings of a rabbit brain infection model injected with Escherichia coli and investigates the changes in Hounsfield unit (HU) of arterial blood over time. The brain infection model was produced by injecting E. coli $1{\times}10^7$ CFU/ml, 0.1 ml through the burr hole in the calvarium; 2~3 mm in depth from the dura mater, and contrast-enhanced CT, dynamic CT and arterial blood CT images were gained. It was found that various brain infections such as brain abscess, ventriculitis and meningitis. The CT image of brain abscess showed a typical pattern which the peripheral area was strongly contrast-enhanced while the center was weakly contrast-enhanced. The CT image of ventriculitis showed a strong contrast-enhancement along the lateral ventricle wall, and the CT image of meningitis showed a strong contrast-enhancement in the area between the telencephalon and the diencephalon. In dynamic CT images, the HU value of the infection core before injecting contrast medium was $31.01{\pm}3.55$. By 10 minutes after the injection, the value increased gradually to $40.36{\pm}3.76$. The HU value in the areas of the marginal rim where was hyper-enhanced showed $47.23{\pm}3.12$ before contrast injection, and it increased to $63.59{\pm}3.31$ about 45 seconds after the injection. In addition, the HU value of the normal brain tissue opposite to the E. coli. injected brain was $39.01{\pm}3.24$ before the injection, but after the contrast injection, the value increased to $49.01{\pm}4.29$ in about 30 seconds, and then it showed a gradual decline. In the arterial blood CT, the HU value before the contrast injection was $87.78{\pm}6.88$, and it increased dramatically between 10 to 30 seconds until it reached a maximum value of $749.13{\pm}98.48$. Then it fell sharply to $467.85{\pm}62.98$ between 30 seconds to 45 seconds and reached a plateau by 60 seconds. Later, the value showed a steady decrease and indicated $188.28{\pm}25.03$ at 20 minutes. Through this experiment, it was demonstrated that the brain infection model can be produced by injecting E. coli., and the characteristic of the infection model can be well observed with contrast-enhanced CT scan. The dynamic CT scan showed that the center of the infection was gradually contrast-enhanced, whereases the peripheral area was rapidly contrast-enhanced and then slowly decreased. As for arterial blood, it increased significantly between 10 seconds to 30 seconds after the contrast medium injection and decreased gradually after reaching a plateau.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2000

The purpose of this study was to compare the microleakage at the interface of cast post and tooth according to the type of cement. Forty anterior teeth with single root were used. The teeth were cut 2 mm coronal from the cementoeamel junction and chamfer finish line was made on 1 mm coronal from the cementoeamel junction. After the routine endodontic treatment, post space was prepared using #5.5 Parapost drill to a depth of 7 mm. After the pick up impression, core building was made to 3 mm of clinical crown with burnout wax, then post and core was cast with nonprecious metal. The teeth were divided into four groups of ten each. In Group I, post and core were cemented with Fleck's(Zinc phosphate cement) In Group II, post and core were cemented with Fuji I(Glass ionomer cement) In Group III, post and core were cemented with Superbond C & B(Composite resin cement) In Group IV, post and core were cemented with Panavia 21(Composite resin cement) All cemented teeth were stored in normal saline at $37^{\circ}C$ for 7 days and thermocycled from $5^{\circ}C$ to $55^{\circ}C$ for 500 cycles with a dwell time of 30 seconds. After thermocycling, teeth were immersed in 1% Basic fuchsin dye for 48 hours. All 40 teeth were then embedded in the epoxy resin and cut buccolingually with a cutting instrument. The degree of penetration of dye at interface was graded on a scale of 0 to 4 using a stereomicroscope at 25 to 40 times magnification. Through the findings of this study, the following conclusion were obtained. 1. All the groups showed the microleakage at the interface of cast post core and tooth. 2. Group I showed the highest microleakage score among the groups with a significant difference(p<0.05). 3. Group II showed higher microleakage score than Group III and Group IV with a significant difference(p<0.05). 4. Group IV showed the lowest microleakage score but there were no significant difference with Group III(p>0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.121-143
• /
• 2010

