• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.513-522
• /
• 2008

Service-Oriented Architecture(SOA) is an method to develop applications by developing and publishing reusable services which potentially be used in various applications, and discovering and composing right services dynamically. SOA adopts a paradigm of publish-discover-invoke, which is considerably different from object-oriented and component-based development(CBD) approaches. The service in SOA is different from function in procedural programming, object in object-oriented programming, and component in CBD, and its fundamental requirement is a high level of reusability and applicability. In SOA, service providers and service consumers are loosely coupled since the providers try to develop reusable services and the consumers try to locate right services without knowing much about the providers and their published services. Moreover, the process of searching, choosing and invoking right services is not presented in conventional programming paradigms. Therefore, conventional approaches to developing user interfaces and invoking the functionality on servers through JSP, and RMI in object-oriented programming cannot well be applicable to designing clients’ programs in SOA. Therefore, there is a high demand for a practical and systematic process for developing clients’ applications, and the such a process should be devised by considering key characteristics of services and SOA. However, little work on this area is known to date, and there has not a process for client side just except few guide lines for developing service client. In this paper, we propose a practical and systematic development process for developing clients' applications in SOA. Then, we define instructions for carrying out each activity in the process. To show the applicability of the proposed work, we show the result of applying our process in developing a services application for searching and booking hotels.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.259-270
• /
• 2002

A small granodiorite-quartz monzonitic stock containing sericitic and propylitic alteration assemblages hosts a Cu-W breccia-pipe deposit in the southeastern Cyeongsang basin. The mineralized breccia-pipe contains angular to subangular brecciated fragments of granitic rocks showing clast-supported textures. An assemblage of quartz, tourmalines, sulfide minerals (mainly chalcopyrite, arsenopyrite and pyrrhotite) and calcite was precipitated as a hydrothermal cement between the brecciated fragments. A tourmaline aureole surrounds the breccia pipe. Extensive tourmalinization of the granitic rocks near and within the pipe and no tourmalinization in the sedimentary and volcanic rocks. The tourmalines are marked by Fe-rich, black charcoal-like schorl (80 mol% schorl relative) nearer the schorl-dravite solid solution. The chemical changes in the hydrothermal fluid are reflected by variations in compositional Boning from cores to rims. They generally contain cores with low values of Fe/(Fe+Mg) and high values of Na/(Na+ca) relative to rims. This is because of an increase Fe and Ca contents toward rims. The main trend of these variations is a combination of the exchange vectors Ca(Fe, Mg) $(NaAl)_{- }$ $_1$ and $Fe^{3}^{+}$ $Al_{[-10]}$ $_1$ It is thought that boiling causes the loss of $H_2$ into the vapor phase resulting in the oxidation of Fe in the aqueous phase. pH of the melt would be one of important controlling factors for the tourmaline stability. The tourmalines could be precipitated when the system evolved to the acidic hydrothermal regime as most hydrothermal brines and acidic gases exsolved from the magma. The Ilgwang tourmaline crystallization is products of hypogene orthomagmatic hydrothermal processes that were strongly pipe-controlled.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.263-275
• /
• 2012

Jurassic Daebo biotite granites, known as one of the main stone resources in the country, are widely and away distributed in the Pocheon and Yangju areas of the mid Gyeonggi massif. The objects of the study are mainly to reveal the unique characteristics of grain size, rock color, mineral composition, physical property and fracture system from the above biotite granites. Biotite granites from the Pocheon area (PG) and Yangju area (YG) are represented by coarse-grained and light gray, and medium to coarse-grained and grayish to light gray, respectively. In modes, main minerals of Qz+Af+Pl (quartz+alkali feldspar+plagioclase) are more increased in the PG, and accessories of biotite are more increased in the YG, which differences can cause the PG more bright light gray than the YG. Specific gravity (SG) shows somewhat more increasing in the YG than the PG. These differences can be caused by more increasing in biotite contents of higher specific gravity compared to the major minerals in the former than the latter. Absorption ratio (AR) and porosity (PR) of the PG and YG show the same values of 0.33 % and 0.86 %, respectively. In the correlations, PR vs SG and AR vs PR show gradually negative and distinctly positive trends, respectively. Compressive strength (CS) and tensile strength (TS) show increasing in the PG (CS: 1,775 $kg/cm^2$, TS: 87 $kg/cm^2$) than the YG (CS: 1,647 $kg/cm^2$, TS: 79 $kg/cm^2$). These strength characteristics could be attributed to the inherent rock textures of them. Abrasive hardness (AH) also shows a little increasing in PG, which can be caused by increase in quartz contents having higher hardness than the other major minerals. Orientations of fracture sets from the PG and YG were compared with those of vertical rift and grain planes in Mesozoic granites of the country. From the overlapped diagram, the distribution pattern between fracture sets and above vertical planes suggests that microcrack systems developed in Mesozoic granites in Korea occur also in the Daebo biotite granite bodies of the mid Gyeonggi massif. From the relation diagram showing the characteristics of fracture patterns for the above two area, PG and YG may have more potentiality for dimension and non-dimension stone resources, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.43-51
• /
• 2015

