• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.4
• /
• pp.18-31
• /
• 2024

This study examines the inscription trends and characteristics of 121 cultural landscapes inscribed on the UNESCO World Heritage List to gain a comprehensive understanding of their inherent values and attributes. By employing a dual methodology involving descriptive statistical analysis and in-depth case studies, this research investigates the geographical distribution, temporal inscription patterns, selection criteria, and typologies of these landscapes. The data for this study were collected from official documents and databases available on the UNESCO World Heritage Center website, ensuring the reliability and authenticity of the information. The analysis reveals that cultural landscapes are predominantly concentrated in Europe and Asia, with a steady increase in inscriptions since 1992. These landscapes are primarily recognized for their uniqueness in reflecting human-nature interactions, as well as the importance of traditional culture and land-use practices, resulting in their inscription mainly under criteria (iv), (iii), (v), and (ii). Furthermore, cultural landscapes can be broadly categorized into three types: designed landscapes, organically evolved landscapes, and associative landscapes. Among these, organically evolved landscapes, formed through long-term interactions between human activities such as agriculture and industry and the natural environment, constitute a significant proportion. These findings suggest that UNESCO World Heritage cultural landscapes possess a complex value system encompassing nature and culture, tangible and intangible elements, and material and non-material aspects. This necessitates a fundamental shift in the perception and preservation approaches to cultural heritage, requiring an integrated approach that emphasizes the overall context rather than individual elements and focuses on the dynamic process of landscape evolution itself. Moreover, cultural landscapes have the potential to contribute to sustainable development models by fostering regional identity, strengthening community resilience, and promoting sustainable economic growth. Therefore, the preservation and management of cultural landscapes require a perspective that holistically views the dynamic evolution process of the landscape and a governance system based on the active participation of local communities and stakeholders. This study contributes to enhancing the in-depth understanding of the characteristics and values of cultural landscapes and provides a foundation for the selection and management of future cultural landscape heritage sites.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.211-226
• /
• 2023

As we transition into the post-COVID era, economic activities that were stagnant are regaining momentum. In particular, there is a growing trend of technology entrepreneurship driven by the opportunities of digital transformation in the Fourth Industrial Revolution. However, entrepreneurship education content is struggling to keep up with the rapid pace of technological change. This study aims to emphasize the importance of entrepreneurship mentoring as a crucial component of entrepreneurship education content that requires adaptation and advancement due to the increasing demand for technology entrepreneurship. This study redefines startup mentoring, which is differentiated from general mentoring, at the present time when the demand for startups, which increases with the declining employment rate, increases, and the development of quality startup education contents and securing professional startup mentors are required. According to the start-up stage, it is divided into preliminary entrepreneurs and early entrepreneurs, and the effect of entrepreneurship knowledge and self-efficacy among start-up mentoring functions on entrepreneurial will and mentoring satisfaction is improved by empirically researching the effects of start-up mentoring functions in the case of initial entrepreneurs as a moderating effect. To confirm the importance of entrepreneurship mentoring effect for. To this end, among the mentoring functions, entrepreneurship knowledge and self-efficacy were set as independent variables, and entrepreneurial will and mentoring satisfaction were set as dependent variables. The research model was designed and hypotheses were established. In addition, empirical analysis was conducted by conducting a questionnaire survey on trainees who received entrepreneurship mentoring education at ICCE Startup School and Opus Startup School. To summarize the results of the empirical analysis, first, among the entrepreneurship mentoring functions, entrepreneurship knowledge and self-efficacy were analyzed to have a significant positive (+) effect on entrepreneurial will. Second, among the entrepreneurship mentoring functions, entrepreneurship knowledge and self-efficacy were analyzed to have a significant positive (+) effect on mentoring satisfaction. Third, it was analyzed that entrepreneurship had no significant moderating effect on entrepreneurial knowledge and entrepreneurial will. Fourth, it was analyzed that entrepreneurship had no significant moderating effect on mentoring satisfaction. Fifth, it was found that entrepreneurship had a significant moderating effect between self-efficacy and will to start a business. As a result of the research analysis, the first implication is that the mentoring function in start-up education is analyzed to produce meaningful results for both the initial entrepreneurs and the prospective entrepreneurs in the will to start a business and satisfaction. . Second, it was analyzed that there was no significant relationship between whether a business was started and the mentoring function and effect. However, it was analyzed that the will to start a business through improvement of self-efficacy through mentoring was significantly related to whether or not to start a business. turned out to be helpful. Many start-up education programs currently conducted in Korea educate both early-stage entrepreneurs and prospective entrepreneurs at the same time for reasons such as convenience. However, through the results of this study, even in small-scale entrepreneurship mentoring, it is suggested that customized mentoring through detailed classification such as whether the mentee has started a business can be a method for successful entrepreneurship and high satisfaction of the mentee.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.325-332
• /
• 1999