To investigate the effect of implant types and bone resorption on the fracture characteristics. 4 types of Osstem$^{(R)}$Implant were chosen and classified into external parallel, internal parallel, external taper, internal taper groups. Finite elements analysis was conducted with ANSYS Multi Physics software. Fatigue fracture test was performed by connecting the mold to the dynamic load fatigue testing machine with maximum load of 600N and minimum load of 60N. The entire fatigue test was performed with frequency of 14Hz and fractured specimens were observed with Hitachi S-3000 H scanning electron microscope. The results were as follows: 1. In the fatigue test of 2 mm exposed implants group, Tapered type and external connected type had higher fatigue life. 2. In the fatigue test of 4 mm exposed implants group, Parallel type and external connected types had higher fatigue life. 3. The fracture patterns of all 4 mm exposed implant system appeared transversely near the dead space of the fixture. With a exposing level of 2 mm, all internally connected implant systems were fractured transversely at the platform of fixture facing the abutment. but externally connected ones were fractured at the fillet of abutment body and hexa of fixture or near the dead space of the fixture. 4. Many fatigue striations were observed near the crack initiation and propagation sites. The cleavage with facet or dimple fractures appeared at the final fracture sites. 5. Effective stress of buccal site with compressive stress is higher than that of lingual site with tensile stress, and effective stress acting on the fixture is higher than that of the abutment screw. Also, maximum effective stress acting on the parallel type fixtures is higher. It is careful to use the internal type implant system in posterior area.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.125-137
• /
• 2009

There are many reports that these implant surface treatments may affect to cellular reaction in the surface of implant. This study was done by installing the 8 type implant with the variable surface treatment, used or developed, in the mandible of the mature dog to evaluate how the method of surface treatment of the implant can affect to the bone healing by analyzing histologically and histomorphometrically and find out bone healing appearance periodically after installing implant. By using the 8 type implants which have the different surface treatment, 72 implants were installed on the mandible of 9 mature dogs, and 3 dogs were sacrificed on every 2, 4, 8 weeks. After making bone fragment by cutting and managing, we analyzed histologically, then compared with BIC(Bone to implant contact) for the histomorphometrical analysis. In the result of histological analysis, there was large amount of bone formation in good state on the adjacent area of implant in the 2 weeks testing group. At 4 weeks, although there was general bone formation, the new bone was separated with the basal bone. At 8 weeks, the new bone became matured and connected tightly to the basal bone. There was no difference in the each surface of 8 implants. In the result of histomorphometrical analysis, 2 weeks group had considerably lower value than 4 and 8 weeks group, and there was no difference between 4 and 8 weeks group. There was no difference in the each surface treatment of implants.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.154-169
• /
• 2019

This study attempts to shed light on the nature and purpose of the small melon-shaped celadon ewer that was found in the Sinan shipwreck, focusing on the fact that it has the shape of a ewer, yet could not really have served as a tea or liquor utensil given its small size and unusual shape. We analyzed the shape-related characteristics of other melon-shaped celadon ewers as well as this one; checked the use of similar items unearthed in China and Japan; examined the relevant literature, materials, and paintings; and arrived at the following conclusion. First, it was found that the small melon-shaped celadon ewer was one of a type that was first made in the Southern Song Period in China and continued to be made until the Yuan Period. The artifact displays some differences from many similar relics found in the same shipwreck, particularly its spout, lid, and handle. Second, research on the tea ceremonies and types of liquors prevalent during the Song and Yuan Periods of China, as well as the appearance of this ewer, suggest that it was unsuitable for use as a liquor utensil. Third, we looked at the relevant literature records, paintings, and relics unearthed in China and Japan in an attempt to determine its actual purpose. It is well known that the literati had a deep affection for stationery items, particularly water droppers, which were made in a variety of shapes during the Song Period of China and thereafter. According to literature dating from the Song and Ming Periods, it appears that melon- or ewer-shaped water droppers were used. Certain paintings from the Ming Period depict a small ewer, along with a water dropper, as a stationery item. Looking at paintings dating from medieval Japan, small ewer-shaped objects do not figure among the tea and liquor utensils depicted, whereas kettles with handles and hot water bottles do. Objects known as yeonjeok (a water dropper) were included among the items said to have been made in pottery kilns during medieval Japan. However, a book on flower arrangement of Japan dating from the fifteenth century shows a small ewer, with flowers in it, among the stationery items placed on a desk. Based on this detail, it is concluded that the small melon-shaped celadon ewer from the Sinan shipwreck might have been used as a flower bottle as well as a stationery item.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.105-111
• /
• 1997

