• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.109-109
• /
• 2019

2018년 5월 전라북도 남원군에서 재배하여 수확 후 $0^{\circ}C$ 저장고에서 예냉을 마친 산마늘을 사용하였으며 외 포장 상자는 골판지로 구성된 통기공이 없는 골판지상자 1kg용을 사용하였다. 골판지상자와 함께 내부 포장으로 사용하기 위한 내포장 필름은 $20{\mu}m$ 두께의 HDPE으로 된 필름 봉지, 흡습종이는 파라핀왁스 코팅 종이($32{\times}35cm$, 태영산업)를 이용하여 조합 처리하고 국내에서 개발한 기능성 필름2종으로 포장처리는 총 4가지로 (1) PE(관행) (2) PE+흡습지 (3) 기능성필름1($30{\times}58cm$, 기능성물질 1%+40,000OTR, 제조사: 신영산업사) (4) 기능성필름2($30{\times}58cm$, Key fresh, 제조사: 씨앤케이프로팩(주)) 각 처리당 1kg 씩의 산마늘 잎을 포장하였다. 실험은 포장 처리 후 상온상태로 전북 완주군 실험실까지 수송하였으며 실험실 도착 후 상온 실험실에 두고 2일과 6일 후 중량감소율, 색도, 엽록소, 손실률 및 종합선도 등 품질특성 변화를 조사하였고 각 포장방법별 온도와 상대습도 변화를 보기 위하여 산마늘 잎이 포장된 상자 내부 중앙 부분에 디지털온습도기록계(SP-2000-20R)를 고정한 후 측정하였다. 대조구로 사용한 PE필름 단용으로 포장한 산마늘 잎은 상온저장 6일 경과 후 중량 소율이 1.7%, PE필름+신선지 처리는 1.0%, 기능성필름1과 기능성필름2는 거의 중량감소가 없어 1% 미만의 변화를 보였다. 산마늘 잎의 SPAD 값에 의한 엽록소 수치와 색도를 측정한 명도($L^*$)와 Hue angle 값의 변화는 기능성필름1과 기능성필름2가 유사하게 높게 유지되었고 반면에 PE필름은 저장 2일 후 부터 값이 감소하기 시작하여 6일 후 크게 감소하였다. 저장 6일 후 기능성필름1과 기능성필름2가 외관품위에서 높은 평가를 받아 상품성을 유지하고 있었으나 PE필름 처리와 PE필름+흡습지 처리는 상품성을 상실한 상태였다. 이러한 경향은 건전율에 있어서도 유사하였으며 기능성필름1(다공성 나노 물질이 혼입되어 있으며 산소투과율을 $40,000cc/m2{\cdot}day{\cdot}atm$으로 조성한 필름)이 상온저장 6일 후 상품성을 유지하는 건전율이 83%로 가장 높았다.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.424-430
• /
• 2012

In this study, laccase activity, rate of weight loss and degree of lignin degradation of pine wood chips were determined during the liquid and solid state incubation with Polyporus brumalis. The results showed that laccase enzyme activity at untreated wood chip was gradually decreased after 20 days, but enzyme activity with wood chip treatment showed 10 times higher than untreated ones at 60 incubation days. Rate of weight losses of pine chip and rate of lignin loss were 23.4% and 6.3% by P. brumalis during 80 incubation days. Gene expression of pblac1 from P. brumalis was 3 times increased under pine chip treatment at 40 incubation days. Consequently, laccase activity of white rot fungi, P. brumalis, was increased at incubation with wood chip and pblac1 gene was important factor of lignin degradation. Therefore, to regulate lignin degrading enzyme gene expression by using the tools of biotechnology will be able to develop superior strains and it will be useful for pretreatment of lignocellulosic biomass at bioethanol production.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.511-526
• /
• 2018

Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.857-863
• /
• 2012

This study prepares dried sweet pumpkins to optimize pretreatment conditions of blanching, steaming and microwave heating and to investigate the quality characteristic of each method. The sweet pumpkin blanching treatment of moisture content decreased gradually with increasing temperature, and soluble solids, and weight loss was increased. Color temperature is lower, and a higher value of L value and b value increased. As for the sweet pumpkin steaming treatment of moisture content, it was observed that the longer the steaming time was decreased, sugar content was increased. Change of color in the L value, the longer the steaming time a and b values. Also, as for the microwave treatment of the sweet pumpkin, the longer the time the moisture content decreased, it slightly increased soluble solids and weight loss. Blanching showed the lowest hardness of texture, followed by steaming, and microwaves, in order. Penetration per 20 hours per type was determined by sensory evaluation of sugar, and sugar:fructose(1:2)ratio were higher in the composition.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.557-563
• /
• 2022

In order to measure the allergen penetration of micropore fabrics, it is necessary to develop a convenient and appropriate experimental method for measuring a pore size of micropore fabrics. In this study, a simple and economical experimental apparatus was developed for the analysis of the pore size of micropore fabrics by measuring the weight reduction rate. In addition, the allergen blocking properties was evaluated by measuring the pore sizes of various fabrics. According to this study, the size of the pores of the microporous fabric could be obtained by measuring the weight reduction rates. In addition, higher weight reduction rate was obtained as the suction pressure passing through the particle permeation device decreased and the suction time was increased. It is expected that the developed experimental method and apparatus can be utilized as an experimental standard for quality control methods to verify the effectiveness of micropore fabrics used for house dust mite blocking bedding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.373-380
• /
• 2020