At present, in the case of small and medium window manufacturers in South Korea, glazing and window frame manufacturers are divided into separate businesses. However, in the fenestration energy consumption efficiency rating system and the energy-saving design criteria for buildings, the coefficient of overall heat transmission standard for windows is defined by window sets, which integrate glazing and window frames. At most construction sites, windows are constructed by installing separately supplied glass and frames. Research that can integrate the reality and the system is therefore necessary. The present study first investigated and analyzed the on-site situation of the fenestration energy consumption efficiency rating system. According to the results, while overall understanding of the fenestration energy consumption efficiency rating system was high, satisfaction with it was low, and the general practice at construction sites was to use windows assembled on site rather than integrated window systems manufactured at factories, thus making it difficult to confirm that the current rating system was well applied on site. Consequently, the reality of industrial sites must be reviewed and a realistic alternative to the fenestration energy consumption efficiency rating system must be presented instead of focusing on theory.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.93-99
• /
• 1985

All soil characteristics for 10,077ha of establishable grassland in 1984 were statistically summarized. Soils could be classified into 5 of Order, 7 Suborder, 11 Great group, 28 Subgroup, and 105 Series by the new comprehensive classification system. Distribution rate of farm houses managed the extent magnitude of 3.0ha was 70.8% and its total extent was 35.9%. Extent rate of uncultivated method was 71.3%. These soils were distributed with regard to hilly land and mountain foot slope at, 82.0, and to 0-30% slope at 66.9%. Soil texture was light such as sandy loam to loam at 85.0%, available soil depth more than 20cm at 97.8%, and gravel content less than 35% at 98.4%. Soil would be distributed in 67.3 of first class, 29.7 second class, and 3.0% third class for suitability. Mean values of pH, available $P_2O_5$, OM, Ca, Mg and K for topsoil were 5.6, 31ppm, 3.2%, 2.23me/100gr, 1.05me/100gr, and 0.37me/100gr, respectively.

• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.13-25
• /
• 1986

철강 구조물의 용접기술에 있어 용접부의 신속성을 좌우하는 가장 중요한 요소는 용접균열에 관한 문제와 용접본드부의 취화에 관한 문제로 요약될 수 있다. 일반적으로 용접부 및 그 근방의 금속은 국부적으로 매우 높은 온도까지 급열된 후 급냉되므로, 용접부에서 각종균열의 발성 위험성이 높아지고 용접본드부를 취화하여 파양인성의 저하를 초래하게 된다. 따라서 이러한 문 제점을 극복하기 위해서는 재료의 선택이나 설계, 시공, 검사의 각 단계에서 충분한 검토가 필 요하다. 특히 최근 들어 이전보다 높은 강도의 고장력강재가 널리 사용되고 구조물의 대형화에 따라 구속조건이 증대되며 구조물의 사용 조건은 더욱 가혹 화함에 따라 상술한 문제점은 더욱 중요시되고 있다. 철강 용접부에 발생하는 균열은 용접시공시 발생되는 균열과 용접완료후 구 조물 사용중에 발생되는 균열로 대별될 수 있다. 용접시공중 발생되는 균열은 용접열싸이클로 인해 생성되는 조직, 석출물등의 치금학적 요인과 잔유응력 또는 구속응력등의 역학적 요인이 중첩됨으로서 발생된다. 또한 사용중 발생되는 균열은 상기의 두 가지 요인이외에 환경적 요인이 첨가되어 발생된다고 볼 수 있다. 이상과 같은 용접균열을 방지하기 위해서는 실 구조물 용접 조립시의 각종 조건을 재현한 시험법을 통해 용접균열 발생의 한계조건을 정량적으로 분석할 필요가 있다. 이러한 균열 시험의 결과, 적정한 용접 시공 조건이 도출될 수 있기 때문이다. 이와 같은 필요성에 의해 지금까지 다수의 용접균열 시험법에 관한 연구가 행하여져 왔고 그 중에는 각 국가의 협회나 학회의 규격으로 확립된 것도 많으며 국제규격으로 되어 있는 것도 있다. 본 고에서는 각종균열들에 대한 지금까지 밝혀진 기구들에 대해 해설하고, 그 각각에 적용되고 있는 시험법들에 대해 소개하고저 한다.C1지구의 공업.생활용수는 103units, 33units로 배분되고, 하류지구에 304units로 배분되었다. 따라서 용도별로 물배분하므로서 금호강 하루지역에 더욱 많은 물을 배분할 수 있음을 알았다.통해서 수위-유량관계(rating curve)를 규명하였다. 시험지구의 관개효율 및 용수손실 규명 등에 관한 기본자료를 수집하기 위해서는 계측시스템의 운영은 장기간으로 지속 되어야 한다며, 전기전도도와 토양수 농도, 전기전도도와 함수량의 관계를 이용한 천이상태의 오염원 농도 측정방법을 개발하였다. 특히 제안식에서는 한계함수량의 개념을 도입하여 전기전도도와 함수량관계를 추정하므로 추정식의 실험값 반영 정도를 증가시켰다. 본 연구에서 제안된 식을 이용하여 추정된 전기전도도와 함수량관계는 다른 제안식에 비하여 개선된 결과를 보여 주었고, 본 연구에서 개발한 오염원 농도 측정법을 이용하여 측정한 결과 함수량이 0.15이하에서는 측정오차가 크지만 함수량이 0.15이상일 경우 매우 좋은 결과를 보였는데 질량평형을 검토한 결과 약 5-10%의 오차율을 보였다. 따라서 본 논문에서 개발된 천이상태의 오염원 농도측정법은 용존 오염물질의 이송에 관한 정확한 실험을 제공할 것으로 판단된다.며, 수질 보전적-환경 보전 차원에서 저수관리 체계를 확고히 할 수 있는 방안을 강구하여야 할 것이다.펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.지역과 비도시지역을 비교하는 조사 연구가 필요하며, 이러한 조사결과를 바탕으로 자녀의 식습관에 대한 교육을 위한 교재, 교구의 개발과 영양, 식습관 교육프로그램의 개발을 통해 가정과 학교에서 부모와 교사가 자녀의 식생활 지도 관리를 돕고 가정과 교육기관이 연계한 교육 프로그램이 활성화 될 수 있도록 지속적인 관심을 기울여 나가야 할 것이며, 이에 따른

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.514-516
• /
• 2004

위성의 개발을 위해서는 오랜 개발기간과 많은 예산, 축적된 기술이 요구된다. 또한 위성에는 다양한 분야의 기술이 사용되어지기 때문에 각 서브시스템마다 독자적인 개발환경을 구축할 필요가 있다. 특히 위성의 찌어. 임무수행 및 지상과의 통신 등을 담당하는 탑재소프트웨어는 위성의 용도 및 목적에 따라 개발환경이 크게 달라진다. 실시간 운영체제는 무엇을 사용하는지, 개발 및 검증을 위한 도구로 어떤 프로그램을 사용하는지, 내외부의 인터페이스는 어떠한 방식으로 수행할지, 새로운 기능의 CPU나 하드웨어에 대한 제어 등 위성의 탑재소프트웨어를 개발하기 위해서는 많은 검토 항목들이 고려되어야 한다. 새로운 위성을 개발할 경우 신기술의 적용과 새로운 시스템위성시스템의 검증 및 개발을 위한 개발검증장비가 요if되며, 위성시스템의 변경 때마다 개발검증장비를 새로이 구축하게 되면 많은 기간과 막대한 비용이 위성개발 시마다 소요된다. 위성선진국에서는 다양한 위성의 개발 시 비용절감 및 개발기간 단축을 위하여 범용위성용 개발검증장비를 개발하여 이용하고 있는 추세이다. 국내에서는 다목적실용위성 1호가 발사되어 성공적으로 임무를 수행하고 있으며 다목 실용위성 2호가 개발되어 현재 통합 및 조립시험이 진행 중이다. 그러나 새로운 위성시스템의 사전 검증 및 신기술의 적용을 위한 범용위성 시스템 테스트베드에 대한 기술은 미비한 실정이다. 이러한 범용위성용 개발검증장비의 기반기술을 확보하기 위하며 현재 위성전자전산시스템 개발검증장비에 대한 연구가 수행되고 있다. 본 논문에서는 현재 수행되고 있는 PowerPC를 이용한 위성 탑재소프트웨어 개발검증시스템의 설계 및 개발현황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.629-641
• /
• 2006

