• Restorative Dentistry and Endodontics
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2001

통상적인 근관형성 과정에서 근관형태의 직선화 경향을 발견할 수 있으며, 그 결과 만곡이 심한 근관에서 이상적인 근관형태를 얻기가 어렵다. 이를 극복하기 위한 많은 기구들과 근관 성형법들이 개선되고 소개되었다. 본 연구에서는 최근에 개발된 직사각형의 단면을 가지는 stainless steel file인 RT file과 Flex-R file, K-file을 이용하여 만곡근관 형성 후 최종 근관형태를 비교하여 각 file을 평가하고자 한다. 본 실험은 Bramante등의 방법을 변형하여 술 전의 근관형태와 술 후의 근관형태를 비교하였다. Schneider의 방법을 변형하여 3차원적 만곡을 계산하여 12도에서 36도 이내에 만곡도를 가진 근관을 선택하였다. 49개의 발거된 상악대구치 협측근관이나 하악대구치 근심근관을 3개의 군으로 나누고 레진과 플라스틱으로 제작된 mold에 투명한 교정용 레진으로 매몰하였다. 근첨에서 2.5, 5, 8mm지점에서 절단하여 각 mold에서 재조립한 후 다음과 같이 근관형성을 시행하였다. 제 1군은 SS K-file을 이용하여 step-back 방법 ; 제 2군은 Flex-R file을 이용하여 balanced force 방법 ; 제 3군은 RT file을 이용하여 step-back 방법으로 근관 형성하였다. 술 전과 술 후에 각 시편들을 체현미경으로 사진촬영하여 근관 중심 위치 이동률, 근관형성으로 삭제된 상아질양, 근관형성 후 모양을 Sigma scan/ image software program으로 계산하고 One way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결론을 얻었다. 1. RT file이 치근단에서 K-file보다 유의성 있게 근관의 중심을 유지하는 것으로 보였다. 치아 중앙부에서는 RT file과 Flex-R file이 K-file에 대해 유의성 있게 우수한 것으로 나타났다. 2. 근관형성 후 삭제된 상아질양에서는 치근단에서 RT file이 적게 나왔으나 유의성은 없었다. 3. 근관형성 후 절단면 모양은 원형, 타원형, 불규칙한 형태들이 다양하게 나타났고 각 군간에 유의성 있는 차이는 없었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.330-342
• /
• 1998

Benthic environmental parameters were analysed at 40 stations during the period from April 1995 to February 1996. such as water temperature, salinity, and dissolved oxygen (DO)-concentration in the surface and bottom water layers, grain size, chemical oxygen demand (COD), ignition loss, particulate organic carbon (POC) in the sediment of Youngsan River estuary. The water temperature ranged from 4.1 to $29.8^{\circ}C$ in the surface and 4.0 to $20.7^{\circ}C$ in the bottom layers. Salinity ranged from 15.1 to $33.6\%_{\circ}$ in the surface and 31.5 to $33.2\%_{\circ}$ in the bottom layer. The salinity in the outer pan of the study area was higher than that of inner area from autumn to spring, whereas they remained lower in summer. Dissolved oxygen concentration ranged from 5,1 to 11.2 $mg/\ell$ in the surface, and 0.79 to 10,2 $mg/{\ell}$ in the bottom layers. Hypoxic condition ($\le2.0mg/\ell$) was developed in the bottom water layer from Youngsan dike to Mokpo Harhour in summer due to the summer stratification. The surface sediment type was silty clay with a mean grain size of $9.12{\pm}0.45\phi$. The range of COD was from 6.15 to $15.49mgO_2/g$ with a mean of $10.59{\pm}12.64mgO_2/g$. The COD in the inner stations was relatively higher than that of outer stations, and decreased toward the outer part of the study area. Ignition loss (IL) ranged from 3.35 to $15.45\%$ with a mean of $5.96{\pm}1.91\%$. Principal component analysis was carried out from the following five environmental parameters: water temperature, dissolved oxygen in the bottom layer and mean grain size, clay content and COD in the sediment. The forty stations in the study area were classified into three stational groups. Group I was located in the inner part of the estuary characterised by relatively low surface salinity and bottom water temperature, fine sedimemt texture, high organic matter and low dissolved oxygen concentration during the summer. Meanwhile, Group III showing relatively high bottom salinity and water temperature was located in the outer part of the estuary characterising coarse sediment and low organic content in sediment. Group II was between Group I and Group III. The division of the areal groups had high correlations to the DO in the bottom layer and clay content in the sediment.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.664-679
• /
• 2008

