• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.4
• /
• pp.110-126
• /
• 2024

Several studies have focused on developing the safest and most efficient path from the current location to the available parking area for vehicles entering a parking lot. In the present study, the parking lot structure and parking environment such as the lane width, width, and length of the parking space, were vaired by referring to the actual parking lot with vertical and horizontal parking. An automatic parking path planning model was proposed by collecting path data by various setting angles and environments such as a starting point and an arrival point, by putting the collected data into a deep learning model. The existing algorithm(Hybrid A-star, Reeds-Shepp Curve) and the deep learning model generate similar paths without colliding with obstacles. The distance and the consumption time were reduced by 0.59% and 0.61%, respectively, resulting in more efficient paths. The switching point could be decreased from 1.3 to 1.2 to reduce driver fatigue by maximizing straight and backward movement. Finally, the path generation time is reduced by 42.76%, enabling efficient and rapid path generation, which can be used to create a path plan for autonomous parking during autonomous driving in the future, and it is expected to be used to create a path for parking robots that move according to vehicle construction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.307-312
• /
• 2013

The interest in reducing the emissions and increasing the fuel economy of ICE vehicles has prompted research on hybrid vehicles, which come in the series, parallel, and power-split types. This study focuses on the series-type hybrid electric vehicle, which has a simple structure. Because each component of a series hybrid vehicle is larger than the corresponding component of the parallel type, the sizing of the vehicle is very important. This is because the performance may be greater or less than what is required. Thus, in this research, the optimal fuel economy was determined and simulated in a real-world system. The optimal sizing was achieved based on the motor, engine/generator, and battery for 13 cycles, where DP was used. The model was developed using ASCET or a Simulink-Amisim Co-simulation platform on the rapid controller prototype, ES-1000.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.126-136
• /
• 2014

In the Advanced Driver Assistance Systems (ADAS) of smart vehicle and Intelligent Transportation System (ITS) for to detect the boundary of lane is being studied a lot of Hough Transform. This method detects correctly recognition the lane. But recognition rate can fall due to detecting straight lines outside of the lane. In order to solve this problems, this paper proposed an algorithm to recognize the lane boundaries and the accumulator cells in Hough space. Based on proposed algorithm, we develop application for Android was developed by H/W verification. Users of smart phone devices could use lane detection and lane departure warning systems for driver's safety whenever and wherever. Software verification using the OpenCV showed efficiency recognition correct rate of 93.8% and hardware real-time verification for an application development in the Android phone showed recognition correct rate of 70%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.599-608
• /
• 2017

Cracks on the asphalt road surface can affect the speed of the car, the consumption of fuel, the ride quality of the road, and the durability of the road surface. Such cracks in roads can lead to very dangerous consequences for long periods of time. To prevent such risks, it is necessary to identify cracks and take appropriate action. It takes too much time and money to do it. Also, it is difficult to use expensive laser equipment vehicles for initial cost and equipment operation. In this paper, we propose an effective detection method of road surface defect using ROI (Region of Interest) setting and cany edge detection method using UAV image. The results of this study can be presented as efficient method for road surface flaw detection and maintenance using UAV. In addition, it can be used to detect cracks such as various buildings and civil engineering structures such as buildings, outer walls, large-scale storage tanks other than roads, and cost reduction effect can be expected.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.59-70
• /
• 2009

This study presents a novel traffic information system which is capable of detecting unsafe traffic events leading to accident occurrence and providing warning information to drivers for safer driving. Unsafe traffic events are captured by a vehicle image processing-based detection system in real time. Surrogate safety measures (SSM) representing quantitative accident potentials were derived, and further utilized to develop a data processing algorithm and analysis techniques in the proposed system. This study also defined 'emergency warning area' and 'general warning area' for more effective provision of warning information. In addition, methodologies for determining thresholds to trigger warning information were presented. Technical issues and further studies to fully exploit the benefits of the proposed system were discussed. It is expected that the proposed system would be effective for better management of traffic flow to prevent traffic accidents on freeways.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.59-66
• /
• 2014

