• Title/Summary/Keyword: 주파수성형

Search Result 72, Processing Time 0.023 seconds

Estimation of the thickness of refractory ceramics using the impact-echo method (충격반향기법을 이용한 내화물 두께 추정)

  • Lee, Seongmin;Shin, Namho;Roh, Yongrae
    • The Journal of the Acoustical Society of Korea
    • /
    • v.36 no.4
    • /
    • pp.247-253
    • /
    • 2017
  • Generally, the vibration characteristics of refractory ceramics are identified by assuming them as isotropic materials. However, in practice, refractory ceramics exhibit anisotropic properties as they are manufactured by pressing ceramic powders along a particular direction. Therefore, in this research, the frequency responses of a refractory ceramic brick along its width, length, and height directions were acquired using finite element analysis by assuming that the ceramics had tetragonal symmetry in their material properties. The validity of the numerical analysis results was verified by comparing them with those from experimental measurements. Based on the frequency response, the thicknesses of the refractory brick along three different directions were estimated using the impact-echo technique. The maximum difference between the estimated and actual thicknesses was observed to be less than 5 %. This result confirms the effectiveness of the impact-echo technique along with anisotropic property characterization to evaluate the thickness of the refractory ceramic.

WDM Optical True Time-Delay for X-Band Phased Array Antennas (X-밴드 위상 배열 안테나를 위한 WDM 광 실시간 지연선로)

  • Jung, Byung-Min;Shin, Jong-Dug;Kim, Boo-Gyoun
    • Korean Journal of Optics and Photonics
    • /
    • v.18 no.2
    • /
    • pp.162-166
    • /
    • 2007
  • In this paper, we propose a WDM optical true time-delay (OTTD) beam former for phased way antenna (PAA) systems. It is composed of a delay lines matrix and a multiwavelength source with discrete DFB laser diodes. The building block of a delay lines matrix is a $2\times2$ optical MEMS switch with proper fiber-optic delay line connected between cross ports. A $4\times3$ matrix using four DFB lasers has been fabricated with unit time-delay difference of 12 ps. Maximum time-delay error was measured to be -1.74 ps and +1.14 ps at a radiation angle of $46.05^{\circ}$, corresponding to error range of $-2.87^{\circ}\sim+1.88^{\circ}$. By measuring time-delays at six different RF frequencies from 5- to 10-GHz, we verified the true time-delay characteristic of our OTTD.

COMPARISON OF RESONANCE FREQUENCY ANALYSIS BETWEEN VARIOUS SURFACE PROPERTIES (임프란트 표면 처리에 따른 공명주파수 변화에 대한 연구)

  • Bae, Sang-Bum;Lee, Seong-Hyun;Song, Seung-Il
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.32 no.2
    • /
    • pp.107-111
    • /
    • 2010
  • Purpose: The aim of this study is to compare the stability between Mg-incorporated implant, TiUnite and Machined implant. Materials and Methods: Premolars of 3 Mini pigs (24 months) were extracted. After 2 months later, total 27 fixtures of implants (9 of each design : Machined/ TiUnite/ Mg-incorporated) were inserted into the mandible of 3 mini-pig. Implant stability was estimated by RFA in installation to 2, 4 & 6 weeks. Statistical analysis of RFA values was performed with time and between groups using repeated measure ANOVA and turkey's multiple comparison test. Results: In analyzing the mean value for the observation periods, three types of implants yielded a slight decrease in RFA mean value after 2 week, followed by increase at 4-6 weeks. Mg incorporated oxidized implants demonstrated significantly higher RFA mean values at 6 weeks comparing other groups. The difference of RFA value with time and between groups was statistically significant. Conclusion: We concluded that Mg implants may reduce failure rates of clinical implants In the early period of bone healing and Mg implants may shorten the bone healing time from surgery to functional loading.