This paper attempts to evaluate the local economy and the local economic development policy in Goryeong County and to propose some policy alternatives for local economic development. Goryeong County has a locational advantage, which is not just geographically proximate to Daegu, a large metropolis, but also connected directly to the national highway networks. This region can also be regarded as a rural area, in a sense that the primary industry still plays a more important role for the local economy than the secondary industry and the tertiary industry. However, it is problematic that the local economic development strategies of Goryeong are universal rather than strategic and systematic. In order to design an effective regional economic development policy, the policy makers are necessary to deliberately consider regional specificity and geo-political and geo-economic situations around the region. In addition, it is important to say that policy makers, particularly in rural regions, need to break from the fantasy of high-tech industries. In this context, I propose some region-specific and context-specific policy ideas, including the promotion of the agro-food cluster and the build-up of the em-industrial complexes specialized in mechatronics and transportation equipment manufacturing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.34-42
• /
• 1972

Current noise is an important indication of quality in deposited carbon film resistors. Imperfections in the resistive film create high current densities and consequently high current noise. The magnitude of current noise is depend upon many inherent properties of the resistor such as resistive material and others such as processing, fabrication and packing of resistive elements, etc. Performance tests have definitely established a correlation between current noise and electrical performance of carbon film resistors. To interprete the normal distribution of the current noise index for representative groups of resistors would serve as a powerful tool in judging the Quality control and product uniformity by the manufacturer.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.63-65
• /
• 2012

최근 군사 모의 소프트웨어는 사용자의 다양한 요구 변화에 빠르게 적응하기 위해 컴포넌트를 조합하여 구성하는 방법으로 개발되고 있다. 이와 같은 소프트웨어에서 부대의 과업을 달성하기 위해 사용자의 관여 없이 부대구성원(부대원 또는 예하부대)의 전술적 행위(협업)를 모의하는 기술은 대규모의 군사 모의를 가능하게 하는 중요한 기술 중 하나이다. 부대 구성원의 협업을 모델링하고 구현하는 기술은 사용자(모의 부대장)로 하여금 부대구성원의 세부적인 제어를 요구하지 않고 자신이 제어하는 부대에 할당된 임무 달성에 집중시키는 등의 이점을 제공한다. 본 연구를 통해 우리는 군 도메인에서 사용하고 있는 OneSAF와 FLAMES, VR-Forces 등의 컴포넌트 기반의 모의 소프트웨어를 분석하고, 이들 소프트웨어에서 협업 모델의 위치를 설명한다. 다음으로 역할 개념을 기반으로 부대구성원들의 협업 모델을 제안한다. 본 연구에서는 프로토타입의 개발을 통해 제안 모델의 적용 가능성을 검증한다.

• Korean Journal of Environmental Biology
• /
• v.34 no.4
• /
• pp.329-345
• /
• 2016

In order to study the community structure and distribution pattern of macrobenthos in the subtidal area of Shia Sea between Haenam peninsula and Shinan-Jindo area at southwest coast of Korea, duplicate sediment samples were taken seasonally by van Veen grab (surface area, $0.1m^2$) from 49 stations between November 2001 and August 2002. The surface sediment facies were muddy sandy gravel near Mokpo-Gu channel, gravel in the Myoungrang channel with high tidal currents, and sandy muddy in the southern Uido area. Ignition loss in the sediment ranged from 0.5 to 1.5% with a mean of 0.6%. A total of 271 taxa were collected with a mean density of $166ind.\;m^{-2}$ and a mean biomass of $29.2g\;m^{-2}$. Polychaetes were dominant faunal group in terms of species richness and abundance, accounting for 34% and 40% of total species number and abundance, respectively. Molluscs accounted for 44% of biomass. Bio-Env analysis revealed that sediment composition and ignition loss affected the spatial distribution of subtidal macrobenthic community in the study area. Major dominant species were Photis longicaudata, Septifer keenae, Maldane cristata, Lumbrineris longifolia, Heteromastus filiformis and Coptothyris grayi. Based on cluster analysis, four station groups were classified. They were associated with sediment types. Bivalve, Striarca symmetrica, polychaetes, Glycera chirori, Heteromastus filiformis and decapod Latreutes planirostris were major contributing fauna in station group A, B, C, and D, respectively. These results suggest that macrobenthic community of the Shia Sea is normally influenced by sediment type and related ignition loss.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.133-143
• /
• 2011

