• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.739-745
• /
• 2018

Recently, the incidence of heavy rainfall is increasing. Therefore, a rainfall analysis should be performed considering increasing frequency. The current rainfall analysis for hydrologic design use the hourly rainfall data of ASOS with a density of 36 km on the Korean Peninsula. Therefore, medium and small scale watershed included Thiessen network at the same rainfall point are analyzed with the same design rainfall and time distribution. This causes problem that the watershed characteristics can not be considered. In addition, there is a problem that the temporal-spatial change of the heavy rainfall occurring in the range of 10~20 km can not be considered. In this study, Author estimated design rainfall considering heavy rainfall using minutely rainfall data of AWS, which are relatively dense than ASOS. Also, author analyzed the time distribution and runoff of each case to estimate the huff's method suitable for the watershed. The research result will contribute to the estimation of the design hydrologic data considering the heavy rainfall and watershed characteristics.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.9-17
• /
• 1994

Optical properties of $TiO_2$ thin films prepared by ion-beam assisted deposition(1BAD) were investigated. The result shows that the refractive index of IBAD TiOL thin films measured by an envelope method is closer to that of the corresponding bulk than that of conventionally deposited $TiO_2$ thin films and the packing density of IBAD $TiO_2$ thin films measured by a vacuum-to-air spectral shift of films increases drastically. The vacuum-to-air spectral shift of an IBAD $(TiO_2/SiO_2)$ multilayer interference filter was negligible as compared to that of a conventional interference filter and so the IBAD filter is denser and more stable optically than the conventional filter. Also it is observed that the IBAD and conventional $TiO_2$ thin films are stoichiometric and amorphous.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.1-5
• /
• 1995

The texture profile of frankfurter sausages was carried out by comparing the domestic(A) and imported(B) products. Fourteen character notes were identified: elasticity, surface moisture, surface smoothness, center hardness, skin toughness, cohesiveness, denseness, chewiness, moisture release, cohesiveness of mass, lumpiness, graininess, skin separation, and oiliness. Reference scales and the $0{\sim}3$ point numerical scaling method were also established. Panelists evaluated sausage A harder than the sausage B. It had higher skin separation and elasticity scores requring more chewing. Sausage B had lower surface moisture and cohesiveness of mass, but higher moisture release and graininess. Panelists commented that the sausage B were oilier but had milder tastes.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.74-78
• /
• 2007

We report theoretical and experimental results for application of transmittance-controlled photomask technology to ArF lithography. The transmittance-controlled photomask technology is thought to be a promising technique fo critical dimension (CD) uniformity correction on a wafer by use of phase patterns on the backside of a photomask. We could theoretically reproduce experimental results for illumination intensity drop with respect to the variation of backside phase patterns by considering light propagation from the backside to the front side of a photomask at the ArF lithography wavelength. We applied the transmittance-controlled photomask technology to ArF lithography for a critical layer of DRAM (Dynamic Random Access Memory) having a 110-nm design rule and found that the in-field CD uniformity value was improved from 13.8 nm to 9.7 nm in $3{\sigma}$.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.517-526
• /
• 2008

Stereo vision is a fundamental method for measuring 3D structures by observing them from two cameras placed on different positions. In order to reconstruct 3D structures, it is necessary to create a disparity map from a pair of stereo images. To create a disparity map we compute the matching cost for each point correspondence and compute the disparity that minimizes the sum of the whole matching costs. In this paper, we propose a method to estimate a dense disparity map using region segmentation. We segment each scanline using region homogeneity properties. Using the segmented regions, we prohibit false matches in the stereo matching process. Disparities for pixels that failed in matching are filled by interpolating neighborhood disparities. We applied the proposed method to various stereo images of real environments. Experimental results showed that the proposed method is stable and potentially viable in practical applications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.87-93
• /
• 2005

In order to develope high concentration$\cdot$yield ozonizer, superposed discharge type ozonizer using overlap of silent discharge and internal electrode of mesh type has been designed and manufactured. It consists of three electrodes(central electrode, internal electrode and external electrode) and double gaps(gap between central electrode and internal electrode, gap between internal electrode and external electrode). Therefore, ozone is generated by overlapping silent discharges generated between the gaps respectively for which the AC high voltages applied to the internal electrode and the external electrode has a $180{[^\circ]}$ phase difference and for which the central electrode is a ground Ozone generation characteristics proportional to mesh of internal electrode by increasing of discharge electrode and controlling of discharge power density. As a result, the in maximum ozone concentration, generation, and yield can be obtained 17,720[ppm], 5.4[g/h], and 205[g/kwh] respectively.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.153-164
• /
• 2013

In this paper, lateral-torsional buckling(LTB) strength of HSB800 high strength steel plate girder with monosymmetric section under uniform moment was evaluated by nonlinear analysis. The unbraced length in inelastic LTB range was considered for the sections whose smaller or larger flange is in compression with slender, noncompact and compact web. Analyses of SM490 steel girders were first performed with the single-panel and three-panel model to judge the validity of the constructed models by comparing those results with Eurocode 3, AASHTO and AISC codes. By using the same models, LTB strength of HSB800 girder was evaluated and it was found that the sections whose smaller flange is in compression with noncompact flange-slender/noncompact web could not reach the flexural strength of the design codes.