Czochralski crystal growth by the accelerated crystal rotation technique (결정봉 회전 가속화 기법에 의한 초크랄스키 결정 성장)

  • 김승태;최정일;성형진
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.8 no.1
    • /
    • pp.18-28
    • /
    • 1998
  • A laboratory experiment was made of a control of temperature oscillation in Czochralski convection. Numerical computation was also made to delineate the control of temperature oscillation. The suppression of temperature oscillation was achieved by varying the rotation rate of crystal rod ($\Omega=\Omega_0(1+A sin 2{\pi}ft/t_p)$), where A denotes the amplitude of rotation rate and f the frequency factor. Based on the inherent dimesionless time period of temperature oscillation ($t_p$), the suppression rate of temperature oscillation was characterized by the mixed convection parameter ($0.217{\leq}Ra/PrRe^2{\leq}1.658$). The optimal values of A and f were also scrutinized. To understand the suppression mechanism of temperature oscillation, the controls of isotherm($\theta$) and equi-vorticity($\omega$) were investigated.

  • PDF

Effect of Space Charge and Conduction Current on Water Tree Retardation (공간전하 및 전도전류가 수트리 억제에 미쳐는 영향)

  • Kwon, Y.H.;HwangBo, S.;Shin, D.S.;Kim, S.C.;Han, M.K.
    • Proceedings of the KIEE Conference
    • /
    • 1997.07d
    • /
    • pp.1615-1617
    • /
    • 1997
  • 절연재료로서 널리 쓰이는 XLPE(Crosslinked Polyethylene)의 경우, 내부에 발생하는 수트리에 의해 절연체로서의 성능 및 내구성이 많은 영향을 받게 된다. 이에 대한 연구가 진행되어 왔지만 수트리 발생과 진행에 관한 메커니즘은 아직까지 정확하게 알려지지 않은 상태이다. 이 논문에서는 몇 가지의 수트리 억제 컴파운드를 선정하여 시간과 온도에 따른 수트리 발생을 관찰하고, 컴파운드 내의 공간전하 및 전도전류가 수트리 억제에 미치는 영향을 조사하였다. 수트리가속을 위하여 주파수가속열화 방법을 사용하고 온도와 시간에 따른 발생 및 진전을 관찰하였다. 실험에서는 압축성형된 평판형 시편을 사용하였으며 상부전극으로는 $AgNO_3$ 수용액을, 하부전극으로는 금속전극을 사용하였다. 그리고 컴파운드 내부의 공간전하 분포 및 전도전류 측정을 하기위해 PEA(Pulsed Electro Acoustic) 방법을 이용하였다.

  • PDF

Effects of Periodic Blowing Through a Spanwise Slot on a Turbulent Boundary Layer (II) - Effects of Blowing Frequency - (슬릿을 통한 주기적 국소 가진이 난류경계층에 미치는 영향 (II) - 분사 주파수의 효과 -)

  • Kim, Kyoung-Youn;Sung, Hyung-Jin
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.28 no.1
    • /
    • pp.41-51
    • /
    • 2004
  • A direct numerical simulation is performed to analyze the effects of a localized time-periodic blowing on a turbulent boundary layer flow at R $e_{+}$=300. Main emphasis is placed on the blowing frequency effect on near-wall turbulent flow structures at downstream. Wall-normal velocity on a spanwise slot is varied periodically at different frequencies (0.004$\leq$ $f^{+}$$\leq$0.080). The amplitude of periodic blowing is $A^{+}$=0.5 in wall nit, which corresponds to the value of $v_{rms}$ at $y^{+}$=15 without blowing. The frequency responses are scrutinized by examining the phase or time-averaged turbulent statistics. The optimal frequency ( $f^{+}$=0.03) is observed, where maximum increase in Reynolds shear stress, streamwise vorticity fluctuations and energy redistribution occurs. The phase-averaged stretching and tilting term are investigated to analyze the increase of streamwise vorticity fluctuations which are closely related to turbulent coherent structures. It is found that the difference between PB and SB at a high blowing frequencies is negligible.e.e.

