Proceedings of the Korean Institute of Surface Engineering Conference
/
2009.10a
/
pp.233-234
/
2009
증착된 silicon nitride (Sin) 박막의 수명 시간을 예측하는 신경망 모델을 개발하였다. SiN 박막은 플라즈마 화학기상 증착방식을 이용하여 증착되었다. 증착 공정은 통계적인 실험계획표를 이용하여 수행되었고, 신경망 모델의 예측 성능은 유전자 알고리즘을 이용하여 최적화하였다. 수명시간은 다른 박막특성 (굴절률, 증착률, 전하밀도)의 영향을 상당히 받았으며, 특히 굴절률과 전하밀도는 높은 증착률에서 증가시킬 때 수명시간을 최대화할 수 있었다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.13
no.5
/
pp.247-253
/
2003
In this study, a numerical analysis of the deposition of gallium arsenide from TMGa and arsine in a horizontal MOCVD reactor is performed to investigate the effect of inlet diffuser shape of reactor on the flow and deposition characteristics. The effects of two geometric parameters (diffuser angle, diffuser shape) on the growth rate, growth rate uniformity, flow uniformity and pressure loss are presented. As a results, it is found that the optimum linear diffuser angle is in the range of $50^{\circ}$∼$55^{\circ}$ and parabolic diffuser in the range of $40^{\circ}$∼$45^{\circ}$ from the viewpoint of growth rate uniformity, flow uniformity and average growth rate. It is also found that variation of diffuser angle has greater impact on growth rate uniformity than average growth rate particularly in parabolic diffuser.
We have investigated and analyzed the effects of the evaporation rate of MgO films on the MgO properties and the discharge characteristics of a plasma display panel(PDP). The MgO properties such as the crystal orientation, the surface roughness, the film structure, and cathode-luminescence (CL) spectra were inspected using XRD (X-ray diffraction), AFM(atomic force microscopy). And the discharging characteristics of the PDP such as the firing voltage, discharging current, and luminescence were measured using a vacuum chamber with oscilloscope (TDS 540C), current probe (TCP-312A), color meter (CS-100A) and etc. From the experiments results we confirmed the optimum evaporation rate at $5{\AA}/sec$, the MgO properties were shown to be strongly dependent on the evaporation rate, and the MgO properties had an effecton the optical and electrical characteristics. In other words, if the evaporation rates increase than $5{\AA}/sec$, the intensity of (200) orientation and cathode-luminescence (CL) spectra reduce, and the firing vlotage was increased. So the luminuous efficiency grows worse.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.309-309
/
2010
Silicon Nitride(SiN) 박막을 펄스드 플라즈마 응용화학기상법을 이용하여 저 소스전력의 $SiH_4-N_2$ 플라즈마에서 증착하였다. Duty ratio의 변화에 따른 이온에너지와 굴절률의 변화를 고찰하였다. 저이온에너지는 증착률과 강한 상관성을 보였다. 이온에너지 변수의 증착률에의 영향은 신경망 모델을 이용하여 고찰하였다.
In this paper, we controlled the deposition rate and reflective index with process conditions that are TCP power, gas flow ratio and bias for optical properties of $SiO_2$ thin film using TCP-CVD equipment. We obtained a excellent $SiO_2$ thin film which has a excellent uniformity (<1 [%]), deposition rate (0.28 [${\mu}m$/ min]) and reflective index (1.4610-1.4621) within 4" wafer with process conditions ($SiH_4:O_2$=50 : 100 [sccm], TCP power 1 [kW], bias 200 [W]) at [$300^{\circ}C$].
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.123-124
/
2011
플라즈마 화학적 기상 증착(plasma enhanced chemical vapor deposition)공정 중 NH3 gas flow rate, RF power, SiH4 gas flow rate을 고정시키고 N2O gas flow rate을 0 sccm부터 250 sccm까지 변화시키는 조건 하에 SiON박막을 증착한 후 그 투과율, 굴절률을 측정하고 분석하였다. N2O gas flow rate조건별 시편들은 증착율을 계산하여 350 nm 두께로 동일하게 SiON을 증착하였고, borofloat위에 SiON을 증착한 샘플은 투과율을, 실리콘기판 위에 SiON을 증착한 샘플로는 굴절률을 측정하였다. 투과율의 경우는 UV/Vis spectrometer를 이용해 633 nm, 1550 nm 두 가지 파장 대 모두에서 N2O gas flow rate이 가장 큰 250 sccm일 때 가장 높은 것을 알 수 있었고 N2O gas flow rate이 낮아질수록 투과율 또한 작아지는 경향을 보였다. 굴절률은 ellipsometer를 이용해 측정하였으며 633 nm 파장에서 N2O gas flow rate가 가장 낮은 0 sccm일 때 굴절률이 가장 큰 값을 가지고 N2O gas flow rate이 커질수록 굴절률은 지수함수적으로 감소되었다(n=1.837~1.494). 이는 N2O gas flow rate이 낮을수록 SiN계열에 커질수록 SiO2계열에 가까워지는 현상으로 이해된다. 이러한 실험분석 결과는 향후 실리카 도파로의 설계 및 최적화를 위해 사용될 수 있다.
