• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.583-586
• /
• 2004

In this paper, we have analyzed the performance of synchronization of CCK(Complementary Code Keying) modulation scheme used for IEEE 802.11g wireless LAM system supporting 54 Mbps of high speed data rate over 2.4 GHz. At receiver, the clock frequency offset is caused by noise or fading. This frequency error occurs the offset of clock timing and causes ISI. Therefore the tracking is required to reduce the clock timing offset. The DLL(Delay Lock Loop), asychronization mode, performing tacking the clock is used for the simulation. The simulation result shows jitter variance and BER performance in the AWGN and multipath fading channel environment.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.454-458
• /
• 2012

The CBTC(Communication based Train Control) and WPAN(Wireless Personal Area Network) systems employed on 2.4GHz ISM band wireless networks provide complementary service within the same environment. Coexistence between the networks will be impaired if the mutual packets are uncertainty associated the timing or gaussian distance. This paper analyzes the impact of the mutual interference and proposed method to minimize the effect of the WPAN system signals on CBTC system. The performance analysis is illustrated by examining the symbol error rate versus signal to noise interference ratio in terms of carrier frequency offset. The method contributes to reduce the symbol error rate drastically. However it can't be a fundamental solution for the impact on the interference problem. It may be needed for railway only frequency after checking the problems of the current railway frequency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.917-922
• /
• 2018

In the conventional interchannel interference self-cancellation (ICI-SC) schemes, the length of sampling window is the same as the symbol length of orthogonal frequency division multiplexing (OFDM). Thus, the number of complex operations to compute the interference coefficient of each subchannel is significantly increased. To solve this problem, we present an approximated mathematical model for the coefficients of ICI-SC schemes. Based on the proposed approximation, we analyze mean squared error (MSE) and computational complexity of the ICI-SC schemes with the length of sampling window. As a result, the presented approximation has an error of less than 0.01% on the MSE compared to the original equation. When the number of subchannels is 1024, the number of complex computations for the interference coefficients is reduced by 98% or more. Since the computational complexity can be remarkably reduced without sacrificing the self-cancellation capability, it is considered that the proposed approximation is very useful to develop an algorithm for the ICI-SC scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.231-234
• /
• 2008

The paper proposed the new underwater wireless communication system fitted to non-linear acoustic channel. Generally, in non-linear acoustic channel, one used to do acoustic communication using parametric effect that is some effect caused from acoustic wave having frequency different of two primary acoustic wave frequency. In the paper, Offset PSK communication method fitted to non-linear acoustic channel was proposed, and it was demonstrated through simulations.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2570-2572
• /
• 2001

본 논문에서는 저주파 신호 증폭기에서 DC 이득에 의해 앰프가 포화되는 것을 막기 위해 필요한 큰 커플링 커패시터와 바이어스 저항의 면적을 줄이기 위한 회로를 제안한다. 또한, 이 경우 연산증폭기의 양 입력 단에 연결되는 바이어스 저항과 앰프의 이득을 설정하기 위해 사용되는 저항사이의 큰 값의 차이로 인해 발생하는 오프셋을 줄이기 위해 적절한 기준 전압을 정의하는 방법을 소개한다. 제안된 회로를 사용했을 때, 기존의 저항으로 앰프의 입력단을 바이어스할 때의 한계인 오프셋의 문제를 해결함으로써 보다 최적화된 면적으로 설계가 가능했다. 이 기법을 적외선 리모콘 수신 IC의 앰프에 적용했을 때, 커플링 커패시터와 바이어스 저항으로 설정되는 -3dB 주파수를 3kHz에 설정한 경우, 저항과 커패시터가 차지하던 면적의 12%를 차지했다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.569-580
• /
• 2012

In this paper, an enhanced initial ranging algorithm for large-cell coverage fixed wireless communication system is proposed. In typical wireless communication system such as WiBro, because a round-trip delay between a transmitter and a receiver is within one OFDM (Orthogonal Frequency Division Multiplexing) symbol duration, a frequency-domain differential correlation method is generally used. However, the conventional method cannot be applied due to an increase of a maximum time delay in large-cell system. In case of an accumulative differential method, estimation errors can occur because of frequent sign transitions. In this paper, therefore, we propose an algorithm which can estimate a total timing offset in a ranging channel structure for 15 km cell. The proposed method can improve performance by sign comparison based sign error correction rule between the estimated values and using a weighting scheme based on channel correlation, the number of accumulations, and the noise reduction effect in normalization process. Also, it can estimate the integer timing offset of symbol duration by comparing peak-powers after compensating for the fractional timing offset of symbol duration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.97-103
• /
• 2018

In satellite communication, modulated beacon signal is spreaded by gold sequence and the modulated beacon is transmitted via linear phase modulation. Due to the difference in characteristics of the satellite and the receiver on the ground, frequency offset (FO) occurs. An existing modulated beacon receiver is a method of synchronizing the frequency of a modulated beacon signal using FFT(Fast Fourier Transform), which not only increases the delay and complexity in terms of system implementation but also has a separate circuit for compensating the phase difference due to FO and phase offset from FFT points. In order to overcome this problem, this paper proposes and analyzes a scheme for compensating and demodulating the coarse FO and phase offset at one time using the 2-phase shaped characteristics of the modulated beacon signal. Also, through the simulation, the modulation index suitable for the proposed method is analyzed and the appropriate cumulative number is also analyzed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.107-113
• /
• 2014

A VCO (Voltage Controlled Oscillator) and a divide-by-4 high speed frequency divider are implemented using 65nm CMOS technology for 60GHz wireless communication system. The mm-wave VCO was designed by NMOS cross-coupled LC type using current source. The architecture of the divide-by-4 high speed frequency divider is differential ILFD (Injection Locking Frequency Divider) with varactor to control frequency range. The frequency divider also uses current sources to get good phase noise characteristics. The measured results show that the VCO has 64.36~67.68GHz tuning range and the frequency divider divides the VCO output by 4 exactly. The high output power of 5.47~5.97dBm from the frequency divider is measured. The phase noise of the VCO including the frequency divider are -77.17dBc/Hz at 1MHz and -110.83dBc/Hz at 10MHz offset frequency. The power consumption including VCO is 38.4mW with 1.2V supply voltage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.649-655
• /
• 2005

We propose a robust channel estimation method against imperfect synchronization in orthogonal frequency division multiple access (OFDMA) downlink systems. We address time and frequency synchronization, and the channel estimation at the same time, and try to minimize the error propagation from the time and frequency synchronization steps into the chailnel estimation. The simulation results show that the proposed channel estimation method outperforms the conventional algorithms by about 3dB, and circumvents the problem of mismatch among the synchronization tasks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.511-521
• /
• 2007

In this paper, we designed and fabricated a Ka-band synthesizer module. In addition, the systematic layout procedure and the test procedure were presented for the construction of compact synthesizer. To implement the Ka-band synthesizer, X-band VCO is employed as VCO and its frequency was multiplied by 3 with frequency tripler. The fabricated frequency synthesizer shows a frequency tuning range of 500 MHz, output power of about 14 dBm, and a phase noise of -96.17 dBc/Hz at the 100 kHz offset frequency.