A manure management plan is important for all dairy operations. This experiment was conducted to determine the effect of different nitrogen(N) application rates of liquid cattle manure on the forage quality, N recovery, and total forage yields of corn-oats cropping system and soil properties at the National Livestock Research Institute, RDA, Suweon in 1997. Eight treatments consisting of no fertilizer, chemical fertilizer $320kg\;N\;ha^{-1}$ as urea, the continuous applications of 320, 640 and $960kg\;N\;ha^{-1}$ as liquid cattle manure(LCM), the residual effects of 200, 400 and $600kg\;N\;ha^{-1}$ as liquid cattle manure were arranged in a randomized complete block design with three replications. Mean plant height of fall sown oats was 70 and 61cm at the continuous application and the residual effect plots, respectively. Mean dry matter percent of fall sown oats at the residual effect plots was higher by 0.9% than that of oats at the continuous application plots, but there were no differences among all treatments. Mean crude protein(CP), acid detergent fiber(ADF), and neutral detergent fiber (NDF) contents of fall sown oats at the continuous application plots were higher by 1.0, 1.6, and 3.1%, respectively, than those of the residual effect plots. Also, there were significant differences among treatments (P<0.05). Total forage dry matter yields of corn and oats cropping system were ranged from 11,365 to $25,668kg\;ha^{-1}$ among the treatments. The yield was orderly ranked as LCM $960kg\;N\;ha^{-1}$ > LCM $600kg\;N\;ha^{-1}$ > LCM $640kg\;N\;ha^{-1}$ > LCM $400kg\;N\;ha^{-1}$ (P<0.05). Compared with the control, manurial value(MV) was 158 and 139% for the plot of the LCM $960kg\;N\;ha^{-1}$ and that of the LCM $600kg\;N\;ha^{-1}$, respectively. N recovery percent of fall sown oats was the highest at the plot of the LCM $200kg\;N\;ha^{-1}$ by 50%, and then was higher in order of the LCM $400kg\;N\;ha^{-1}$, LCM $600kg\;N\;ha^{-1}$, and LCM $320kg\;N\;ha^{-1}$. Contents of exchangeable cation in the soil of the residual effect plots was higher than that of the continuous application plots. These results suggest that the LCM $600kg\;N\;ha^{-1}$ may be the most effective in total forage dry matter yields, manurial value, N recovery, and utilizing liquid manure N under the corn and oats double cropping system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.1-8
• /
• 2017

As the IT environment becomes more sophisticated, various threats and their associated serious risks are increasing. Threats such as DDoS attacks, malware, worms, and APT attacks can be a very serious risk to enterprises and must be efficiently managed in a timely manner. Therefore, the government has designated the important system as the main information communication infrastructure in consideration of the impact on the national security and the economic society according to the 'Information and Communication Infrastructure Protection Act', which, in particular, protects the main information communication infrastructure from cyber infringement. In addition, it conducts management supervision such as analysis and evaluation of vulnerability, establishment of protection measures, implementation of protection measures, and distribution of technology guides. Even now, security consulting is proceeding on the basis of 'Guidance for Evaluation of Technical Vulnerability Analysis of Major IT Infrastructure Facilities'. There are neglected inspection items in the applied items, and the vulnerability of APT attack, malicious code, and risk are present issues that are neglected. In order to eliminate the actual security risk, the security manager has arranged the inspection and ordered the special company. In other words, it is difficult to check against current hacking or vulnerability through current system vulnerability checking method. In this paper, we propose an efficient method for extracting diagnostic data regarding the necessity of upgrading system vulnerability check, a check item that does not reflect recent trends, a technical check case for latest intrusion technique, a related study on security threats and requirements. Based on this, we investigate the security vulnerability management system and vulnerability list of domestic and foreign countries, propose effective security vulnerability management system, and propose further study to improve overseas vulnerability diagnosis items so that they can be related to domestic vulnerability items.