• Education of Primary School Mathematics
• /
• v.21 no.4
• /
• pp.375-395
• /
• 2018

This study examines the influence of the bodily interaction with digital technology on meaning-making process in a mathematical activity. Increasing interest in the use of multi-touch dynamic digital technology has brought the movement of the body to the center of research focus in recent mathematics education literature. Thereby, we investigate the process in which the meaning of the density of rational numbers emerges around the bodily interaction on the multi-touch dynamic digital technology. We analyze a case of a small group of primary school students with microethnography. In the result, the students formed the higher level of meaning of the density, where the finger movement of zooming in-and-out played a crucial role throughout the meaning-maknig process.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.713-722
• /
• 1995

Background: Chest X-ray of coal workers' pneumoconiosis and shipyard welders' lung show similar and regular opacities mostly, it is very difficult that we distinguish the former from the latter by only chest X-ray. so we performed this study to understand the progression of the disease and to provide the disease by considering pulmonary function and other factors in proportion to the profusion of small regular opacities of chest X-ray in both groups. Method: 430 coal workers' pneumoconiosis were compared with 311 shipyard welders' lung by the number, the age, the duration of dust exposure, %vital capacity(%VC), %FEV1.0, the type of ventilatory impairment, the combined pulmonary disease according to the profusion of small regular opacities on the chest radiographs, which were classified into category 0/1, category 1, and category 2. Result: 1) the percent of category 2 in coal workers' pneumoconiosis was 54.4%. the percent of category 1, and category 2 in welders' lung were 60.0%, 7.4%. the progression to the category 2 was higher in coal workers' pneumoconiosis than in welders' lung 2) The mean age was higher in coal workers' pneumoconiosis than in welders' lung, significantly increased in proportion to the progresion of profusion of small regular opacities in both groups 3) There was no difference in the duration of dust exposure by category 1/0, but the duration of dust exposure by category 1, 2 in coal workers' pneumoconiosis more significantly increased than in welders' lung. the duration in the proportion of category 2 to category 0/1, 1 significantly increased in the proportion to small regular opacities in coal workers' pneumoconiosis. but there was no significant difference in the proportion to small regular opacities in duration of dust exposure in welders' lung. 4) There was no significant difference of mean values of %VC(%vital capacity)in both groups except for category 1. the mean values of %VC had no relationship between the progression of small regular opacities in both groups. 5) The mean values of %FEV1.0 decreased more significantly in coal workers' pneumoconiosis than in welders' lung except for category 0/1. and decreased significantly in proportion to the profusion of small regular opacities in coal workers' pneumoconiosis. there was significant difference of %FEV1.0 in the proportion of category 2 to category 011 in welders' lung. 6) there were no significant difference of %FEV1.0, %VC in smoker and nonsmoker in both groups. 7) With regard to the type of ventilation in both groups in coal workers' pneumoconiosis 21.4 percent of patients belonged to the restrictive type, 11.6 percent to the obstructive type, 5.6 percent to the combined type, but in welders' lung 21.8 percent to the restrictive type, 2.9 percent to the obstructive type, 1.9 percent to the combined type. 8. in the pulmonary disease, the incidence of the pulmonary tuberculosis was the most in both groups, was more in coal workers' pneumoconiosis than welders' lung Conclusion: If we compare coal workers' pneumoconiosis with electric arc welders'lung by considering pulmonary function and other factors in proportion to the profusion of chest X-ray, I think that we will have the better result in understanding the progression of the disease and provision of the disease in both groups.

• Korean Journal of Cognitive Science
• /
• v.11 no.2
• /
• pp.37-51
• /
• 2000

The present study compared computer users target-selection response patterns when the targets were varied in terms of their relative location and distance from the current position of the cursor. In Experiment 1, where the mouse was used as an input device, the effects of different directions and distances of simple target(small rectangle) on target-selection response were investigated. The results of Experiment 1 can be summarized as follows: (1) Overshooting was more frequent than either undershooting or correct movement and (2) this tendency was more prominent when the targets were presented in the oblique direction or in farther location from the current cursor position. (3) Although the overshooting and undershooting were more frequent in the oblique direction, the degree of deviation was larger in horizontal and vertical direction. (4) Time spent in moving the mouse rather than that spent in planning, calibrating or clicking was found to be the most critical factor in determining total response time. In Experiment 2, effects of the font size and line-height of the target on target-selection response were compared with regard to two types of input devices(keyboard vs. mouse). The results are as follows: (1) Mouse generally yielded shorter target-selection time than keyboard. but this tendency was reversed when the targets were presented in horizontal and vertical directions. (2) In general, target-selection time was the longest in the condition of font size of 10 and line-height of 100%, and the shortest in the condition of font size of 12 and line-height of 150%. (3) When keyboard was used as the input device, target-selection time was shortest in the 150% line-height condition, whereas in the mouse condition, target-selection time tended to be increased as the line-height increased. which resulted in the significant interaction effect between input device and line-height. Finally, several issues relating to human-computer interaction were discussed based on the results of the present study.