Root dynamics of a pine stand at Hongcheon, Korea was assayed with two kinds of soil samplers which had been tentatively manufactured to renovate the routine soil sampler, Oakfield soil sampler. Root-mixed soil samples were collected on December of 1995, March, May, August and December of 1996 within each randomly selected 8 plots. The amount of roots collected by the two kinds of soil samplers were not significantly different at the 5% level, which indicated that the renovated sampler was more desirable to be used since the sampler showed efficiencies in time for collection and quantification than the routine sampler. The quantities of total root in 100g soils were 469mg on December of 1995, and 352mg, 473mg, 461mg, 522mg on the following March, May, August and December, respectively. That is, total amount of roots showed the smallest in Spring and reached maximum in early Winter, although the differences were not significant among each season. By the way, the alive roots and dead roots showed significant differences among season, the alive roots took about 90% from May to early December while they decreased down to some 65% from late December to March. The roots of Pinus densiflora S. et Z. took about 46% of total roots although the species comprised 70% of crown layer, and the ratio of fine-roots of the species were higher than that of other species. By the way, the dynamics of total roots and that of alive roots were quite different. Thus, the study for root dynamics such as fine roots which take a major role for mycorrhizae formation or nutrient uptake should not be inferred from the data of total root dynamics but be investigated in detail by dividing them into each class.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.180-188
• /
• 2014

It is very important accurate diagnosis and quick treatment in cerebrovascular disease, i.e. stenosis or occlusion that could be caused by risk factors such as poor dietary habits, insufficient exercise, and obesity. Time-of-flight magnetic resonance angiography (TOF-MRA), it is well known as diagnostic method without using contrast agent for cerebrovascular disease, is the most representative and reliable technique. Nevertheless, it still has measurement errors (also known as overestimation) for length of stenosis and area of occlusion in celebral infarction that is built by accumulation and rupture of plaques generated by hemodynamic turbulence. The purpose of this study is to show clinical trial feasibility for 3D-SPACE T2, which is improved by using signal attenuation effects of fluid velocity, in diagnosis of cerebrovascular disease. To model angiostenosis, strictures of different proportions (40%, 50%, 60%, and 70%) and virtual blood stream (normal saline) of different velocities (0.19 ml/sec, 1.5 ml/sec, 2.1 ml/sec, and 2.6 ml/sec) by using dialysis were made. Cross-examinations were performed for 3D-SPACE T2 and TOF-MRA (16 times each). The accuracy of measurement for length of stenosis was compared in all experimental conditions. 3D-SPACE 2T has superiority in terms of accuracy for measurements of the length of stenosis, compared with TOF-MRA. Also, it is robust in fast blood stream and large stenosis than TOF-MRA. 3D-SPACE 2T will be promising technique to increase diagnosis accuracy in narrow complex lesions as like two cerebral small vessels with stenosis, created by hemodynamic turbulence.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.99-109
• /
• 2020