The Standing Buddha Statue in the Gwanchoksa temple consists of medium to coarse grained biotite granodiorite with dark grey color, and it has a week gneissosity along the pegmatite veins. The results of magnetic susceptibility and geochemical patterns of the host rock of Standing Buddha Statue and the basement rock suggest that both values are formed from the co-genetic magma with the same differentiation process. The CIAs of the basement rock and the Standing Buddha Statue are calculated to 51.43 and 50.86, and the WPIs are estimated 4.52 and 8.95, respectively. So the weathering potential from the host rock of Standing Buddha Statue and basement rock prove to be high. The Standing Buddha Statue is terribly damaged with physical weathering from deterioration and exfoliation, and are scattered with secondary pollutant and precipitate. Basement rock is also in danger of ground collapse because of irregularly developed discontinuity system. Most surface of Standing Buddha Statue is seriously discolored into yellowish brown and dark gray, or black precipitates are also formed. Moreover, it is heavily covered with crustose lichen, fungi and algae, or moss are also found. In order to control the influential factors with the complex deterioration of Standing Buddha Statue, it is needed to rearrange a site environments, and conservation scientific management is required to protect it from covering lichens, exfoliations and fractures.

• Journal of the Korean association of regional geographers
• /
• v.9 no.4
• /
• pp.461-480
• /
• 2003

This paper is to consider the new urbanization process of Daegu in the 1990s, especially with its economy, politics, social culture, environment and space. In the economic aspect, the industrial structure of Daegu has shifted from the manufacturing- centered economy to the service economy. But it has not yet overcome the linear frame of industrial structure still relying on the textile industry, though the degree of industrial specialization has increased in the part of the fabricated metal products and the precision and optical instrument. In the political situation that the implementation of the local self-government has made the relation between localities more competitive, the local government of Daegu has led a boom for boosting the regional economic growth, organizing private-public-research relations to improve the weakening regional investment and production function. In the social and cultural aspect of the new urbanization, the investment into the soft-ware facilities has been increased, and the urban festivals have been changed so as to revitalize the regional economy. In the environmental aspect, as the self-government system has launched, conflicts around values and interests of local governments have revealed frequently due to locations of infra-structures and of abhorrence facilities. Finally, seen from the spatial dimension of the city, the extension of residential areas and unregulated use of urban space have a result of inefficience of land-use, and this kind of unplanned outer expansion of the city has brought about with further separation of house and working place, and increasing distance of movements and the an urban spatial structure which requires more energy consumption.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.664-679
• /
• 2008

This paper attempts to evaluate the local economy and the local economic development policy in Goryeong County and to propose some policy alternatives for local economic development. Goryeong County has a locational advantage, which is not just geographically proximate to Daegu, a large metropolis, but also connected directly to the national highway networks. This region can also be regarded as a rural area, in a sense that the primary industry still plays a more important role for the local economy than the secondary industry and the tertiary industry. However, it is problematic that the local economic development strategies of Goryeong are universal rather than strategic and systematic. In order to design an effective regional economic development policy, the policy makers are necessary to deliberately consider regional specificity and geo-political and geo-economic situations around the region. In addition, it is important to say that policy makers, particularly in rural regions, need to break from the fantasy of high-tech industries. In this context, I propose some region-specific and context-specific policy ideas, including the promotion of the agro-food cluster and the build-up of the em-industrial complexes specialized in mechatronics and transportation equipment manufacturing.