• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.95-98
• /
• 1991

회전 기기의 이상으로 인하여 발생하는 진동은 축 회전속도의 고주파 성분 (super-harmonic)이나 또는 분수조파 성분(sub-harmonic)으로 나타나는 경 우가 대부분이기 때문에 회전기기의 진동을 주파수 영역에서 해석함에 있어 파워 스펙트럼의 주파수 축을 Hz로 나타내기보다는 축 회전속도의 order로 써 나타내는 것이 매우 유용하다. 스펙트럼을 order로써 나타내기 위해서는 샘플링 시간을 축 회전속도와 동기(synchronization)시켜야 하는데 이 방법으 로는 회전축에 엔코더(encorder)를 부착하여 엔코더에서 발생하는 펄스 신호 를 이용하여 샘플링하는 방법과 order tracking 필터를 이용하는 방법이 있 다. 그러나 전자의 방법은 원하는 회전축마다 엔코더를 부착하여야 하며 경 우에 따라서는 엔코더를 부착하기가 어려운 경우도 있으며, 회전기기의 운전 개시나 종료시처럼 회전속도가 급격히 변화하는 경우에는 낮은 주파수에서 중첩(aliasig)에 의한 오차가 수반될 수도 있다. 후자의 방법은 order tracking 필터 이외에도 여러 부수장비가 필요하며 기준 주파수(즉 회전속 도)가 급격히 변화하는 경우 PLL(phase locked loop)에서 tracking 오차가 발생된다. 최근에 발표된 논문에서 일정한 시간간격으로 샘플링한 데이터들 로부터 신호를 재합성하여 회전축의 속도와 동기가 되도록 재 샘플링함으로 서 스펙트럼의 주파수를 회전속도의 order로써 나타내는 방법을 제시하였다. 그러나 위 논문에서는 신호의 재합성에 필요한 재합성 필터(reconstruction filter)의 설계 방법에 대하여 구체적인 언급이 없이 다만 결과만을 논하였다. 따라서 본 논문에서는 재합성 필터의 설계 방법에 대하여 구체적인 방법을 제시하고 또한 동기화 샘플링의 장점 및 고려 사항에 대하여 고찰하였다. 고려한 능동 소음제어 에 대해 연구하였다. 경량화 추세에 따라 지반이나 케이싱이 경량이거나 유연하여 회전축과 동적으로 연성된 경우 회전축-베어링-지반으로 이루어진 2중구조의 회전축 계 동특성을 해석할 수 있는 프로그램을 개발하므로서 회전 기계류의 진동 전반에 걸친 문제점에 대한 그 원인과 현상을 명확히 분석하여 국내의 전기 계류의 보다 신뢰성있는 설계 및 제작자료를 확보하는데 기여할 수 있게 하 였다.존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다. 장비 내에서 반복 시행한 평균값의 차이는 대체적으로 유의한 차이가 없었으나, 다른 장비에서 반복 시행한 장비간의 사이에는 유의한 차이가 있는 경우가 더 많았다. 따라서 , MRS 검사를 소뇌나 뇌교의 어떤 절환에 적용하기 전에 각 장비 마다 정상 기준치를 반드시 얻은 후에 이상여부를 판 정하는 것이 필수적이라고 생각된다.EX> 이상이 적절한 진단기준으로 생각되었다. $0.4{\;}\textrm{cm}^3$ 이상의 좌우 부피차를 보이는 모든 증례에서 육안적으로도 해마위축이 뚜렷이 나타났다. 결론 : MR영상을 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The re

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제7권4호
• /
• pp.329-339
• /
• 1995

To clarify the surface drift velocity in gravity waves. experimental data measured in a two-dimensional wave flume were compared with theoretical values predicted by the Stokes 2nd- and 5th- order theories as well as by the conduction solution or Longuet-Hinggins (1953). Relative water depth and wave height ranged 0.040.13. For a closed flume condition, Stokes 2nd-order theory gives lower values than the experimental data, and the differences increase as both relative water depth and wave height increase. Based on the observed data of the surface drift velocities, a modified Parabolic model of the return current velocity Profile has been suggested, which is Proved to fit better to the existing experimental data of mass transport velocity profiles in a closed wave flume than the models of Longuet-Hinggins (1953) and Stokes wave theories do.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제37권5호
• /
• pp.461-467
• /
• 1992

