• Title/Summary/Keyword: 종단경사

Search Result 99, Processing Time 0.022 seconds

Measurement of Tunnel Arch Settlements Ahead of and Behind the Tunnel Face Using a Horizontal Inclinometer and Settlement Pins (수평경사계와 천단침하계에 의한 터널막장 전후방의 천단침하 계측)

  • Kim, Cheehwan
    • Tunnel and Underground Space
    • /
    • v.23 no.2
    • /
    • pp.120-129
    • /
    • 2013
  • It is important to measure the displacement behind and ahead of a tunnel face during construction for evaluating mechanical stability by comparing it to a displacement criteria set by tunnel designers. The 30 m long horizontal inclinometer was installed frontward from the tunnel face and the displacement occurred ahead of a tunnel face during excavation was measured by using it. Tunnel arch settlements behind tunnel face were surveyed using a settlement pins on the arch. So total settlement and longitudinal displacement curve were obtained combining settlement measured by both the horizontal inclinometer ahead of tunnel face and the settlement pins behind the tunnel face.

Sight Distance at Crest Vertical Curves Under Consideration of Construction Errors (볼록형 종단곡선에서 시공오차를 고려한 정지시거에 관한 연구)

  • Lee, Myeong-Han;Kim, Dong-Nyong
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.8 s.86
    • /
    • pp.153-162
    • /
    • 2005
  • This study is carried out to evaluate the sight distance change due to construction errors of vertical crest curves. Various design speeds and grades as well as various size of construction errors are incorporated in this study. After showing theoretical methodology numerical results are compared and analysed for the given ranges of parameters. New vertical curve change rate(m/%) is suggested to guarantee minimum sight distance under construction errors. As to the results, the reduction of sight distance are $2.8{\sim}21.3m$ at 120km/h, $2.0{\sim}15.1m$ at 100km/h, $1.4{\sim}10.6m$ at 80km/h, $1.0{\sim}7.5m$ at 60km/h $0.5{\sim}3.9m$ at 40km/h. Vortical curve change rates need to be increased about $6{\sim}25%$ to provide minimum stopping sight distance according to design speed.

Design of Road Surface Drainage Facilities Based on Varied Flow Analysis (부등류 해석을 기반으로 한 노면배수시설 설계)

  • Ku, Hye-Jin;Kim, Jin-Soo;Park, Hyung-Seop;Jun, Kyung-Soo
    • Journal of Korea Water Resources Association
    • /
    • v.41 no.12
    • /
    • pp.1173-1185
    • /
    • 2008
  • The design methods of the road surface drainage facilities were compared for the improvement of design method. We have developed four computational design models classified by the methods to determine the duration of design rainfall and to analyze the flow of a linear drainage channel. The critical duration was determined by assuming the critical duration to be 10 minutes or by finding the duration of design storm being similar to the travel time of flow by trial and error. The flow of a linear drainage channel was analyzed as the uniform flow or the varied flow. The design models were applied to the artificial road surface drainage facilities with various channel slopes and road shoulder slopes. If the rainfall intensity of the 10 minutes duration was applied, the outlet spacing obtained from the design based on the varied flow analysis was larger than the uniform flow analysis only when the channel slope and the road shoulder slope was small. On the other hands, if the duration of design rainfall was determined by calculating the travel time, the varied flow analysis brought about larger outlet spacing than the uniform analysis for all conditions. However, the model of the critical duration concept and the varied flow analysis resulted in smaller outlet spacing than the current design method employing the rainfall of 10 minutes duration and the uniform flow analysis.

Analysis of Driving Conditions and Traffic Accidents in the Case of Trumpet Interchange Ramps (트럼펫 IC 램프의 운전조건과 교통사고 분석)

  • Kim, Tae-Yeong;Park, Byeong-Ho
    • Journal of Korean Society of Transportation
    • /
    • v.25 no.1 s.94
    • /
    • pp.73-79
    • /
    • 2007
  • This study deals with traffic accidents at the ramps of trumpet interchanges. The purpose of the study is to analyze the relations between tke turning direction of ramps (and combinations with other factors) and traffic accidents. In Pursuing this analysis, this study gives particular attention to the combination of turning direction and grade and the combination of turning direction and radius of curvature in the case of the trumpet interchange ramps. The null hypothesis tests show that the average accident number and average accident rate ate rejected at the 90% and 95% significance level respectively Also. the null hypothesis tests show that the combinations or turning direction and Evade as well as turning direction and radius are all rejected at the 95% significance level. In summary, right turn movements ate more dangerous than left turns on the trumpet interchange vamps. Also, ramps with a right turn and up grade or with a left turn and radius more than 200m have more traffic accident Potential than other types of ramps.