We have studied the factors influencing the growth rate of TiN deposited from TDEAT using a bubbler. The growth rate of TiN was primarily dependent on the bubbler temperature, deposition temperature, gas delivery line conductance and carrier gases. In addition, the heating of the gas line through which carrier gas was delivered to the bubbler increased the growth rate slightly. Also heating of the delivery gas line between the bubbler and the chamber caused the increase of the growth rate of TiN, Showing the Arrehenius behaviour with the activation energy of 0.2 eV.
Proceedings of the Korean Vacuum Society Conference
/
1998.02a
/
pp.90-90
/
1998
전계 에미터 어레이(FEA)는 진공에서 전계률 인가하여 전극으로부터 전자률 방출시키는 전자원으로서, 마이크로파 소자 및 명판 디스플레이, 센서 둥에 이용된다 .. Transfer Mold 법 은 뾰족한 에미터 립과 게이트 절연막 및 게이트 전극 충올 형성한 후 유리와 같은 기판에 이전 시키는 방법으로, 이러한 방법은 Mold 형태 위에 코탱 충의 두께 조절과, 게이트와 립 높이 조절이 가능하며, 그리고 유리 기판 위에 접착하여 대면적의 평판 디스플레이를 제작 할 수 었다는 장점이 있다[1,2]. 본 연구에서는 일반적으로 사용되는 실리콘 기판올 습식 식 각하여 Mold률 제작하는 방법 대선에, 측벽 스페이스 구조률 이용한 새로운 방법의 Mold 형태률 이용하여 게이트률 가진 에마터 립올 제작하였다. 먼저 실리콘 기판 위에 산화막올 증착하고 그 위에 게이트 전극파 게이트 절연막을 LPCVD 방법으로 증착하여 구명 형태로 패터닝 한 후, BPSG(Boro Phospher Silicate Glass) 박막올 증착하여 고온에서 훌러 내려 뾰족한 형태의 주형(Mold)률 제작한 후 TiN율 증착하여 정전 접합(an여ic bon벼ng)이나 레 진(resine)둥으로 유리률 접합한 후 KOH 용액으로 실리콘 기판옵 뒷면부터 식각해 낸다. 그 다옴, 립과 게이트 위에 있는 절연막올 제거한 후 뾰족한 전계 에미터 어레이륭 제조하 였다. 자세한 제조 공정 및 제작된 에미터 립의 특성은 학회에서 발표될 예정이다.
Proceedings of the Optical Society of Korea Conference
/
1995.06a
/
pp.84-93
/
1995
간섭필터 제작시 고굴절률 박막으로 많이 사용되는 TiO2 박막을 이온빔 보조증착 방법으로 제작하여 광학적, 기계적 특성을 연구하였다. 보조증착용 이온초으로는 End-Hall 형 이온총을 자체제작하여 사용하였다. 증착속도, 이온빔의 전류빌도, 산소 주입량 등을 주요 증착변수로 하여 TiO2 박막의 광학상수와, 기계적 성질에 미치는 영향을 조사하였다. 그 결과 박막의 조밀도와 굴절률이 증가하여, 대기중에 노출시 파장이동이 없는 고품질의 간섭필터 제작에 사용할 수 있음을 알 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.164-164
/
2012
저진공 (>100 mTorr)에서 냉음극 변압기 전원 소스를 이용하여 플라즈마를 발생시키는 시스템을 개발하였다. 또한 이 장치를 이용하여 Tetraethylorthosilicate (TEOS)를 기화시켜 이산화규소 ($SiO_2$) 박막 증착 기술을 연구하였다. 공정 압력은 400~1,000 mT이었다. 증착된 박막의 박막 두께, 굴절률 등의 측정을 실시하였다. 결과를 요약하면, 플라즈마 공정 압력이 증가함에 따라 박막 증착 속도는 약 200~300 A/min이었다. 또한 전압이 1,100에서 2,100 V로 증가함에 따라 산화막의 증착 속도는 약 300에서 40 nm/min으로 증가하였다. TEOS만을 사용하였을 때 굴절률은 약 1.5~1.6정도였다. 그러나 TEOS에 산소를 추가하면 자연 산화막의 굴절률인 1.46을 쉽게 얻을 수 있었다. 초기 연구 결과를 정리하면 냉음극 변압기 플라즈마 장치는 향후 실용적인 산화막 플라즈마 증착 연구 장치로 사용될 수 있을 것으로 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.