A mungbean cultivar, 'Seonhwanogdu', was seeded on April 20, May 10, June 1, June 20, July 10 and July 30 in 1988, 1989 and 1990 to determine the optimum seeding date of mungbean in Cheju province. As seeding was delayed from April 20 to June 20, the number of days from emergence to first flowering (days to flowering) decreased from 56.7 to 36.7 days, on the three year average. Days to flowering of mungbean seeded on July 10 and 30 ranged 30 to 35 days except that of the plants seeded on July 10, 1988. Days to flowering linearly decreased as the average of daily mean air temperature from emergence to the first flowering increased. The number of days from the first flowering to the first maturity (days to maturity) in mungbean seeded on April 20 to July 10 ranged 14 to 21 days and was 29 to 40 days at the July 30 seeding. The number of pods per plant, the number of seeds per pod, 1000 seed weight and yield tended to increase with delaying seeding up to June 1 and June 20, and then to decrease with further delaying seeding. This study indicates that the optimum seeding time of mungbean in Cheju province is around mid-June.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제31권4호
• /
• pp.470-476
• /
• 1986

In order to find out the optimum seeding date of Job's tears, this study was investigated ecological characters, yield components and yield of Jang Seong native variety at 6 seeding dates (March 20, March 30, April 10, April 20, April 30 and May 10). Emergence period and heading period were shortened as the seeding date was late, and the number of leaves on the main stem was increased as the seeding date was early. Maturing period was 63-66 days when we seeded in March 20, March 30, April 10 and April 20, and it was delayed 68-77 days when we seeded on April 3$^{\circ}$ and May 10. Culm length was longest in April 10 seeding (it was 186.6 cm), and it grew short in the early and the late seeding, but there was no significant difference among seeding dates. Stem diameter was thickest in April 10, and April 20 seeding, that is, thickened to 10.1 mm, and it was thin in the early and the late seeding. Productive tiller number per hill was increased most in April 10 and April 20 seeding, that is, increased to 6.2, and it was decreased in the early and the late seeding. 100 grain weight was heaviest in April 10 seeding; it was 10.7 g, and it was light in the early and the late seeding. Ripeness rate was highest in April 10 seeding (87.4%), and it was lowest in May 10 seeding (76.3%). Grain yield was highest in April 10 seeding (602.8kg per l0a); therefore this period is regarded as optimum seeding date. C. protein, C. fat, C. fiber and C. starch showed significant difference among seeding dates, and C. protein showed possitive correlation (r =0.9811 **) and C. fiber Negative collelation (r =-0.8937*) with seeding dates.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제25권2호
• /
• pp.113-118
• /
• 2005

This experiment was conducted to compare the dry matter yields and fled values of winter forage crops using too cultivars of Barley, Rye md Italia ryegrass at the Dae-Ho reclaimed tideland, Korea from 2002 to 2004 2rowing season. Soil salt contents of three forage crops showed highest at sowing time, respectively and after wintering continuously lowed till harvest time. The dry matter yield was 6,668.8, 4,455.6 md 2,591.2 kg / ha, respectively, for Italian ryegrass, Barley and Rye. The highest Crude protein(CP) content was recorded in Italian ryegrass. Acid detergent fiber(ADF) contents were lowed in row with Barley, Italian ryegrass and Rye. Sodium contents in plant tissue were recorded high in line with Barley, Italian ryegrass and Rye. results mentions above suggest Italian ryegrass is suitable winter forage crops for cultivation on reclaimed tideland in view of the good emergence, forage production and its feed value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권2호
• /
• pp.71-76
• /
• 2017

The roll damping problem in the design of ships and offshore structures remains a challenge to many researchers due to the fluid viscosity and nonlinearity of the phenomenon itself. In this paper, the study on viscous roll damping of a circular cylinder was carried out using forced oscillations. The roll moment generated by forced oscillation using a torque sensor was measured for each forced oscillation period and compared with the empirical formula. Although the magnitude of the measured torque from the shear force was relatively small, the results were qualitatively similar to those obtained from the empirical formula, and showed good agreement with the quantitative results in some oscillation periods. In addition, the flow around the circular cylinder wall was observed closely through the PIV measurements. Owing to the fluid viscosity, a boundary layer was formed near the wall of the circular cylinder, and a minute wave was generated by periodical forced oscillations at the free surface through the PIV measurement. In this study, the suitability of the empirical formula for the roll moment caused by viscous roll damping was verified by model tests. The wave making phenomenon due to the fluid viscosity around the wall of a circular cylinder was testified by PIV measurements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제23권5호
• /
• pp.473-481
• /
• 2017