Longitudinal Deformation Profile in Tunnel using Measured Data (계측자료를 이용한 터널의 종단변형도)

  • Jang, Won-Yil;Yang, Hyung-Sik;Chung, So-Keul
    • Tunnel and Underground Space
    • /
    • v.18 no.5
    • /
    • pp.338-342
    • /
    • 2008
  • Longitudinal deformation profile(LDP) has been obtained mostly by numerical analysis. In this study, LDP was plotted by measured data from horizontal inclinometer and crown settlement. Deformation of foe ahead was determined by comparing to the maximum deformation point and deformation of after excavation was determined by regression of the measured crown settlement data. The result shows that crown deformation began as f3r as 3D ahead of the face. Crown settlement at the face was 40% of ultimate deformation, which was 10% higher than numerical results, and the deformation converged after excavation of 4D.

Experimental investigation of depositional patterns of debris flow (횡단 배수로 내 토석류 퇴적 양상의 실험 연구)

  • Kim, Young-Il;Paik, Joong-Cheol
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.38-42
    • /
    • 2011
  • 토석류는 산간지역에서 발생할 수 있는 가장 위험한 자연재해 중 하나로 입자-유체 혼합물인 토석류가 중력에 의해 매우 빠른 속도로 이동하는 현상을 의미한다. 산간지역에서의 토석류 발생은 도로의 횡단 배수 구조물의 통수능을 저하시키게 되며 그 결과 도로의 유실 등 막대한 피해를 발생시킨다. 잠재적인 토석류 발생 지역에서의 피해 저감을 위해서는 진보된 설계 기준이 마련되어야 하며 이를 위해 토석류의 횡단 배수구조물 내에서 토석류의 동적 거동 특성을 파악하는 것이 선행되어야 할 것이다. 이번 연구에서는 수리 실험을 통하여 횡단 배수구조물 내에서 토석류의 퇴적 특성을 파악하고자 한다. 수리 실험 장비는 폭이 일정한 사각형 수로로 접근 수로와 하류부 수로로 구성되어 있으며 접근수로의 상단부에서 일정한 유량의 토석류를 연속적으로 유입시켜 경사가 급변하는 하류부 수로 내에서의 토석류 퇴적 특성을 파악하였다. 실험 결과로 토석류의 거동 특성은 토석류의 체적 농도, 입자의 특성, 그리고 접근수로와 하류부 수로의 바닥 경사에 종속됨을 정량적으로 알 수 있었다. 또한, 토석류의 체적 농도나 수로 바닥경사 등과는 상관없이 토석류의 퇴적은 하류부 수로의 종단부인 자유 낙하 지점에서부터 시작되었고 시간이 경과함에 따라 퇴적 지점이 접근 수로 쪽으로 이동하며 퇴적량이 크게 증가하는 현상을 보였다. 이 때, 하류부 수로 내 퇴적된 토석류는 약 $12{\sim}15^{\circ}$의 경사를 보였다.

  • PDF

Assessment Method for Potential Risk and Channel Stabilization in River Confluence (하천 합류부 재해 위험성 및 하도 안정성 평가 기법 정립)

