• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제41권6호
• /
• pp.698-706
• /
• 2016

Orthogonal frequency division multiplexing (OFDM) has high peak to power ratio (PAPR). High PAPR makes problems such as signal distortion and circuit cost increasing. To solve the problemsm several PAPR reduction methods have been proposed. However, synchronization and orthogonality in OFDM systems may be a limitation to reduce latency for 5G networks. Generalized frequency division multiplexing (GFDM) is one of the possible solutions for asynchronous and non-orthogonal systems, which are more preferable to reduce the latency. However, multiple subsymbols in GFDM result in more superposition in time domain, GFDM has higher PAPR. Selective mapping (SLM) is one of PAPR reduction techniques in OFDM, which uses phase shift. The PAPR of GFDM SLM is compared to conventional GFDM and OFDM SLM in terms of PAPR reduction enhancement via numerical simulations. In addition, the out-of-band performance is analyzed in the aspect of asynchronous condition interference.

• Journal of Satellite, Information and Communications
• /
• 제6권1호
• /
• pp.86-96
• /
• 2011

In this paper we propose a Pre-rake system applied with a frequency domain equalizer in TDD/CDMA multi-code transmission. The Pre-rake system has been well known technique in TDD/CDMA to make a receiver simple. However, it still has residual losses of path diversity and signal to noise ratio (SNR). However, gathering all the residual paths demands an additional hardware such as a rake combiner at the receiver. For the reason Pre/Post-rake system has already been proposed at up/downlink correlated channel conditionunder the assumption of noisier channel. There is a trade-off between the first purpose of Pre-rake that makes hardware simple at the receiver and the performance improvement. From the point the frequency domain equalizer (FDE) can be considered in Pre/Post-rake to supply the receiver with the flexible equalizing methods with rather reduced complexity compared with time domain rake combiner or equalizers. Pre-rake itself increases the number of multipath, which results from the convolution of Pre-rake filter and wireless channel, and FDE must be well matched to Pre/Post-rake, while it considers the relationship of hardware complexity and the performance. In this paper, the Pre-rake/Post-FDE system is introduced at TDD/CDMA multi-code transmission. In addition, the cyclic prefix reduction method in the proposed system is introduced, and the theoretical analysis to the proposed system is given by assuming Gaussian approximation, and finally the numerical simulation results are provided.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제45권5호
• /
• pp.40-49
• /
• 2008

A Frequency synthesizer for mobile-DTV applications is implemented using $0.18{\mu}m$ CMOS process with 1.8V supply. PMOS transistors are chosen for VCO core to reduce phase noise. The measurement result of VCO frequency range is 800MHz-1.67GHz using switchable inductors, capacitors and varactors. We use varactor bias technique for the improvement of VCO gain linearity, and the number of varactor biasing are minimized as two. VCO gain deterioration is also improved by using the varactor switching technique. The VCO gain and interval of VCO gain are maintained as low and improved using the VCO frequency calibration block. The sigma-delta modulator for fractional divider is designed by the co-simualtion method for accuracy and efficiency improvement. The VCO, PFD, CP and LF are verified by Cadence Spectre, and the sigma-delta modulator is simulated using Matlab Simulink, ModelSim and HSPICE. The power consumption of the frequency synthesizer is 18mW, and the VCO has 52.1% tuning range according to the VCO maximum output frequency. The VCO phase noise is lower than -100dBc/Hz at 1MHz at 1MHz offset for 1GHz, 1.5GHz, and 2GHz output frequencies.

• Journal of the Korean Ceramic Society
• /
• 제38권11호
• /
• pp.980-986
• /
• 2001

Bragg reflector type FBAR was fabricated on the Si(100) substrate. We measured a frequency response of the resonator at 5.2 GHz and analyzed it by numerical calculation considering actual acoustic losses of each layer in the structure. We fabricated nine layer Bragg reflector of W-SiO$_2$pairs using r.f. sputtering method and fabricated AlN piezoelectric and Al electrodes using pulsed dc sputtering. The return loss(S$_{11}$) of the fabricated Bragg reflector type FBAR was 12 dB at 5.38 GHz and the series resonance frequency(f$_{s}$) was 5.376 GHz and the parallel resonance frequency(f$_{p}$) was 5.3865 GHz. Effective electro-mechanical coupling constant (K$_{eff{^2}}$) and Quality factors(Q$_{s}$), the Figures of Merit of the resonator, were about 0.48% and 411, respectively. We extracted acoustic parameters of AlN piezoelectric and reflection coefficient of the Bragg reflector by numerical calculation. We could know that material acoustic impedance and wave velocity of AlN piezoelectric decreased for intrinsic value and the electromechanical coupling constant(K$_2$) value was very low owing to the poor quality of the AlN piezoelectric. Reflection coefficient of Bragg reflector was 0.99966 and reflection band was very wide from 2.5 to 9.5 GHz.

