• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6022-6026
• /
• 2012

This article presents a band-stop filter (BSF) by using a periodic structure property of frequency selective surfaces (FSSs) embedded in a microstrip transmission line. The proposed BSF is designed with FSS unit cells modifying the cross-loop slots. The BSF is interpreted with an equivalent circuit model and a dispersion diagram. The center frequency (fo) of the BSF is 6.6GHz. Proposed filter increases the number of unit cell. As a result, 3dB bandwidth is wider and insertion loss is reduced. Also, Facbricated BSF exhibits uniplanar geometry, simple fabrication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.530-534
• /
• 2002

In the thesis, For improving the Stability of VCHRO(Voltage Controlled Hair-pin Resonator Oscillator) the new structure using the parallel feedback of the second harmonic is proposed for self-phase locking effect. This module is composed of wilkinson divider, frequency doubler, directional coupler, and bandpass filter using a hair-pin resonator, which are integrated into miniaturized hybrid circuit. The module exhibits output power of 2.5 dBm at 19.5 GHz, -29.83 dBc fundamental frequency suppression and -76.52 dBc/Hz phase noise at 10 kHz offset frequency from carrier of center frequency 19.5 GHz.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1515-1520
• /
• 2004

In this paper, a new continuous-time bandpass active filter for lour-voltage applications is proposed. The active filter is composed of the CMOS complementary cascode circuit which can increase trans-conductance of an active element. These results are verified through the 0.25$\mu\textrm{m}$ CMOS n-well parameter hspice simulation. As a result, the gain and the unity gain frequency is 42dB and 200MHz respectively in the integrator. Additionally, center frequency of the bandpass active filter is 747kHz. And also bandwidth of the filter is 649kHz on 2V supply voltage.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.31-36
• /
• 1998

In this paper, Image Rejection Interdigital Filter(IRIF) for 5.8GHz wireless LAN was designed and implemented. When the input signal is -30dBm in the 4~8㎓ frequency band, the insertion loss including all kinds of loss is 6.3dB in the center frequency 5.775GHz. Therefore, it was showed practically insertion loss of about -3.3dB. Especially, image signal rejection is about -l7dB in the image frequency 6.475GHz. and skirt characteristics of the high frequency band is very excellent. Therefore, it was confirmed that the proposed IRIF is suitable for RF image signal rejection in the 5.8GHz wireless LAN system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.715-722
• /
• 2000

In this paper, the PLDRO is designed and implemented for X-band. It is comprised of tunable high Q resonator with a varactor diode for frequency tuning, loop filter and a 1/8 prescaler which up to 10GHz. Also, it is implemented a TCXO and a VCO signal into the phase detector and achieved a highly stable signal source. From the measurement, the designed PLDRO has the output power of 2.5dBm at 8GHz and phase noise of -64.33dBc at 10KHz offset from carrier. Its characteristic is 26 dBc. This PLDRO has much better temperature stability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.74-80
• /
• 2009

This paper describes a $2{\sim}6GHz$ CMOS frequency synthesizer that employs only one LC-tank voltage controlled oscillator (VCO). For wide-band operation, optimized LO signal generator is used. The LC-tank VCO oscillating in $6{\sim}8GHz$ provides the required LO frequency by dividing and mixing the VCO output clocks appropriately. The frequency synthesizer is based on a fractional-N phase locked loop (PLL) employing third-order 1-1-1 MASH type sigma-delta modulator. Implemented in a $0.18{\mu}m$ CMOS technology, the frequency synthesizer occupies the area of $0.92mm^2$ with of-chip loop filter and consumes 36mW from a 1.8V supply. The PLL is completed in less than $8{\mu}s$. The phase noise is -110dBC/Hz at 1MHz offset from the carrier.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.362-367
• /
• 2005

Ultrasonic backward radiation profile is frequency-dependent when the incident region has deptional gradient of acoustical properties or multi-layers. Until now, we have measured the profiles of principal frequencies of an used transducers so that it was not easy to characterize the frequency dependence of the SAW(surface acoustic wave) from the backward radiation profile. We tried to measure the spectral backward radiation profiles using DFP(digital filer package) in a Lecroy DSO(digital storage oscilloscope). The measured spectral profiles showed that the steel specimen of #1200 surface treatment have 2% SAW velocity dispersion of the loaded case and the severly rusty steel specimen have the very big changes in the shape and pattern of the spectral profile. It is concluded that the spectral backward radiation profiles could be very effective tool to evaluate the frequency dependence of surface area.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2164-2166
• /
• 2004

QFT는 플랜트의 변동을 고려하여 주파수 영역에서 설계하는 제어기법으로 파라미터의 변화 및 외란에 강인한 제어기 설계에 적합한 제어기 설계 방법이다. 본 논문에서는 종축 방향의 항공기 무게 중심이 변화하는 범위에 대하여 요구 비행성(Flying Quality)을 만족하도록 하는 강인한 QFT 제어기의 설계기법을 제안하였다. 시뮬레이션을 통하여 제안한 QFT 제어기가 무게중심의 변화 범위에서 주어진 비행성능을 만족함을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.823-827
• /
• 2001

인체에 영향을 미치는 진동을 분류하는데 가장 중요한 기준은 주파수이다. ISO의 인체진동관련 규격에서는 인체에 영향을 미치는 거동을 저주파수 운동(0.63Hz이하)과 진동(1~80Hz)으로 나누고 있다［1］. ISO 2631에서는 주파수별로 인체에 미치는 영향을 그림1과 같이 가중치로 정의하여 제시하고 있다. 저주파수 영역의 운동은 외부 거동(주로 수평방향)에 대하여 자세를 유지하기 위해 힘Tm게 되므로 물리적인 피로감을 줄 뿐만 아니라 'Motion sickness'란 증상을 유발한다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.637-640
• /
• 2003

무선인식기술은 제품에 부착된 칩의 정보를 주파수를 이용해 읽고 쓸 수 있는 무선주파수인식으로 사람, 상품, 차량 등을 비 접촉으로 인식하는 기술이다. 이러한 무선인식관련 기술의 급격한 발달로 RFID(Radio Frequency IDentification) 시스템이 기존 바코드 중심의 상품식별시스템을 대체할 것으로 판단되므로 이에 대한 무선인식 구성과 기능, 적용분야, 표준화 등을 검토하기로 한다.