  • Lee, Samhee;Yoon, Hyeoncheol;Lee, Duhan;Lee, Sangcheol
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.56-56
    • /
    • 2016
  • 하도 안정성에 민감하게 반응하는 대표적 하천 구역은 본류와 지류의 합류부이다. 이와 같은 합류부에서는 흐름과 하상변동 양상이 상대적으로 복잡하다. 이는 본류 및 지류 간 유사이송량, 유황, 흐름, 하도경사 등 수리특성이 서로 다르기 때문이다. 지류 합류부에서는 지류 자체의 하상 변동 영향뿐만 아니라 본류의 하상변동으로부터도 직 간접적으로 영향을 받는다. 즉 본류에서 자연적이든 인위적이든 어떤 원인으로 말미암아 하상저하가 갑자기 일어나면 지류의 하도 종단경사 변화가 현저하게 일어나는, 이른 바 두부침식 현상이 발생하기도 한다. 한편 본류와 지천 사이 흐름특성 유사거동 특성이 서로 다르기 때문에 합류뷰 주위에 지속적인 국지퇴적이 야기되기도 한다. 합류부에서 이와 같은 침식 또는 퇴적 현상으로 말미암아 하천관리상 여러 문제점을 야기한다. 이에 따라 지류 합류부에서 하천경사를 일정하게 유지하기 위하여 하상유지공 설치 등 적절한 하도안정화 대책을 모색해야 한다. 따라서 본 연구에서는 기존의 하천정비기본계획에서 현안의 분석을 통해 개선 방안을 제시하였으며, 국가 및 지방 하천 3,836 개소에 대한 합류부 도상과 일부 현장 조사를 실시하였다. 조사?분석 결과를 바탕으로 합류부의 재해 유발 지표를 도출하고 전문가로부터 의견 수렴을 통해 가중치를 부가하여 합류부 재해 위험성 및 안정성 평가 기법을 정립하였다. 그 동안 관련 부처 및 지자체에서 하천계획을 수립하는 데, 중점 정비 및 관리가 필요로 하는 합류부를 선정 시 그 기준이 모호하였다. 그러나 본 연구에서 정량적으로 정립한 기준은 하천 합류부의 재해 위험성을 평가할 수 있어 고도의 하천관리를 지향할 수 있는 계기를 마련하였다.

  • PDF

Development of Bicyclists' Route Choice Model Considering Slope Gradient (경사도 에너지 소모량을 고려한 자전거 경로 선택 모형 개발)

  • Lee, Kyu-Jin;Ryu, Ingon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.19 no.3
    • /
    • pp.62-74
    • /
    • 2020
  • Although the government and local governments devote efforts to activate bicycles, they only access to the supply infrastructure such as bike lanes and the public bicycle rental service centers without considering the measures to overcome the geographical constraints of slope. Therefore, this study constructs bicyclist's energy consumption estimation model through experimental methods of slope gradient and heart rate measurement and suggest the bicycle route choice model which could minimize the energy by the slope gradient. After calculating the RMSE of the estimated energy consumption by applying this model to the simulation section, it is confirmed to be 41% better than the model which does not reflect slope gradient. The results of this study are expected to be applied to the bicycle infrastructure planning that considers both longitude and transverse of bike lanes and the algorithm of bicycle route guidance system in the future.

A Study on the Cause of Death Accident between Cental & Southern Area Highways using Logistic Regression Analysis (로지스틱 회귀분석을 이용한 중부·남부 고속도로별 사망사고 원인 분석 및 비교에 관한 연구)

  • Yoon, Byoung-Jo;Baek, Jun-Hyouk;Yang, Sung-Ryong
    • Proceedings of the Korean Society of Disaster Information Conference
    • /
    • 2017.11a
    • /
    • pp.209-210
    • /
    • 2017
  • 본 연구는 고속도로 40개선을 중부 남부 그룹으로 나누어 종단경사, 월별, 가해자연령구간 측면에서 사고 특성을 파악함으로써 유의하게 지역별 고속도로 사망사고를 높이는 요인을 분석하고자 했다. 조사된 노선 중 88올림픽선, 남해선, 호남선, 울산선 등을 포함한 18개 고속도로 노선을 남부 그룹으로, 경인선, 영동선, 서울외곽순환선 등을 포함한 11개 고속도로 노선을 중부 그룹으로 나누어 비교 분석 결과는 다음과 같았다. 고속도로에서의 사망사고 주요 원인의 비율 1위 과속, 2위 주시태만으로 비슷했으나 남부 고속도로 그룹은 요인 중 졸음에만 유의했다. 중부 고속도로 그룹에서도 졸음 시 유의하게 나타났으며 남부보다 오즈비가 1.22배 높게 나타났다. 추가로 중부 고속도로 그룹에서 주시태만(오즈비 1.477), 운전자기타(오즈비 0.347)이 유의하게 도출되었다.

  • PDF