• Journal of IKEEE
• /
• 제2권1호
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 한국마이크로전자및패키징학회 2000년도 추계 기술심포지움 논문집
• /
• pp.81-85
• /
• 2000

마이크로파대역에서 우수한 유전적 특성을 가지며 소결이 90$0^{\circ}C$ 이하에서 가능하여 Ag와 동시 소결이 가능한 유전체 조성을 개발하여 RF MCM-C(Multi-chip Module on Ceramic) 제조를 위한 유전체 테잎 제조에 대한 기초적인 실험과 Ag 전극과 동시소성에 대한 반응성 실험을 하였다. 본 실험에 앞서 개발된 유전체 조성의 마이크로대역에서의 유전특성은 유전율 24, 품질계수 30,000 이상, 공진주파수 온도계수 37 ppm/$^{\circ}C$ 이었고 소결온도는 85$0^{\circ}C$이었다. 이 유전체를 이용결함 없는 테잎 제조를 위한 유기용매의 선택, 바인더 및 가소제의 량 및 비에 따른 테잎의 소결 전 .후의 상태를 비교.분석하여 최적의 조성비를 결정하였다. 테잎과 은전극과의 반응성 실험결과 은과 유전체의 상호확산은 거의 이루어지지 않음을 확인하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제12권1호
• /
• pp.83-94
• /
• 1999

본 연구에서는 시스템의 해석적 모델과 측정된 응답을 이용하여 입력하중을 추정하는 역해석 기법을 유한요소모델과 같은 해석적 모델을 알고 있는 경우와 주파수응답함수와 같은 실험적 모델을 알고 있는 경우에 대하여 제시하였으며 이때 발생되는 수학적 악조건의 특성을 규명하였다. 역해석시 발생되는 수학적 악조건은 시스템의 동강성행렬과 측정위치에 의해 결정되는 특성행렬의 조건수에 따라 결정되며 역해석기법을 공학문제에 적용하기 위하여는 특성행렬의 조건수가 낮아지도록 주자유도 및 측정점을 선택하여야 하고 특히 공진영역 및 반공진영역에서는 필연적으로 악조건이 발생됨을 알 수 있었다. 수학적 악조건의 특성을 명확히 규명하기 위하여 간단한 수치해석을 통하여 그 결과를 제시하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.317-323
• /
• 1998

이 논문에서는 웨이브렛 신경회로망을 사용하여 알려지지 않은 비선형 시스템을 안정하게 적응제어하는 문제를 다룬다. 비선형 시스템의 정확한 제어는 함수를 근사화하는 데 사용된 함수 근사화기의 정확성과 효율성에 의존한다. 이에 비선형 시스템 제어에 기준 함수의 선택이 자유롭고 함수 근사화 능력이 뛰어난 웨브렛 신경회로망을 사용한다. 초기 웨이브렛 신경회로망 제어기 설정은 웨이브렛 신경회로망 변수인 신축과 이동 값을 제어기 입력의 시-주파수 특성을 분석해서 구하고, 연결강도는 Lyapunov 안정성 이론에 기초한 적응 법칙을 사용하여 조절한다. 이를 비선형 시스템인 역 진자 시스템에 적용한다.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1706-1707
• /
• 2007

전력 계통의 사고 검출과 사고예측으로 계통의 안정성과 신뢰성을 확보하여 전력계통의 최적 운전을 유지하게 하기위해서는 전력계통의 가장 기본 적인 요소인 전압, 전류, 전력, 주파수 및 위상의 정확한 계측이 필요하게 되는데, 넓은 범위의 입력신호를 AD 변환 범위로 변환하게 되면 작은 입력신호에 대해서는 AD로 너무 작은 신호로 변환되어 정확한 계측을 할 수가 없게 된다. 이러한 문제를 해결하기 위해 입력 신호의 크기에 따라 증폭비율을 자동적으로 선택할 수 있는 방법과 PT나 CT의 특성에 따른 신호 왜곡과 AD 컨버터의 비선형성에 따른 신호 계측의 오차를 줄일 수 있는 캘리브레이션 방법을 소개하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제17권4호
• /
• pp.45-52
• /
• 1980

In order to eliminate the phase errors caused by the finite GB product of operational amplifiers, novel integnator circuits are proposed. These circuits are characterized by their positive phase error angles and integrator selectivity. The positive sign of the Q and of the circuits compensates the negative selectivity and phase error angles, inherent in the integrated operational amplifiers. Miller inverting intergrator of a biquad circuit realized by Thomas is replaced by the proposed circuit and the band-pass frequency response of the modified biquad network is experimentally analyzed. A considerable improvement is recognized to such extent that the center frequency of the band-pass filter is allowed to be shifted up to 20KHz, which has been infeasible with conventional biquad networks.