• Title/Summary/Keyword: 조파

Search Result 513, Processing Time 0.025 seconds

Functional Improvement of Floating Breakwaters with Long Wave Kinetics (장주기 및 유동성분을 고려한 부유식방파제의 방파성능 개선)

  • Yoon, Jae-Seon;Cho, Yong-Sik
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.1
    • /
    • pp.93-99
    • /
    • 2011
  • In this study, a series of laboratory experiments are carried out to analyze fluid behaviors around multi-arranged (2 pieces) floating breakwaters with various parameters such as distance between structures, wave periods and steepness. The rate of wave transmission is shown to be affected directly by wave periods of incident waves and the breakwaters with multi-arranged structures show the highest rate of wave protection compared with other cases. The velocity fields around the breakwaters are measured by using the Laser Doppler Velocimetry system. The transmission coefficients are also measured in laboratory experiments. Finally, laboratory observed data are compared with numerical experimental results and analyzed in detail.

A Study on Initial Wave Breaker by Using MPS and Stereo Vision Technology (입자법과 스테레오 비전을 활용한 초기 쇄파 장치 연구)

  • Kim, Kyung Sung;Yu, Sunjin
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.2
    • /
    • pp.201-206
    • /
    • 2019
  • The flooding and overtopping due to unexpected large ocean wave may occur serious problems to environments and structures. Generally fixed wave breakers and several structures were installed to prevent such damages, however, they may affect to environments and charted path of ships badly. In this regard, new type of initial wave breaker was investigated in both of experimentally and numerically. For the experiments, conceptual devices were built by authors with stereo vision system. The moving particle semi-implicit method was adopted for simulation. It is revealed that the initial wave breaker reduce the damages from ocean waves by energy dissipated earlier. Furthermore, the effects of position of the initial wave breaker was also considered.

Transition of Rice Cultural Practices during Chosun Dynasty through Old References. III. Differentiation of Rice Varieties in the Dynasty (주요 고농서를 통한 조선시대의 도작기술 전개과정 연구 III. 조선시대의 벼 품종 분석)

  • Lee, Sung-Kyum;Guh, Ja-Ok;Lee, Eun-Woong;Lee, Hong-Suk
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.4
    • /
    • pp.370-381
    • /
    • 1991
  • In Nongsajiksul, rice varieties were not appeared but varieties groups were introduced and divided according to growth periods, or 'Sun, Gang, Na'or introduced names of some of local varieties. However, the weather conditions for rice culture in Korea were characterized by 'early drought and late flooding', and winds and rains in summer, so that rice safe harvest by avoiding these disasters was the most important. Thus, development of rice varieties after the 15th century has gradually been adapted for ‘early-seeding and early-harvesting’, and for disaster tolerance. With time, rice varieties, which were early maturing, had awned, had color on panicles, had tolerance for grain shattering, had tolerance for winds, and had good responses to fertilizers, were grown in large areas.rown in large areas.

  • PDF

Review of Newman-Sharma Wave Pattern Resistance Analysis Using Experimental and Computational Model Tests of KCS (KCS 선형의 모형시험 및 CFD 해석을 통한 Newman-Sharma 파형저항 추정법의 검토)

  • Myoungsoo Kim;Minchang Kim;Jeonghwa Seo;Woochan Seok
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.60 no.2
    • /
    • pp.76-85
    • /
    • 2023
  • The present study aims to review the wave pattern resistance analysis method suggested by the International Towing Tank Conference. From the experimental database of a container carrier ship model, the wave pattern measurement and resistance test results are utilized. The wave pattern resistance at the design Froude number is obtained to be compared with the wave making resistance of experiments. Wave pattern resistance is lower than wave making resistance by 1978 ITTC and uniform regardless of transverse location of wave cut. The method is also applied to the wave height field by Computational Fluid Dynamics (CFD) analyses with Froude number variation. Although numerical damping suppressed waves in downstream, waves around the hull and wave pattern resistance are properly predicted.

On numerical analysis for tsunami run-up on slope beach (경사 해빈에서 지진해일 처오름에 관한 수치적 고찰)

  • Lee, Woo-Dong;Kim, Taeyoon;Hwang, Taegeon;Ko, Chanhyun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.83-83
    • /
    • 2022
  • 여러 분야의 연구자들이 지진해일의 위험에 대한 경각심을 가지고, 지진해일의 발생, 전파 그리고 수리현상을 해석하기 위해 많은 노력을 기울이고 있다. 해안지역에서 직접적인 피해를 입히는 지진해일의 충격파, 처오름, 월파, 침수 등에 관한 연구에 유사한 파형 특성을 가진 고립파를 많이 사용한다. 고립파는 비선형성과 분산이 균형을 이루는 가정에서 Korteweg-de Vries(KdV) 방정식을 만족하는 안정적인 이론파이다. 고립파의 파형분포는 수심에 의해 결정되고, 일정 수심 이상에서는 지진해일을 대신해 사용할 수 있다. 그러나 수심이 낮은 천해에서는 주기와 파장이 비현실적으로 짧아짐으로 지진해일을 대신하기에는 무리가 있다. 본 연구에서는 지진해일의 처오름 특성을 분석하기 위한 1:20 불투과성 경사면이 포함된 수치파동수조를 구성한다. 먼저, 일본 NOWPHAS(Nationwide Ocean Wave information network for Ports and HArbourS)의 관측자료를 이용하여 2011 동일본 지진해일과 고립파의 파형분포를 비교한다. 그리고 다양한 파형의 지진해일 생성할 수 있게 개발된 조파방법을 수치파동수조에 도입하여 수치해석을 수행한다. 수치해석결과, 지진해일의 처오름 높이가 고립파에 비해 최대 1.8배, 최소 1.13배, 평균 1.56배 증가한다.

