• Broadcasting and Media Magazine
• /
• v.16 no.4
• /
• pp.31-45
• /
• 2011

사용자가 원하는 3D 사운드 혹은 소리의 공간감을 원하는 대로 재현할 수 있는 오디오 시스템은 오랜 기간 동안 인류가 가지고 싶었던 꿈의 기계였다. 그러나 과연 개인 혹은 사용자가 원하는 3D 사운드라는 것이 무엇이며 어떻게 정의하여야 하는지는 명확하지 않다. 이것은 매우 주관적인 개념일 뿐만 아니라 개인에 따라 다를 수 있으며, 그 평가에 대한 객관적인 방법 또한 존재하지 않는다. 관련된 연구를 살펴보면, 원하는 소리의 파동 전파 자체를 시공간 상에서 물리적으로 재현하는 WFS(Wave Field Synthesis)나 Ambisonics, 또는 머리전달함수(HRTF: Head Related Transfer Function)를 기반으로 한 많은 연구들이 있다. 이렇게 재현된 음장(sound field)을 보면 이들이 인지되고 평가되는 등의 객관화를 위하여는 청취 환경에 따라 그 특성이 바뀌고 동일한 환경에서도 청취자에 따라 다르게 인지되는 근본적인 문제점을 가지고 있다. 음장 재현 방법의 이러한 근본적인 문제는 놀랍게도 과거의 스테레오 시스템에서 볼 수 있는 밸런스 노브(balance knob)로부터 그 해결의 실마리를 찾을 수 있다. 밸런스 노브는 보편적인 최적의 소리를 찾는 대신에 청취자가 원하는 음향 효과를 얻을 때까지 직접적으로 소리를 청취하고, 스스로 조절하여 평가할 수 있는 매개체의 역할을 수행한다. 만일 밸런스 노브와 같이 청취자가 원하는 3D 사운드를 스스로 평가하고 조절하기 위한 방법을 마련할 수 있다면? 즉, 청취자가 시공간적으로 원하는 3D 사운드를 실시간으로 청취하고 변화시킬 수 있는 인터페이스를 구현할 수 있다면? 과연 그러한 것이 어떻게 가능할 수 있는지 체계적인 검토가 이루어질 수 있다면 매우 좋을 것이다. 본 고는 이러한 것을 가능케 할 수 있는 즉, 청취자가 자유 자재로 원하는 음장을 형성할 수 있는 렌더링 기법 및 즉각적인 피드백이 가능한 인터페이스를 소개하고 있다. 인터페이스는 현재까지 오디오 시스템에서 주로 사용되는 주파수 이퀄라이져(frequency equalizer)와 매우 유사한 특징이 있다. 이러한 점을 감안하여 "Spatial Equalizer$^{(R)}$"라는 이름을 붙여 보았다. Spatial Equalizer$^{(R)}$는 공간 상에 하나의 점 또는 다수의 점으로 표시되는 가상 음원을 사용자가 조종하여 원 소리의 공간감을 제어할 수 있도록 구성되어 있다. 공간 상에 다수의 점 음원들의 위치를 변화시키거나 크기를 변화시킴으로써 청취자가 원하는 공간감을 구현할 수 있도록 하고 있다. 중요한 것은 종전의 이퀄라이져와 같이 Spatial Equalizer$^{(R)}$에 의해 형성되는 음장이 어떤 객관적인 척도에 의해서 평가되는 대신 사용자에 의해 직접 주관적으로 평가되고, 선택된다는 점이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2407-2414
• /
• 1999

This paper introduces the concept of warped discrete cosine transform (WDCT) and an image compression algorithm based on the WDCT. The proposed WDCT is a cascade connection of a conventional DCT and all-pass filters whose parameters can be adjusted to provide frequency warping. In the proposed image compression scheme, the frequency response of the all-pass filter is controlled by a set of parameters with each parameter for a specified frequency range. For each image block, the best parameter is chosen from the set and is sent to the decoder as a side information along with the result of corresponding WDCT computation. For actual implementation, the combination of the all-pass IIR filters and the DCT can be viewed as a cascade of a warping matrix and the DCT matrix, or as a filter bank which is obtained by warping the frequency response of the DCT filter bank. Hence, the WDCT can be implemented by a single matrix computation like the DCT. The WDCT based compression, outperforms the DCT based compression, for high bit rate applications and for images with high frequency components.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2512-2520
• /
• 2013

