• KIEAE Journal
• /
• v.10 no.4
• /
• pp.137-145
• /
• 2010

Active sunlighting systems have been applied to deliver sunlight into the indoor space where natural light is insufficient, mainly because of the congested high-rise buildings in urban areas. Among various active sunlighting systems, a mirror sunlighting system which is simple structure and economically reasonable has been widely used in different types of spaces such as underground, north facing place and atrium. This study was to evaluate the mirror sunlighting systems, which were consisted of the first mirror of $3.5m{\times}2.5m$, the eight sets of the second mirrors of $1.0m{\times}1.25m$ and a sun tracker. Ten sets of the systems were installed for 40 apartment living rooms, the configuration of $3.5m(W){\times}4.0m(D){\times}2.5m(H)$ where sunlighting were not possible due to high retaining walls located in the front of the living rooms. The 45 HOBO data logger sensors for the indoor illuminance were equipped and 2 Li-cor photometers for outdoor illuminance. Both indoor and outdoor horizontal illuminances were monitored every second from 9am to 3pm on 17 January 2010 under clear sky condition. The results showed that the indoor illuminance of installed mirror sunlighting system was significant relationship with outdoor illuminance and increased the indoor illuminance level by 4.2 times on the whole floor space, by 8 times on the sun patch space of 6m2 and even by 2 times on the no sun patch space. In addition, the luminous conditions of the living room under real sky conditions met the KS recommendation for difficult task (600-1000-1500 lux) such as sewing and reading on whole floor space and sun patch space. It was proved that the benefits of mirror sunlighting systems included an effective technology for penetrating daylight into indoors where sunlighting was not possible and improving occupants' satisfaction and health, and contributing to energy saving in apartments during daytime.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.142-149
• /
• 2015

Most of the mono-camera based lane detection systems are fragile on poor illumination conditions. In order to compensate limitations of single sensor utilization, lane information fusion system using multiple lane sensors is an alternative to stabilize performance and guarantee high precision. However, conventional fusion schemes, which only concerns object detection, are inappropriate to apply to the lane information fusion. Even few studies considering lane information fusion have dealt with limited aids on back-up sensor or omitted cases of asynchronous multi-rate and coverage. In this paper, we propose a lane information fusion scheme utilizing multiple lane sensors with different coverage and cycle. The precise lane information fusion is achieved by the proposed fusion framework which considers individual ranging capability and processing time of diverse types of lane sensors. In addition, a novel lane estimation model is proposed to synchronize multi-rate sensors precisely by up-sampling spare lane information signals. Through quantitative vehicle-level experiments with around view monitoring system and frontal camera system, we demonstrate the robustness of the proposed lane fusion scheme.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.78-86
• /
• 2008

The aim of this paper is to show the daylight environment of a light pipe system according to sun movement. A light pipe system has been mounted on the roof of the windowless full scale model: the solar spot has diameter of 0.65m and is 1.3m long, giving an aspect ratio of 1:2. The full scale model was installed on the rooftop of the SHINAN apartment in Yongin city that has no obstructions against sunlight. The test room is equipped with sensors for the measurements of the internal illuminance and has an area of 6m(W)$\times$6m(D)$\times$4m(H). The system has been monitored with a data-logger to evaluate the cumulative distribution of illuminance on a floor-plane from 16th, April to 29th, May, 2008 over one month and selected clear sky condition. For the daylight performance of floor area, the totally 49 measuring points has been used to determine the internal illuminance and an HP datalogger(HP34970A) records the measurements for one consecutive month. The horizontal external illuminance has been measured with two outdoor sensors. This paper presents the results of monitoring light pipe system with internal/external illuminance ratio and cumulative frequency distribution of floor-plane illuminance are discussed The results show that lightpipe is proficient device for introducing daylight into the building. However It provided different daylight indoor environment with wide or narrow Interquatile range of illuminance, internal/external illuminance ratio and cumulative frequency distribution according to solar positions under suuny sky condition. For more achieving the improvement of lightpipes also include energy savings, user visual comfort with various indicators; seasonal solar height, room and lightpipes geometries.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.459-464
• /
• 2010

