• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.16-23
• /
• 2009

A 12b 10MS/s pipelined ADC with low DC gain amplifiers is presented. The pipelined ADC using a reference scaling technique is proposed to compensate the gain error in MDACs due to a low DC gain amplifier. To minimize the performance degradation of the ADC due to amplifier offset, the proposed offset trimming circuit is employed m the first-stage MDAC amplifier. Additional reset switches are used in all MDACs to reduce the memory effect caused by the low DC gain amplifier. The measured differential and integral non-linearities of the prototype ADC with 45dB DC gain amplifiers are less than 0.7LSB and 3.1LSB, respectively. The prototype ADC is fabricated in a $0.35{\mu}m$ CMOS process and achieves 62dB SNDR and 72dB SFDR with 2.4V supply and 10MHz sampling frequency while consuming 19mW power.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.829-831
• /
• 2012

본 논문은 차량 추돌 예방 레이더용 고 이득 저전력 저잡음 특성을 가진 24GHz 저잡음 증폭기(LNA)를 제안한다. 이러한 회로는 TSMC $0.13{\mu}m$ 혼성신호/고주파 CMOS 공정($f_T/f_{MAX}=120/140GHz$)으로 설계되어 있다. 증폭기의 전압 이득을 향상시키기 위해 2단 캐스코드 구조로 구성되어 있다. 제안한 저잡음 증폭기는 최근 발표된 연구결과에 비해 41dB의 가장 높은 전압이득과 3.7dB의 가장 낮은 잡음지수 및 2.8dBm의 가장 우수한 IIP3 특성을 각각 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.867-880
• /
• 1992

In this paper, a circuit design techniques for Improving the voltage gain of the GaAs MESFET single amplifier is presented. Also, various types of existing current mirror and proposed current mirror of new configuration are compared. To obtain the high differential mode gain and low common mode gain, bootstrap gain enhancement technique Is used and common mode feedback Is employed In the design of differential amplifier. The simulation results show that designed differential amplifier has differential gain of 57.66dB, unity gain frequency of 23.25GHz. Also, differential amplifier using common mode feedback with alternative negative current mirror has CMRR of 83.S8dB, stew rate of 3500 V /\ulcorners.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.915-918
• /
• 2003

본 논문에서는 높은 슬루율을 가지고 전압편차 (offset)보상 기능을 가지면서도 전력소모가 적은 고계조 TFT-LCD 데이터 드라이버 구동용 단일이득 연산증폭기(unit gain op-amp)의 바이어스 회로 및 구동 방법을 제안하였다. 제안한 단일이득 연산증폭기는 일반적으로 사용되고 있는 전압편차 보상기능을 가진 단일이득 연산증폭기에 adaptive bias기능을 추가한 것으로써, 기존 구조에 비해 50%이상의 소비 전력 절감 효율을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 2004

This paper describes the design of a two stage 1V power supply SiGe Low Noise Amplifier operating at 5.25㎓ for 802.lla wireless LAN application. The achieved performance includes a gain of 17㏈, noise figure of 2.7㏈, reflection coefficient of 15㏈, IIP3 of -5㏈m, and 1-㏈ compression point of -14㏈m. The total power consumption of the circuit was 7㎽ including 0.5㎽ for the bias circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.68-79
• /
• 1992

In the high speed analog system satellite communication system, video signal processing and optical fiber interface circuits, GaAs high gain operational amplifier is advantageous due to obtain a high gain because of its low transconductance and other drawbacks, such as low frequency dispersion and process variation. Therefore in this paper, a circuit techniques for improving the voltage gain for GaAs MESFET amplifier is presented. Also, various types of existing current mirror and current mirror proposed are compared.To obtain the high differential gain, bootstrap gain enhancement technique is used and common mode feedback is employed in differential amplifier.The simulation results show that gain is higher than that of basic amplifier about 18.6dB, and stability and frequency performance of differential amplifier are much improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.497-502
• /
• 2007

Broadband monolithic SiGe HBT variable gain amplifier with a feedforward configuration have been newly developed to improve bandwidth and dB-linearly controlled gain characteristics. The VGA has been implemented in a $0.35-{\mu}m$ BiCMOS process. The VGA achieves a dynamic gain-control range of 19.6 dB and a 3-dB bandwidth of 4 GHz ($4{\sim}8\;GHz$) with the control-voltage range from 0.6 to 2.6 V. The VGA produces a maximum gain of 9.3 dB at 6 GHz and a output power of -3 dBm at 8 GHz.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.177-180
• /
• 1998

높은 Q가 요구되는 고주파 신호 처리용 필터 설계에서는 흔히 SC 필터를 사용하고 있다. 처리하고자 하는 신호가 고주파수이고, 선택도 Q 값이 매우 높은 경우에는, SC 필터에 사용하는 증폭기의 성능이 빠르고, 직류 성분 이득이 커야만 한다. 이와 같은 속도와 이득이 요구됨에 따라 일반적인 범용 증폭기는 이득이 충분치 못하여 사용이 제한되고, 설사 범용 증폭기를 이용하여 필터를 구성하였다 해도 그 특성에 많은 제한을 줄 수밖에 없다. 또한 GaAS MESFET op amp의 경우, 최근의 논문에서도 60[dB] 이상의 이득이 제안된 바 없으므로, 필터 구성시 또 다른 설계 기술이 요구된다. 따라서 본 논문에서는 GaAS MESFET 능동 SC 적분기의 유한한 이득과 offset 전압을 보정한 새로운 구조의 적분기를 제안한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.54-61
• /
• 2016

A 6-Gbps single-ended receiver with a linear equalizer and a self-reference generator is proposed for a high-speed interface with the double data rate. The proposed single-ended receiver uses a common gate amplifier to increase a voltage gain for an input signal with low voltage level. The continuous-time linear equalizer which reduces gain to the low frequencies and achieves high-frequency peaking gain is implemented in the common gate amplifier. Furthermore, a self-reference generator, which is controlled with the resolution 2.1 mV using digital averaging method, is implemented to maximize the voltage margin by removing the offset noise of the common gate amplifier. The proposed single-ended receiver is designed using a 65-nm CMOS process with 1.2-V supply and consumes the power of 15 mW at the data rate of 6 Gbps. The peaking gain in the frequency of 3 GHz of the designed equalizer is more than 5 dB compared to that in the low frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1089-1095
• /
• 2005

This paper presents a new low-cost Built-In Self-Test (BIST) circuit for 50Hz low noise amplifier (LNA). The BIST circuit is designed for system-on-chip (SoC) transceiver environment. The proposed BIST circuit measures the LNA specifications such as input impedance, voltage gaih, noise figure, and input return loss all in a single SoC environment.