A valve product can be over-designed or too heavy. Finite element analysis was performed using ANSYS for two and three-dimensional ball valve models, and the ball weight was reduced by optimization within the allowable design criteria. The ball is structurally safe according to the computed stress values, which are within the material's admissible stress. The weight was reduced by about 22%, and the structural safety factor was 1.25. The structural safety of the seat insert and ring, which are used to prevent leakage, was confirmed through finite element analysis. It is shown that the two-dimensional analysis can result in similar values to the three-dimensional analysis for the axisymmetric structure. The redesign of the valve is not included in the results since such changes require a whole new design process, including all valve components.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.91-98
• /
• 1999

Plums (Prunus salicina L.) were coated with calcium-treated methylcellulose (CaMC) and hydroxypropylmethylcellulose-15 (CaHPMC-15). Respiration rate, weight loss, pH and titratable acidity, texture, and sensory characteristics were compared during 8-day storage period at $30^{\circ}C$. Weight loss and respiration rate of plums coated with CaMC and CaHPMC-15 were lower than those of control plums during storage while pH increased and titratable acidity slowly deceased during storage. Mechanical firmness was significantly deceased during storage, in which CaMC and CaHPMC-15-coated plums were harder than the control. Amount of soluble pectin, and pectin esterase and polygalacturonase activities as the markers of softening commonly increased with storage, but both CaMC and CaHPMC-15-coated plums were not found those increases. Sensory evaluation showed that the flesh softening of plums decreased during storage, and that in the coated plums exhibited the harder flesh. In conclusion, introduction of CaMC and CaHPMC-15 coatings on plums decreased respiration rate and contributed to delay of flesh softening, and the significant difference in postharvest storage quality of the both plums were not found between CaMC and CaHPMC-15 coatings.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.144-152
• /
• 1998

To obtain white rot fungi which have selective delignification capacity and can be used in biopulping processes, 94 different wood rotting fungi were screened and the capabilities of selected species were evaluated on deciduous and coniferous wood blocks. White rot fungi, first of all, were selected by simple enzyme tests, i.e., cellulase activity test; phenol oxidase activity test; laccase and peroxidase activity test. Most organisms that gave a positive Bavendamm gave a strongly positive laccase test with syringaldazine whereas most of those that gave a negative Bavendamm test also negative test for laccase and peroxidase, even if some exceptions were noted. Wood decay experiement were carried out to select fungal species with selective lignin-degrading ability by inoculating selected fungi to both wood blocks of Populus tomentiglandulosa and Larix leptolepis. After 12 weeks of incubation, weight losses, lignin losses, and morphological characteristics of the decayed wood were investigated. Almost all fungi tested caused 2 or more times of weight losses in P. tomentiglandulosa than in L. leptolepis, while no weight losses were detected from the un-inoculated wood blocks. Ceriporiopsis subvermispora and Phanerochaete chrysosporium were the best delignifiers for both hardwood and softwood. P. chrysosporium, however, was less effective than C. subvermispora. Bjerkandera adusta and two unidentified spp. caused delignification for only P. tomentiglandulosa. B. adusta caused simultaneous rot of all cell wall components, resulted in thinning of the secondary cell wall layers. Other fungi caused selective delignification resulting in the removal of lignin from middle lamella and separation of cells from each other.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.939-944
• /
• 2016

The aim of this study was to establish an optimum blanching condition for outer cabbage leaves to increase utilization of the byproduct. Outer leaves of Kimchi cabbages were cut to size ($4{\times}4cm$) and blanched at 80, 90, $100^{\circ}C$ for 1, 3, and 5 min. Subsequently, weight loss, pH, total bacteria, coliform and texture properties were investigated. Sensory evaluation of a ready-to-cook soup prepared from blanched outer leaves was investigated to determine whether the quality of the blanched outer leaves was acceptable. Both weight loss and pH of outer leaves of Kimchi cabbage were increased by blanching. Compared to raw samples, total bacterial counts decreased and coliform bacteria were not detected. The hardness of raw leaf samples was $1.5kg{\cdot}force$ (N). Sample hardness was 18.7~21.7% lower after blanching for 3 min and 34.8~36.7% after blanching for 5 min. Sensory evaluation of outer leaves blanched at $100^{\circ}C$ for 5 min revealed significant differences from the other treatments (p<0.05). In addition, sensory evaluation scores for texture and appearance of outer leaves blanched at $100^{\circ}C$ for 3 min were higher than those for commercially available products. The results of this study indicate that blanching can be effective for developing a food product from the outer leaves of Kimchi cabbage.

• Journal of Mushroom
• /
• v.4 no.1
• /
• pp.39-42
• /
• 2006

Cauliflower mushroom(Sparassis crispa) contains much amount of ${\beta}$-glucan, which make lots of farmer want to cultivate the mushroom. Since a practical cultivation method is not provided yet, the mushroom is considered as a difficult crop to deal with. In this study, we tried to develope a simple method to cultivate the mushroom by use of coniferous sawdust-based medium with wheat flour and molasses. There was no significant differences between the sawdust spawn and the liquid spawn for the mycelial growth of the mushroom. The cold shock in $4^{\circ}C$ for a day was thought to be the best way to seduce primordium formation. The sawdust medium of Pseudotsuga menziesii mixed with wheat flour, corn chip, cottonseed meal and 10% molasses was showed the best yield with 41% followed by that of Larix leptolepis mixed with the same additives with 37% of yield. There was good relations between the fruit-body production and the weight loss of the sawdust substrate.