In this paper, the T-SRR (Triple Split Ring Resonator) using MNG (mu-Negative) meta-material adapted in a low-loss bandpass filter with 3-stages is suggested. The size of the T-SRR in the proposed bandpass filter with low dielectric constant PCB can be easily controlled. And the ${\lambda}/4$ transmission line theory is applied. The proposed T-SRR and filter have the center frequency of 10 GHz with QL value of 184 for military-satellite communication system in I band. The experimental results of the filter show that the insertion and return losses are 1.44 dB and 17.3 dB with bandwidth of 10 %, respectively. The proposed filter will be redesigned by IPD material etc. should be placed here. These instructions give you guidelines for preparing papers for JICCE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1182-1189
• /
• 2007

Frequency reuse in a cellular wireless communication environment gives rise to a phenomenon of cochannel interference. This paper introduces a power control strategy for OFDM based communication systems operating in such an environment. Among the existing power control schemes, IWF(iterative waterfilling) is known to exhibit relatively good performance. However, it requires feedback of power level and bit allocation information for each subcarrier from a receiver to its associated transmitter, which can lead to a considerable overhead, especially for the case of employing large number of subcarriers. Motivated by this, we present a simplified power control scheme with reduced overhead feedback, which allocates some nonzero identical power to the subcarriers of which channel conditions are above a certain threshold and zero power to the other ones. Computer simulations show that the proposed strategy produces a good approximation to the performance of the IWF in terms of the transmission power level while it requires less overhead feedback.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2013

This paper presents a design of LLC resonant converter IC for LED backlight unit based on PFM/PWM dual-mode feedback. Dual output LLC resonant architecture with a single inductor is proposed, where the master output is controlled by the PFM and slave output is controlled by the PWM. To regulate the master output PFM is used as feedback to control the frequency of the power switch. On the other hand, PWM feedback is used to control the pulse width of the power switch and to regulate the slave output. This chip is fabricated in 0.35um 2P3M BC(Bipolar-CMOS-DMOS) Process and the die area is $2.3mm{\times}2.2mm$. Current consumptions is 26mA from 5V supply.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.39-48
• /
• 2001

We have studied the design of the photonic bandgap (PBG) structure on the microstrip line that can effectively control the fractional bandwidth of the passband formed in the stopband by adding the stub in the cell of the microstrip PBG structure. As the length of the stub increases, the cutoff frequency and the center frequency of the stopband are decreased, while the bandwidth of the stopband is increased. We have also found that the fractional bandwidth of the passband formed in stopband by the introduction of defect decreases as the stub length is increased. These results mean that adding the stub in the normal PBG structure is an effective way to control the fractional bandwidth. As an application example, we have implemented a microwave duplexer using the proposed structure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.102-108
• /
• 2011

The existing vessels lighting control system has several problems, which are complexity of construction and high cost of establishment and maintenance. In this paper, We designed low cost and high performance lighting control system at digital vessel environment. We proposed a system which recognize the user's emotions after obtaining the biological informations about user's bio information(pulse sensor, blood pressure sensor, blood sugar sensor etc) through wireless sensors controls the LED Lights. This system classified emotions using backpropagation algorithm. We chose 3,000 data sets to train the backpropagation algorithm. As a result, obtained about 88.7% accuracy. And the classified emotions find the most appropriate point in the method of controlling the waves or frequencies to the red, green, blue LED Lamp comparing with the 20-color-emotion models in the HP's 'The meaning of color' and control the brightness or contrast of the LED Lamp. In this method, the system saved about 20% of the electricity consumed.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.117-124
• /
• 2011

This study was realized the home network system for home care by bio-physical sensor system, to convey for the remote physical signal. The composition condition has four functions of displacement point for a Vision, Somatosensory, Vestibular and CNS that the basic measurement used to a Heart Rate, Temperature, Weight. Physical signal are decided to search a max and min point with adjustment of 0.01 unit in the reference level. There were checked physical condition of body balance to compounded a physical neuroceptor of sensory organ for the measurement such as a Vision, Somatosensory, Vestibular, CNS, BMI. There are to check a health care condition through a combination of physical organ with a posturography of a exercise. The service of home network system can be used to support health care management system through health assistants in health care center and central health care system. It was expected to monitor a physical parameter for the remote control health management system.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.142-147
• /
• 1995

Soliton pulse outputs are generated with figure '8' type erbium-doped fiber laser mode-locked by using a fiber loop mirror. The fiber loop mirror consists of an erbium-doped fiber amplifier at the one end of the loop, and 504 m-long dispersion-shifted fiber as a nonlinear medium. By pumping with a $1.48{\mu}m$ wavelength laser diode and adjusting the polarization controllers inside the loop, soliton pulses are generated with 1574 nm center wavelength and 1.2 nm linewidth. The soliton pulses are found randomly spaced within the fundamental period corresponding to cavity round trip time. The autocorrelation trace shows that the pulse width is 2.4 ps, which is in good agreement with the theoretical prediction. The pulsewidth- bandwidth product is found to be 0.348 which means that the pulses are nearly transform-limited.imited.