• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.31-38
• /
• 2014

This study makes three apartment building complex an object of analyzing representative building types and energy consumption rate of house holds, and effect of outdoor air cooling. Recently created apatrment complex is composed of very various types of building, plan, and orientation etc. But, it is difficult to remark conclusively that these various types of buildings are designed energy-effectively. Because architects are hard to find useful energy design guideline for decision making. By the preceding study, the present condition and problem about this subject is grasped, apartment building types were examined and representative types were extracted. In this study, energy simulation was conducted, and the effect to outdoor air cooling was analyzed about representative types of the subject apartment complex. It is expected that this analysed results will be basic data for the more integrated study. Research consequence can be summarized as follow: 1) Besides solar gain, household layout of building, orientation, and plan etc. effects compositively on energy consumption rate. 2) The effect of ourdoor air cooling in building of tower type can be improved by arranging households appropriately.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.1
• /
• pp.96-105
• /
• 2013

This study aims to investigate the energy performance of apartment in respect of complex design, building type and generation house layout and finally to produce the guide line for energy saving design. To grasp the present condition and problem about this subject, apartment building types were examined and representative types were extracted. Considering azimuth angle, private area, and generation number, building type of the subject apartment was classified in detail, energy simulation was conducted, and the effect to energy cost was compared. In the research, using VE energy simulation program, the heating and cooling load were calculated and converted to energy cost. It is expected that this analysed results will be basic data for the more integrated study. Research consequence can be summarized as follow: 1) Energy cost is compared according to several azimuth in plank '一' type apartment. As the results, calculated gas cost is the best in $49^{\circ}$, but total cost is in $-31^{\circ}$. 2) Apartment buildings of tower types are compared, it is resulted that 'Y' type (azimuth $-7^{\circ}$, $-20^{\circ}$) is the best in gas cost, but the total cost is worst because of high cooling load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1450-1460
• /
• 2015

This study is to analyze various methods of block design elements applied in the recent apartment housing design competitions for Sejong city. It is expected to find the new design trend and good design characteristics of apartment building forms to use as the basic data of apartment housing design, because it is a case study on the ambitious design competition of the city that many major architectural firms in Korea entered and eager to propose new ideas. The results of this study are following : (1) The forms of slab block are classified into 8 types(the best applying one is ㄱ type). The forms of point block are classified into 9 types(the best applying ones are ㅁ, L and - type). (2) For the shapes of core, the forms of opposite core are classified into 6 types, the forms of parallel core are 3 types. (3) The forms of roof are classified into 4 types. The flat type is applied to 95 percent of the total cases. (4) The shapes of block mass are classified into 5 types(the best applying ones are general and void type), facade forms are 3 types(the best applying one is horizontal division type).

• Journal of the Korean housing association
• /
• v.15 no.1
• /
• pp.185-194
• /
• 2004

This paper deals with the spatial configuration of the unit floor plan based on the apartment building type. It is generally agreed that various apartment building types were organized by diverse apartment unit floor plan. The reason behind this diversity, apartment unit plan are affected by the environmental condition and the diverse spatial composition of the unit floor plan. Apartment building types were classified by the similarity of the justified-graph type. This types classified into two category; One core type which were classified by the shape of the core, and multiple core type which were compounded by more than two core. These categories divided into 5 types, and 2 types. Each types were compared in view of the mean depth, relative asymmetry, integration value. Consequently, these types could be classified in the number of the unit floor plan. It is profitable to 3 unit types which was analyzed in view of an indicator of the spatial configuration. Therefore, 3 unit types is favorable to the composition of the apartment building types.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.121-129
• /
• 2007

This study aims at analysing the daylight condition of the existing and the newly planned apartment complex due to the azimuth angle, and throughout that result, presenting the necessity of new concept of architectural law for apartment complex design in the matter of daylight condition. For this purpose selecting one apartment complex which showed typical shape of '=' or 'ㅁ', 3D daylight analysis was applied for the existing condition. And then after new complex was planned according to the architectural law, additional 3D analysis on the daylight with the various conditions were accomplished. This 3D analysis for daylight condition can give accurate results and design direction which are suitable for the new complex plan of apartment houses.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.47-58
• /
• 2007