Control of Turbulent Recirculating Flow by Local Forcing (국소교란에 의한 난류 재순환유동의 제어)

  • 전경빈;성형진
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.18 no.2
    • /
    • pp.446-455
    • /
    • 1994
  • An experimental study is conducted for the turbulent recirculating flow behind a backward-facing step when the oscillating jet is issued sinusoidally through a thin slit at the separation edge. Two key parameters are dealt with in the present experiment, i.e., the amplitude of forcing and the forcing frequency. The Reynolds number based on the step height is varied from 25,000 to 35,000. In order to investigate the effect of local forcing, turbulent structures are scrutinized for both the flow of forcing and the flow of no forcing. The growth of shear layer with a local forcing is larger than that of no forcing. The influence of a local forcing brings forth the decrease of reattachment length and the particular frequency gives a minimum reattachment length. The most effective frequency depends on the non-dimensional frequency, St/sub .theta./, based on the momentum thickness at the separation point. A comparative study leads to the conclusion that the large-scale vortical structure is strongly associated with the forcing frequency and the natural flow instability.

Responses of a roll-pitch coupled nonlinear system to the primary resonance of the roll mode (횡동요 모드와 주공진 된 횡-종동요연성 비선형계의 응답)

  • 오일근
    • Journal of Ocean Engineering and Technology
    • /
    • v.11 no.3
    • /
    • pp.107-115
    • /
    • 1997
  • 비성형 동력학계로 모델링된 부유수송체의 동적응답을 조사하고 그 운동의 안정성을 해석하였다. 종동요 모우드의 고유주파수가 횡동요 모우드의 고유주파수의 두배가 되는, 즉, 2:1 내부공진 혹은 자기계수공진인 조건하에서, 이부유수송체는 한 운동 모우드의 직접가진에 의해 간접가진된 다른 모우드가 대진폭 응답을 보일 수 있음을 밝혔다. 또항, 종동요 모우드의 감쇠력은 비교적 넓은 범위의 운동에 대해 선형적임에 반해, 횡동요 모우드의 감쇠력은 점성의 영향이 대단히 커서 비선형성이 대단히 강한 것으로 알려져 왔다. 이 문제를 수학적으로 모델링하기 위하여, 종동요 모우드의 운동방정식에는 선형및 제곱형의 합의 형태인 감쇠력 모형을 사용하였다. 다중척도법을 사용하여 이 두가지 운동 모우드의 주기적 응답및 그의 안정성에 미치는 제곱형 비선형 횡동요 감쇠력의 영향을 밝혔다. 조우주기가 횡동요 모우드의 고유주기와 근사한 경우에 대하여 이 비선형계의 응답을 구하고 주파수-응답 곡선으로 나타내었다.

  • PDF

The Effects of Insulating Materials on the Magnetic Properties of Nanocrystalline FeCuNbSiB Alloy Powder Cores (FeCuNbSiB 나노결정립 합금 분말코아의 자기적 특성에 미치는 절연체의 영향)

  • Noh, T.H.;Choi, H.Y.
    • Journal of the Korean Magnetics Society
    • /
    • v.14 no.5
    • /
    • pp.186-191
    • /
    • 2004
  • The variation of magnetic properties with insulating materials(glass frits, talc and polyamide) in compressed powder cores composed of Fe$\sub$73.5/Cu$_1$Nb$_3$Si$\sub$15.5/B$\sub$7/ nanocrystalline alloy powders(size: 250~850 $\mu\textrm{m}$) and 3 wt% insulators has been investigated. Larger permeability was obtained at the frequency lower than 300~400 kHz for the powder cores including ceramic insulators(glass frits and talc) as compared to the cores with polyamide, while at higher frequency than 1 MHz the permeability of the former cores decreased rapidly. Further the cores with ceramic insulators showed larger core loss and smaller peak quality factor attained at lower frequency. On the contrary, the powder cores with polyamide exhibited high stability of permeabilities up to several MHz and superior core-loss and quality-factor properties. Moreover the dc bias property was better in the wide field range for the cores having polyamide. The enhanced magnetic properties of polyamide-added cores were attributed to the more sufficient electrical insulation between magnetic particles, where the higher insulation state was considered to be obtained from the larger volume fraction of polyamide in the powder cores.