The purpose of this study was to evaluate the physical properties of hydrophilic polyvinyl siloxane impression materials as change of material's storage temperatures. Working time, strain-in-compression, elastic recovery and consistency were tested according to ISO Standard NO. 1563. The results are as followed. 1. Working time decreased in cold storage. 2. Strain-in-compression was different in storage temperatures. Material's strain-in compression in cold temperatures were higher than in room temperature and in incubator. 3. A coefficient of elastic recovery varied by storage temperatures. The rate in cold temperature was the lowest and in incubator was the highest. 4. Consistency of impression substance different in storage temperatures. The extent in cold temperature is the highest and in incubator was the lowest. Statistical analysis(SPSS 14.0k, p>0.05) showed that storage temperature affect to material's physical properties. We recognized that the physical properties of polyvinyl siloxane impression materials were changed according to storage temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1808-1812
• /
• 2010

과거에 발생한 극한홍수에 대해 역사기록 혹은 고고학적 발견을 통해 경향성을 연구하는 것은 세계적으로 많은 관심을 가지고 수행되고 있다. 특히, 기후변화와 관련하여 시추 자료 분석에 의한 연구는 과거에도 극한홍수가 발생하였음을 보여주고 있으며, 일기와 같은 개인적인 기록물에도 이런 재해에 관한 기록이 남아 있다. 우리나라의 역사기록은 측우기의 앞선 발명과 맞물려 세계적으로 찾아보기 어려운 매우 상세한 내용을 담고 있다. 삼국사기를 비롯하여 고려사에는 그 시대에 발생하였던 주요 홍수에 대해서는 정성적인 기술이 되어 있으며, 특히 조선왕조실록에는 조선왕조가 개국된 이래로 500년간 발생한 홍수와 피해지역 및 피해규모를 자세히 기록하고 있다. 본 연구의 선행연구에서는 과거 청계천에서 관측된 측우기 기록을 이용하여 홍수수문분석을 수행한 후 과거 청계천의 극한홍수량을 산정하였다. 본 연구에서는 이러한 홍수량 산정결과를 토대로 HEC-RAS를 이용하여 과거 청계천에 대하여 각 홍수사상별 홍수위를 산정하였다. 이렇게 산정된 홍수위를 과거 역사기록상의 피해기록과 비교 분석하기 위하여 수치고도모형(DEM)의 이용으로 공간적 피해규모를 평가하고자 하였다. 모형의 입력 자료로는 하도구간 및 하천단면, 조도계수, 하상경사, 상 하류단 경계조건 등이 필요하다. 이를 위해서 과거 청계천에 대한 하천 단면자료 및 조도계수 등이 필요하나 대상지점의 과거 실측자료가 없는 바 청계천 개수계획평면종단도(1936년, 경성부), 준천사실(1760년), 동국여지비고(1870년), 조선지형도집성(1921년), 경성지적도(1912년), 청계천 유물 발굴조사보고서(2006년) 등의 고문헌을 통하여 청계천 본류 구간에 대하여 단면 입력자료를 구성하였다. 또한 실제 청계천의 주변부 피해양상을 확인하기 위하여 청계천의 지류구간에 대해서도 금천교 발굴조사보고서(2003년), 영천교 발굴조사보고서(2003년) 등의 자료와 함께 근대까지의 기록물들을 활용하여 단면 입력자료를 추정하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.43-52
• /
• 2022

Operational reliability of the single-use turbo engine for guided weapons must be guaranteed even after long-term storage. Rolling element bearings have a great influence on the operational reliability of the turbo engine, however changes in micro dimensions of bearings by an oxide layers on rolling elements and raceways may cause failures after long-term storage. In this study, changes in dimensions of bearings were measured and roughness of rolling elements was used for estimating the storage life. Storage life estimation was performed via two kinds of methods, Weibayes method and random sample generation method. The results of two methods were compared and their characteristics were analyzed. This study will contribute to establish an efficient maintenance schedule for the single-use turbo engine.