In Mujoo area, the granitic pegmatites are developed in the granitic gneiss complex with Jurassic gneissic granites, where Nb-Ta mineralization were reported. Pegmatites are mainly composed of large crystals of quartz, feldspars of end-member orthoclase and albite, and muscovite. Nb-Ta minerals in study area are columbite (Nb > Ta) in composition. Chemistry of muscovites shows post-magmatic in origin and they are closely related with columbite. Large columbite, in pegmatites occurred with quartz and feldspars, while microcrystalline columbite is associated with muscovite. The Nb contents in large columbite are relatively higher than those in microcrystalline ones. Two pegmatites, 4~15 m in width and 120 m, 250 m in extension respective1y, are developed. Five drilling cores with total 600 m in length are finally obtained and revealed no possible potential for economic rare metals of Na-Ta deposits.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2016

We studied the heavy minerals in 46 surface sediments collected from the Central Yellow Sea Mud (CYSM) to characterize the type, abundance, mineralogical properties and distribution pattern using the stereo-microscopy, field-Emission scanning electron microscopy (FE SEM) and chemical analysis through the energy dispersive spectrometer (EDS). Heavy mineral assemblages are primarily composed of epidote group, amphibole group, garnet group, zircon, rutile and sphene in descending order. Epidote group and amphibole group minerals account for more than 50% of total heavy minerals. The minerals in epidote group, amphibole group and garnet group in studied area are epidote, edenite and almandine, respectively. When we divided the CYSM into two regions by $124^{\circ}E$, the eastern region contain higher contents of epidote and (zircon + rutile), which are more resistant to weathering but lower of amphibole, which is less resistant to weathering than the western region. Based on this results, it is possible to estimate that the eastern region sediments are transported for a long distance while western region sediments are transported for a short distance from the source area. In the future, the additional study on the heavy minerals in river sediments flowing into the Yellow Sea and much more samples for marine sediments must be carried out to interpret exactly the provenance and sedimentation process.

• Journal of Life Science
• /
• v.26 no.7
• /
• pp.868-874
• /
• 2016

Receptor-interacting protein kinase 1 (RIPK1) and RIPK3 are members of the serine or threonine protein kinase superfamily that phosphorylates the hydroxyl group of serine or threonine through the highly conserved kinase region. The RIPK family plays a crucial role not only in inflammation and innate immunity, but also in mediating programmed cell death, such as apoptosis and necroptosis. The interaction between RIPK1 and other TNFR1-related proteins has been shown to assemble a signaling complex I that controls activation of the pro-survival transcription factor NF-κB upon binding of cytokines to TNF receptor 1 (TNFR1). Moreover, RIPK1 and RIPK3 interact through their RIP homotypic interaction motifs (RHIMs) to mediate programmed necrosis, which has long been considered an accidental and uncontrolled cell death form with morphological characteristics differing from those of apoptosis. Highly conserved sequences of RHIM in RIPK1 and RIPK3 were shown to regulate their binary interaction, leading to assembly of a cytosolic amyloid complex termed the “necrosome”. The necrosome also contains mixed lineage kinase domain-like protein (MLKL), which has been found recently to be a substrate of RIPK3 to mediate downstream signaling. This review provides an overview of the functional and physiological characteristics of RIPKs and MLKL in TNF signaling.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.59-72
• /
• 2008

Computing systems in the modern era are expanding rapidly to include mobile-based businesses that make us of the various convergence distributed business process. This has lead to growing interest in the field of mobile embedded software development methodology, which has in turn lead to the proliferation of the embedded mobility. The use of CBD (Component Based Development) provides reusability, maintainability and portability, all of which are very important and focus issues to the business process. It also comes with the inherent productivity, quality and reliability of CBD. To make efficient use of CBD, though, clarified interface definitions for component integration are necessary. These definitions should be made up of collaborative hierarchical and horizontal architecture layers. Successful definitions should apply an effective framework made up of the architecture and process. In this paper, we describe an interface specification for small grained mobile embedded components(MEC) for the mobile embedded domain to meet maximum user requirements. We build and deploy the reconfigurable design patterns and components (in business domain categories) to make a component hierarchy and business logics for mobile embedded software. Proposed components specification plays a major role in development of the software for handling inconsistency in existing specification. It also includes plenty of specification information, using semantics and modeling based mechanisms to support business processes. We propose a development model of mobile embedded software using CBD for very complex and dynamic mobile business. We can apply it in a plug and play manner to develop the software. We verify that our framework supports very good productivity, quality and maintainability to meet the user's requirements in mobile business.