This study was conducted to improve the education method for improving perception awareness of the visually-impaired. 'Hear me later' was designed and implemented based on VR content that allows the visually-impaired experience in the eyes and environment. The main target is from middle and high school students to adolescents in their twenties. It is consisted of a student, the user's daily life with waking up at home in the morning, going to school, taking classes at school, and disembarking home late in the dark. In addition, 10 quests are placed on each map to induce users' participation and activity. These quests are a daily activity for non-disabled people, but it is an activity to experience uncomfortable activity for visually impaired people. In order to verify the effect of 'Hear me later', 8 participants in their early teens to early 20s' perception of visually impaired people was measured through pre and post evaluation of VR contents experience. In order to verify the effect of'Hear me later', 8 participants in their early teens to early 20s' perception of visually impaired people was measured through pre-post evaluation of VR experiences. As a result, it was found that in the post-evaluation of VR contents experience, the perception of the visually impaired was increased by 30% compared to the pre-evaluation. In particular, misunderstandings and changes in prejudice toward the visually impaired were remarkable. Through this study, the possibility of a VR-based disability experience education program that can freely construct space-time and maximize the experience was verified. In addition, it laid the foundation to expand it to various fields of improvement of the disabled.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.317-326
• /
• 2013

This study was to compare the cumulative survival rate of implant-supported fixed prostheses and to analyze association between risk factors and cumulative survival rate of implant-supported fixed prostheses. In order to assess the clinical status of implant-supported fixed prostheses, individuals who treated in the Department of Prosthodontics, Pusan National University Dental Hospital, between 2000 to 2007 were examined. The results of this study were as follows: 1. Length of service of implant-supported fixed prostheses was $6.6{\pm}32.0$ years (mean), 11.7 years (median). 2. Age and sex of patient was found to have no statistically significant influence on longevity of implant-supported fixed prostheses (P>.05). 3. Reason of tooth extraction wax found to have statistically significant influence on implant-supported fixed prostheses (P<.05). The longevity of fixed prostheses was low in tooth extraction case due to periodontal disease (median:9.0 years). 4. Location of implant-supported fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was low in molar region (median:8.8 years). 5. Number of units in implant-supported fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 6. Condition of opposing dentition was found to have no statistically significant influence on longevity of implant-supported fixed prostheses (P>.05). 7. Food impaction (40.5%), porcelain fracture (25.8%), screw loosening (23.6%) were frequent complications.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.81-95
• /
• 2006

The purpose of this study was to evaluate appropriateness of clothing & textiles as educational contents in practical arts or technology home economics in the 7th curriculum. The factors of appropriateness were the amounts of learning, the degrees of understanding, interest and requirement on the educational content recognized by elementary, middle and high school students. The data collected from evaluation sheets were analyzed by frequency analysis, t-test, crossing analysis using SPSSWIN 12.0 program. Results were as follows; First. more than 50% of elementary, middle and high school students were recognized the amounts of tearing of clothing & textiles proper. But boy students of middle school recognized 'making clothes' in practice course too heavy. Second. It were from easy to difficult that the degrees of understanding on the educational contents of clothing & textiles recognized by elementary school students. Elementary school students understood both 'making cushion' and 'sewing machine theory and practice' difficult. Middle school students understood 'basic sewing for repairing clothes' and 'making clothes' difficult whereas high school students thought 'making pillow' and 'making bag' difficult. All students understood practice courses hard. Third, the degrees of interest showed from 'interest' level to 'not interest' level in case of elementary school students whereas 'interest' level in middle school students and 'common' in high school students. Fourth, the requirements of elementary, middle and high school students were in 'necessary' level to 'common' level. Editional contents such as 'learning sewing machine', 'making cushions'. 'making clothes', and 'making pillow-cover and bag' were low in the degrees of requirement. The correlationship between the amount of learning and the each level of understand, interest and requirement of students was indirect. On the other hand, Among the level of understand, interest and requirement were direct in case of high school students.