The usage of Integral abutment bridges has been increased worldwide because of reducing bridge maintenance costs and resisting seismic loads. Although these attributes make the integral abutment bridge an increasingly popular choice, back-abutment interaction issues remain unresolved. Hence, the earth pressure behavior of an integral abutment bridge having 90 m long PSC beam bridge for the first time in Korea was analyzed by conducting long term monitoring in this study. Based on this study, the results were as follows; the ratio of maximum passive movement to the abutment height (H) of 0.0027 and the maximum passive earth pressure coefficient of 4.8 were developed at 0.82H from the bottom of the abutment during summer season. During winter season, the ratio of maximum active movement to H of 0.0011 and the maximum active earth pressure coefficient of 0.7 were developed at the same location as in summer season. The new earth pressure distributions having a trapezoid type were proposed based on this study.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.515-517
• /
• 2008

현재 가동 중인 원자적발전소 계측제어설비의 전원공급기를 살펴보면 인버터 또는 별도의 교류를 입력전원으로 사용한다. 직류 전원공급기들은 설비의 중요도예 따라 이중화로 구성된 설비도 있고 그렇지 않은 기기나 설비도 있다. 이중화로 구성된 전원공급기라 해도 교류 입력전원이 동일하다면 교류 입력이 상실될 때 이중화로 구성된 직류전원도 상실되어 관련계통의 가동이 정지된다. 이러한 문제점을 해결하기 위해서는 각기 다른 교류입력전원으로 동작되는 이중화전원공급기로 구성되는 것이 가장 바람직하다. 본 연구개발의 목적은 두 종의 설비에 소요되는 3종의 직류전원 공급기를 원자력 안정성등급으로 국산화하는 연구이다. 기존 제품들은 3종 모두 리니어 방식의 제품이지만, 방사선감시 계통 현장제어기의 5V로직 전원공급기와 공정제어계통 전원공급자는 전력변환효율이 높고 소형, 정량화가 가능한 SMPS(Switched Mode Power Supply) 방식으로 개발하였다. 방사선감시계통 현장제어기의 PCA(Printed Circuit Assembly) 저전압공급기는 다양한 종류의 출력전압과 저 전류형이므로 안정성 면에서 동일한 형식의 리니어 방식으로 개발하였으며 3종류 모두 출력용량을 20% 이상 향상시켰다. 또한, 논문을 통해 SMPS 방식의 전원공급기의 핵심 부품인 Control Module을 Hybrid IC형으로 자체 설계하여 성능이 우수한 제품을 지속적으로 생산할 수 있는 기틀을 마련하고자 한다.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.235-243
• /
• 2008

Construction projects have unique characteristics that these may be carried out by contractors thus, cost should be estimated before execution. The importance of cost estimation and cost check has become increasingly emphasized in all phases of construction project that would be performed numerously. It is needed that owner have to estimate reasonable budget, and contractor should predict the bid price. However, there are lack of standard cost estimation method before quantity takeoff, cost analysis method, and cost database thus, the method of area cost, such as square foot method, is as used as ever in Korea. Therefore, this research suggested standard cost database structure CUBE, and analysis method of item quantity per one household categorized by area type. Whereafter, database of all item quantity of finish work has been built with 90 building cost data, and validated it's availability. In this respect, the suggested method and the findings from this research are expected to help enhancing the efficiency and productivity of cost estimation in Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.4
• /
• pp.510-516
• /
• 1995

A multidisciplinary weight control program was conducted for obese women. The major components of the program included low calorie diet therapy, exercise, behavior modification and nutritional education and counseling. Sixteen healthy volunteers in excess of body fat, above 30%, were enrolled in the group support program. But 5 person were dropped out in the 2nd week of treatment. During the 1st week of group orientation, individual cause of obesity was assessed through a computer program including survey of dietary intake, activity, eating habits and life styles. During the 5 weeks of treatment, 4.8kg of average weight loss was accomplished using a following program ; low calorie diet(1200kcal/day with all essential nutrients), low impact aerobic exercise(50~60% of $VO_{2max}$, 1 hour/day in a group, 3~5 days/week), behavior modification of individual life styles and eating habits causing obesity and nutritional education concerning nutrition, role of exercise such as brisk walking, importance of slow eating in regular meal pattern and internal motivation for weight reduction, health risk of obesity and rapid weight loss, weight recycling and yo-yo syndrome, etc. Nutritional conseling was conducted 3 times per week with checking self-records of foods, activity, emotional state and tiredness. Before and immediately after 5 weeks of treatment, blood pressure, fasting blood glucose, cholesterol and triglyceride were measured and comparied with paired t-test. After 5 weeks of treatment, body weight, body mass index, body fat and circumferences of waist, upper arm and hip were significantly decreased. Also LDL-cholesterol was significantly decreased after obesity treatment.