• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.434-440
• /
• 2013

Generally, the envelope of a freeform building is composed of a structure made with rectangular or C-shaped steel pipe, and steel or aluminum panel finishes on the structure. However, these construction methods increase material loss and cost and time. There are also numerous cases of misunderstanding of design and difficulties in construction, which frequently cause construction errors. Such construction errors decrease construction productivity, resulting in poor construction quality and the need for rework, as well as cost and time overruns. To solve the problem, this study proposes a 3D coordinate control technology for freeform structure implemented through a CNC(Computerized Numerical Control) Twisted tube method, and by extension, develops a BIM-based envelope construction method for freeform building.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.275-280
• /
• 2013

In this paper, a new stereo object extraction algorithm using a block-based MSE (mean square error) algorithm and the configuration parameters of a stereo camera is proposed. That is, by applying the SSD algorithm between the initial reference image and the next stereo input image, location coordinates of a target object in the right and left images are acquired and then with these values, the pan/tilt system is controlled. And using the moving angle of this pan/tilt system and the configulation parameters of the stereo camera system, the mask window size of a target object is adaptively determined. The newly segmented target image is used as a reference image in the next stage and it is automatically updated in the course of target tracking basing on the same procedure. Meanwhile, a target object is under tracking through continuously controlling the convergence and FOV by using the sequentiall extracted location coordinates of a moving target.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.508-517
• /
• 2005

This paper describes a high performance voltage controller for 3-phase 4-wire UPS (Uninterruptible Power Supply) system, and proposes a new scheme of synchronous reference frame controller in order to compensate for the voltage distortions due to unbalanced and nonlinear loads. Proposed scheme can eliminate the negative sequence voltage component due to unbalanced loads and also reduce the harmonic voltage component due to non-linear loads, even when the bandwidth of voltage control loop is a very low. In order to compensate for the effects of unbalanced loads, the synchronous reference frame controller with the positive and negative sequence computation block is proposed, and the synchronous frame controller with a bandpass filter is proposed to compensate for the selected harmonic frequency of output voltage. The effectiveness of the proposed scheme has been investigated and verified through computer simulations and experiments by a 30kVA UPS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.363-370
• /
• 2014

A new NURBS-based shape optimization method is proposed. Most shape optimization studies consider only control point positions as design variables. Some shape optimization processes present problems with mesh quality and convergence when control points are constrained to a limited space. If the weights of the control points are regarded as additional design variables, it should be possible to attain a better degree of shape control. In this study, positions and weights of NURBS control points are used as design variables, and a shape optimization algorithm incorporates position optimization and weight optimization steps. This method is applied to shape optimization benchmarking problems to verify its advantages.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.476-479
• /
• 1999

일반적으로 3상 PWM AC/DC 컨버터는 정상상태 에러 제거 및 빠른 과도응답 특성을 얻기 위해 동기 좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전원이 불평형인 경우 입력전류와 출력전압에 고조파 성분이 나타나게 된다. 본 논문에서는 전원전압을 동기좌표계상의 정/역상 분으로 분석한 후 두 축(D, Q)의 역기전력 보상성분을 전원전압의 상태에 따라 적절하게 가변하고, 무효 전력과 고조파 전력 성분을 선택적으로 제거함으로써 입출력 시스템의 역률 및 고조파 성분을 효과적으로 보상하기 위한 간단하면서도 효과적인 제어기법을 제안하고, 시뮬레이션과 실험을 통하여 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.961-964
• /
• 2016

This paper describes the implementation of AUSV system for Sonar Image acquisition. The system be controlled by FF-PID algorithm for the thrusters using motion sensor and DGPS. As experimental results, the control performance is that the error distance from the destination positions are under 5m in total survey track of 1km, and the image deviation is under 12 pixel from the manned survey method, which the comparison with the total image quality is almost the same as the manned survey one. Thus the AUSV system is a new method of system can be utilized on the limited survey area as the surveyor should not be able to approach on sea surface.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.55-63
• /
• 1996

In this paper, a vector control system is implemented to drive CRPWM inverter fed induction motor. The rotor flux is estimated using the rotor coordinates flux model and the stator coordinates ramp comparison controller is used as a current controller. The microcontroller 80C196 is used for the computation of the estimation of the rotor flux, the speed controller, the flux controller, the vector rotation, and the phase transformation The current controller is implemented using the analog circuit in order to reduce the burden of the microcontroller. For the proposed system, the digital simulation is performed to examine the feasibility and the superior characteristics of the current controller and the system transient response is verified through the experiment.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.353-354
• /
• 2008

본 논문에서는 GPS, Bleutooth 모듈을 사용하여 이동로봇의 군집이동에 관한 연구를 다루었다. 로봇 통신 모델로는 특정한 수신자가 정보를 받을 것을 기대하지 않고 통신가능 범위 안으로 들어왔을 때 상대방에게 정보를 보내는 방법인 사인보드 모델을 선택하였다. 군집간 제어를 위한 총 3대의 실외 이동을 로봇제작과 로봇의 좌표인식, 방향을 찾기 위해 GPS수신 모들과 Bluetooth 송 수신기를 사용하였다. 실험에 쓰인 모든 이동용 로봇에 GPS수신기와 Bluetooth 송 수신기를 장착하였고, GPS수신기로부터 받은 Master-이동로봇의 위치좌표를 Bluetroth 통신 영역 내에 있는 모든 이동로봇에게 송신을 한다. 각 Slave-이동로봇을 Master-이동로봇으로부터 받은 위치 좌표로 로봇간의 거리와 방향을 계산하며 이를 토대로 군집 로봇의 이동 알고리즘을 구현하였다. 본 논문에서는 군집간 제어를 위해 군집 로봇 시스템을 제작하였으며 상대적인 위치, 거리 유지, 진행방향을 계산한다. Master-이동로봇과 Slave-이동로봇 간의 1:N 실시간 통신과 일정거리를 유지함으로써 군집간 제어를 하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.81-89
• /
• 1998

In the field of industrial drives, the vector control of the induction motor has been widely used to achieve the good control performance. In this paper, to require the information of rotor flux in direct vector control scheme, the flux observer by current model of rotor circuit is used. This flux observer is not only available at low-speed region bt good for the error reduction by feedback properties. Also, employing the flux observer on rotor reference frame, the robustness of decoupling control to the observation of rotor flux can be achieved. Through digital simulation and DSP-based IGBT inverter system, the validity for practical implementation is verified.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.208-211
• /
• 2003

본 논문에서는 비선형 단상부하에 의해 발생하는 전류 고조파를 보상하기 위한 단상능동전력필터의 제어방법을 제안한다. 측정된 부하전류에 시간지연을 주어 가상의 두 번째 상을 만들어서 단상시스템을 두 축을 갖는 시스템으로 만들어 복소계산이 가능하게 한다 기존의 방법과 달리 저역통과필터의 지연특성을 고려하여 필터를 통과한 지연된 위상을 가진 정현파를 가상의 상으로 이용하였다 두 개 의상이 존재하므로 순시로 무효전력을 구할 수 있게된다. 본 논문에서는 회전좌표계를 사용하여 순시계산을 하였고, 부하전류만을 검출하여 보상전류 지령치를 구하였다. RL부하에 대한 실험을 수행하였고, 이러한 실험을 통하여 제안된 제어법의 유효성을 입증하였다.