PURPOSES : This study is to predict the Sound Pressure Level(SPL) obtained from the Noble Close ProXimity(NCPX) method by using the Extended Kalman Filter Algorithm employing the taylor series and Linear Regression Analysis based on the least square method. The objective of utilizing EKF Algorithm is to consider stochastically the effect of error because the Regression analysis is not the method for the statical approach. METHODS : For measuring the friction noise between the surface and vehicle's tire, NCPX method was used. With NCPX method, SPL can be obtained using the frequency analysis such as Discrete Fourier Transform(DFT), Fast Fourier Transform(FFT) and Constant Percentage Bandwidth(CPB) Analysis. In this research, CPB analysis was only conducted for deriving A-weighted SPL from the sound power level in terms of frequencies. EKF Algorithm and Regression analysis were performed for estimating the SPL regarding the vehicle velocities. RESULTS : The study has shown that the results related to the coefficient of determination and RMSE from EKF Algorithm have been improved by comparing to Regression analysis. CONCLUSIONS : The more the vehicle is fast, the more the SPL must be high. But in the results of EKF Algorithm, SPLs are irregular. The reason of that is the EKF algorithm can be reflected by the error covariance from the measurements.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.144-151
• /
• 2008

The bi-modal vehicle is composed of two car-bodies and three axles. Each axle of the vehicle has an independent suspension and all wheels are steerable. Since the bi-modal vehicle has longer wheelbase than most urban buses, the All-Wheel-Steering(AWS) system is adapted for to ensure safe driving and proper turning radius on a curved road. This paper proposes an AWS control algorithm for stable driving of bi-modal vehicle. Steering angles and directions of each axle of bi-modal vehicle changed according to the driving environment and steering modes. In the case that front and rear axles should be steered in opposite directions is a negative mode, and the other case that the axles should be steered in the same direction is a positive mode. For example, in the positive mode, front and real axles are steered in the same direction, while in the negative mode, they are steered in the opposite direction. A multibody model of the vehicle is used to verify the performance of the steering algorithm and simulation results of 2WS are compared with those of AWS under the same condition.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.9-16
• /
• 2012

The research of vehicle license plate recognition has been widely studied for the smart city project. The license plate recognition can be hard due to the geometric distortion and the image quality degradation in case of capturing the driving car image at CCTV without trigger signal on the road. In this paper, the high performance vehicle license plate recognition system using edge-based segment image is introduced which is robust in the geometric distortion and the image quality degradation according to non-trigger signal. The experimental results of the proposed real time license plate recognition algorithm which is implemented at the CCTV on the road show that the plate detection rate was 97.5% and the overall character recognition rate of the detected plates was 99.3% in a day average 1,535 vehicles for a week operation.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.31-37
• /
• 2012

Today, the core technology of an automobile is becoming to IT-based convergence system technology. To cope with many kinds of situations and provide the convenience for drivers, various IT technologies are being integrated into automobile system. In this paper, we propose an convergence system, which is called Augmented Driving System (ADS), to provide high safety and convenience of drivers based on image information processing. From imaging sensor, the image data is acquisited and processed to give distance from the front car, lane, and traffic sign panel by the proposed methods. Also, a converged interface technology with camera for gesture recognition and microphone for speech recognition is provided. Based on this kind of system technology, car accident will be decreased although drivers could not recognize the dangerous situations, since the system can recognize situation or user context to give attention to the front view. Through the experiments, the proposed methods achieved over 90% of recognition in terms of traffic sign detection, lane detection, and distance measure from the front car.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.85-92
• /
• 2003

Due to the expansion of freeway networks in Korea, drivers have more routes to choose. Traffic information on various alternative roadway sections and routes may help drivers choose the optimal route that minimizes travel time or cost. Traffic information on roadways is, therefore, invaluable in sense that individual drivers could reduce their travel time or cost by selecting optimal routes, and furthermore total travel cost of the system could be lowered. However, consensus about the price of traffic information that drivers are willing to pay is not made yet. Current price of traffic information is decided according to the price of similar information such as stock, weather and so on. To investigate the value of traffic information, a survey was conducted at freeway rest areas near Seoul Megalopolis area including Kyunggi Province. Eight hundred drivers who had travelled on freeway within a year were randomly selected. Purposive Quota Sampling was used. A price-response function, a relationship between price and sales, was obtained based on the survey, followed by sensitivity analysis