  • PDF

Study for the Development of an Optimum Hull Form using SQP (SQP법을 이용한 최적선형개발에 대한 연구)

  • Choi, Hee-Jong;Lee, Gyoung-Woo;Yun, Soon-Dong
    • Journal of Navigation and Port Research
    • /
    • v.30 no.10 s.116
    • /
    • pp.869-875
    • /
    • 2006
  • This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verity the validity of the developed program the numerical calculations for Wigley hull and Series 60( $C_B=0.6$) hull have been performed and the results obtained by the numerical calculations have been compared with the original hulls.

Study on the Broadband RF Front-End Architecture (광대역 RF 전단부 구조에 관한 연구)

  • Go, Min-Ho;Pyo, Seung-Chul;Park, Hyo-Dal
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.4 no.3
    • /
    • pp.183-189
    • /
    • 2009
  • In this paper, we propose RF front-end architecture using hybrid conversion method to receive broadband signal. The validity is verified by design, fabrication and experiment. The proposed RF front-end architecture due to up-conversion block improves the deficiency of performance deterioration to be generated through harmonic signal and image signal conversion in the conventional RF front-end, and improves the deficiency of the complexity that is from to adopt a multiple local oscillators for the generation of wideband LO signal in the conventional RF front-end by applying the principle that tuning bandwidth is multiplied at sub-harmonic mixer. Manufactured circuits satisfy the deduced design specification and target standard with gain above 80 dB, noise figure below 6.0 dB and IIP3 performance above -5.0 dBm for the condition of the minimum gain in RF front-end.

  • PDF

The Study on the Effects of Breakwater Energy Conversion System by Horizontal Plate Installation (수평판 설치에 따른 방파제형 파력 발전 시스템의 영향에 대한 연구)

  • Jung, Sung-Young;Oh, Jin-Seok
    • Journal of Navigation and Port Research
    • /
    • v.38 no.1
    • /
    • pp.39-44
    • /
    • 2014
  • Due to the oil price is increasing continuously, active researches on sources of renewable energy has been invigorated. Above all, ocean energy has high-usability because of ocean current has high density and large quantity compared to the wind energy. In this paper, efficiency enhancement of the wave power generation was described through horizontal plate installation at the break water wave power generation system that converts the ocean energy into electricity. The power-conversion efficiency can be improved by horizontal plate installation at existing system, but there has been insufficient studies domestically. The purpose of this paper is to analyze about the effects of the horizontal plate installation on the breakwater wave power generation system by wave basin experiment and to propose a position of horizontal plate installation.

Design of a Linear CMOS OTA with Mobility Compensation and Common-Mode Control Schemes (이동도 보상 회로와 공통모드 전압 조절기법을 이용한 선형 CMOS OTA)

  • Kim, Doo-Hwan;Yang, Sung-Hyun;Kim, Ki-Sun;Cho, Kyoung-Rok
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.12 s.354
    • /
    • pp.81-88
    • /
    • 2006
  • This paper describes a new linear operational transconductance amplifier (OTA). To improve the linearity of the OTA, we employ a mobility compensation circuit that combines the transistor paths operating at the triode and subthreshold regions. The common-mode control schemes consist of a common-mode feedback (CMFB) and common-mode feedforward (CMFF). The circuit enhances linearity of the transconductance (Gm) under the wide input voltage swing range. The proposed OTA shows ${\pm}1%$ Gm variation and the total harmonic distortion (THD) of below -73dB under the input voltage swing range of ${\pm}1.1V$. The OTA is implemented using a $0.35{\mu}m$ n-well CMOS process under 3.3V supply.

A Proof of Concept Investigation on a Pendular Power Take-Off System of Horizontal Wave Power Generator (수평파력 발전장치의 진자형 1차 에너지 추출 시스템에 대한 기초 모형실험 및 시뮬레이션)

  • Park, Yong-Kun;Lim, Chae Gyoung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.9
    • /
    • pp.68-75
    • /
    • 2017
  • This paper presents the experimental and theoretical results of the dynamic responses of a pendular energy extractor in a two-dimensional wave channel. By adopting a wave maker with varying wave height and period, the dynamic responses of the pendular buoy were experimentally obtained. Furthermore, with the aid of the co-simulation of moving particle analysis and rigid dynamic analysis, the dynamic responses of the pendular system were evaluated. In order to validate the feasibility of the proposed wave power generator, the force tuning of the pendular system with restoring energy was carried out. The results provide proof of concept data for the development and design of a commercial model for horizontal wave power generators in the shoreline area.