EXPERIMENTAL STUDIES ON THE EFFECT OF RLN ANASTOMOSIS REMOVAL ON PHONATION (반회신경 문합과 후윤상피열근 절제가 발성기능에 미치는 영향에 대한 실험적 연구)

  • 김영모;이영구;이정식;이준열;김광문;김기령;홍원표;최홍식
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1991.06a
    • /
    • pp.11-12
    • /
    • 1991
  • 편측 성대마비의 음성개선을 위하여 현재까지 알려진 치료방법은 teflon 또는 silicone 주입술, 외과적 성대 내전술, 갑상연골 성형술, 신경재식술, 등이 있으며, 근래까지는 Teflon 또는 Gelform 주입술이 제일 효과적인 방법이라 알려져 있으나, 이는 음의 높낮이 조절능력의 한계가 있고, 신경재식술의 결과 역시 만족스럽지 못한 경우가 많다. 따라서 저자는 발성기능의 생리학적인 측면에서, 보다 효과적인 음성개선의 방법을 찾기 위하여, 사람의 후두와 비교적 유사한 특성을 가진 개를 사용하여 실험을 하였다. 반회신경을 절단하여 편측 성대 마비를 유발한 뒤, 동측의 유일한 외전근인 후윤상피열근을 절제후 절단된 신경을 문합하여, 성대의 외전근 작용의 소실과, 발성시에 주로 작용하는 내전근만의 작용을 유도하여, 공동운동의 차단과, 내전운동의 향상을 기대하였다. 본 실험에 앞서, 임의적으로 신경을 자극시킬 수 있는 신경자극기와, 주위조직으로부터 신경만을 분리하여 자극할 수 있는 전극을 개발하여 사용하였으며, 또한 성대의 발성음을 임의대로 유발시킬 수 있는 생체 내 후두발성 모형(in vivo laryngeal phonation model)을 Moore(1987, 1988)등이 발표한 모형을 토대로 자체 개발하여 사용하였다. 실험은 13마리의 개를, 반회신경 절단군(3 마리), 반회신경 절단 및 후윤상피 열근 절제군(3 마리), 후윤상피열근 절제군(3 마리), 반회신경 문합 및 후윤상피 열근 절제군(4 마리)등으로 나누어 실험하였으며, 3 개월 후, 현수후두경, 후두 내시경, videolaryngoscopy, 신경자극 검사 등으로 성대의 내전운동 및 위치 변화의 관찰, 발성음의 음향분석 및 갑상피열근의 형태학적 변화를 관찰하여 다음과 같은 결과를 얻었다. 1. 반회신경 절단군과 반회 신경 절단 및 후윤상피열근 절제군은, 수술후 3 개월에 성대의 움직임이나 각도의 변화가 없었으며, 음향분석 결과 발성음이 아닌 잡음만이 포착되었다. 즉, 절단된 신경의 문합 없이 후윤상피열근 절제 만으로는 음성개선은 기대할 수 없었다. 2. 후윤상피열근 절제군에서는 수술 후 3 개월에 정상적인 성대의 내전운동이 관찰되었으며, 음향분석상 기본주파수 동요율 및 발성음의 강도는 약간의 증가를 보였다. 즉, 반회신경이 절단되지 않은 상태에서 후윤상피 열근 만을 절제하면, 발성음의 변화는 거의 없었다. 3. 반회신경을 절단후 문합하고 후윤상피열근을 절제한군 에서는 수술후 3 개월에, 성대의 정상적인 내전운동을 보였고, 음향분석상 수술직후에는 잡음만이 포착되었으나, 3 개월 후에는 잡음이 아닌 발성음을 들을 수 있었으며, 이 발성음의 기본주파수 및 강도는 수술전보다 감소되어 있었으나, 기본주파수 동요율은 증가되어 있었다. 즉 이 술식으로 인한 뚜렷한 발성음의 향상이 있었다. 이상의 결과로 미루어, 편측 신경 절단으로 인한 성대마비시, 절단된 신경을 봉합하고 성대의 유일한 외전근인 후윤상피열근을 절제하면, 공동운동의 차단과, 내향운동의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다.

  • PDF