Seafarer sea survival training, such as basic safety refresher training and advanced safety refresher training, in accordance with the STCW Convention, is an indispensable program that can increase the crew survival rate during emergency situations at sea. It is important for crew members to carry out theoretical and practical training with various safety equipment in order to effectively train according to IMO model courses. Therefore, this study suggests the following measures to improve safety training facilities for seafarers by reviewing survival training requirements based on the IMO model course and comparing and analyzing related facilities based on operating cases from domestic and overseas training institutes. First, it is necessary to establish a training environment where seafarers can practice utilizing various, updated safety equipment such as marine evacuation equipment (slides, chutes, etc.). Second, it is necessary to construct an educational environment in which learners can directly or indirectly experience realistic emergency situations by installing marine environment simulation facilities with such equipment as a wave generator, rain fall device, wind generating device, etc. Third, it is also necessary to develop and expand customized training using virtual reality equipment in addition to experiential training, audiovisual training and simulation training.

• Journal of Navigation and Port Research
• /
• 제27권5호
• /
• pp.527-537
• /
• 2003

The characteristics of ship induced waves caused by navigation become widely different from both ship's speed and water depth condition. The ship induced waves specially generated in coastwise routes frequently give rise to call unforeseen danger for swimmers and small boats as well as shoreline erosion or sea wall destruction in coastal zones. The main concern of ship induced wave study until now is either how to reduce ship resistance or how to manoeuvre the ship safely under a constant water depth in the view point of shipbuilding engineers. Moreover, due to the trends for appearance of the high speed ships at the shallow coastal water, we are confronted with the danger of damages from those ship induced waves. Therefore, it is necessary to examine the development of ship induced waves and the influence of their deformation effects according to its propagation ray. In present study, in order to predict the development of the ship induced waves and their propagation under the conditions of complicate and variable shallow water depth with varying ship's speed, we constructed a computer model using Boussinesq equation with a fixed coordinate system and verified the model results by comparison with experimental results. Additionally, the model was applied under the variable water depth based on actual passage and we then confirmed the importance of the variable water depth consideration.

• Korean Journal of Weed Science
• /
• 제12권3호
• /
• pp.223-229
• /
• 1992

Very recently, the cultural pattern of paddy rice in Korea was transitted in a short period, and resulted as earlier in season and more in fertillizer application among others. Specially the weed emergence in paddy fields was drastically increased as affected by change of cultural pattern into early planting and into direct seeding methods. Of course, the direct-seeding in row seeding induced more weeds than in broad-cast direct -seeding. By maintaining the water level with saturation of the paddy surface induced more weeds, relatively more annual weeds than by deep in water level, respectively. Relatively more annuals in number of species and in emerged quantity comparing with perennials was caused by the shifting of cultural methods from transplanting to direct seeding. The severe weed competition damages were mainly resulted due to the shading by taller plant heights of weeds than crop during the whole growing seasons. Conclusively, accepting of direct seeding methods in paddy rice culture in Korea, the present bases for weed control methods ought to be naturally and effectively improved to meet the newly made weed problems.

• Korean Journal of Medicinal Crop Science
• /
• 제3권3호
• /
• pp.200-206
• /
• 1995

This experiment was carried out in the field to investigate the effects of sowing date and planting density under non - or P. E. - mulching cultivation on growth and yield of safflower. The optimum sowing date for safflower in the central and northern area of Korea was March 20th directly after thawing of frozen soil. P. E. - mulching cultivation was profitable with increasing the kernel yield 20% higher than in non­mulching cultivation. With respect to the the planting density, non - mulching $50[{\times}10cm$(20.000plants per10are) and P. E. - mulching $50{\times}15cm$(13,330 plants per 10 are) were optimum respectively.