• Science of Emotion and Sensibility
• /
• v.16 no.2
• /
• pp.195-206
• /
• 2013

The main causes of traffic accidents while driving a car is of the driver's visual distraction. In this study, the color sensitivity of the information projected on the windshield were evaluated for HUD (Head Up Display) system which helps the driver's eyes on the road while driving. The driving Information were projected $9^{\circ}$ downward from front sight $0^{\circ}$ under lab's fluorescent lights, LED floorlights and the TV had having 25 [lux] illumination when driving at night environment and 100,000 [lux] of daylight environment. Munsell color hue of the basic five colors (R, Y, G, B, P) and the color of traffic lights YR, W were the color of the seven characters, each character were outlined by White, Gray except for W. Total of 19 experimental stimuli was shown in the environment of day and night driving for asking visibility information of color, fatigue, preferences, and evaluate the degree of interference. The results came out that the bright Y and G color is visibility significantly for daylight. Second, with the outline of the text, the color of the outline works as a background for luminance contrast effects and affects visibility. Third, without the outline, the glass in front of the vehicle acts as the background and the luminance contrast of characters achieve greater brightness and visibility. The luminance contrast between the stimuli and background should be considered for increasing color visibility for driving information which is an important factor for HUD commercialization.

• Journal of Environmental Impact Assessment
• /
• v.24 no.5
• /
• pp.516-531
• /
• 2015

In this study, a software module to predict the effectiveness of vegetation buffer strip (VBS) has been developed for using with Chemicals, Agricultural Management and Erosion Losses (CAMEL), a distributed watershed model. Most basic functions for the VBS module are same as CAMEL except functions newly developed to implement sedimentation enhancement by vegetation and level spreaders. For verification of the VBS module, sensitivity analyses for length, roughness, soil and vegetation type of VBS were carried out using a test grid cell. The surface discharge of sediment are highly sensitive to the roughness coefficient of VBS. The removal efficiencies of VBS for the surface discharges of sediment and TP are generally high regardless of environment changes. The surface discharges of TOC and TN are highly sensitive to the length and soil of VBS. The removal efficiencies of VBS for the surface discharges of TOC and TN are generally lower than those of sediment and TP. The newly developed VBS module reasonably simulates the removal efficiencies of surface discharges that vary according to the environment changes. It is expected that this VBS module can be used for evaluating the effectiveness of VBS-based best management practices to be applied to reduce pollution discharges from various non-point sources.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.341-353
• /
• 1995

Previous study had shown the diversities in the propriety for optimal bond strength on the concentration of the etchant. The aim of present study in vitro was to evaluate and compare the shear bond strength of orthodontic brackets to enamel and to measure the depth of etch on the phosphoric acid concentrations. A hundred and seventy six extracted bovine lower centrals were ground to yield flat surfaces and etched by the concentration $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%\;and\;85\%$ of phosphoric acid respectively during 60 seconds. The shear bond strength of orthodontic brackets, the depth of etch and surface roughness of the enamel were measured, and scanning electron microscopic observations on the etched enamel surfaces were carried out. The data obtained from the very experiments were processed and statistically analyzed and evaluated. The gradual increase in the depth of etch to enamel as the accretion of the concentration of the phosphoric acid upto $40-50\%$ and decline henceforth were manifested. The surface roughness showed no correlation with the depth of etch, yet moderate correlation with the shear bond strength of brackets. Scanning electron microscopic investigation revealed that morphological patterns of the etched enamel surfaces for $5\%\;to\;40\%$ of concentrations were even and homogenous, and those for $50\%$ as well as $60\%$ exhibited the overetched and unhomogenous. The shear bond strengths kom $10\%\;to\;60\%$ of concentration showed no statistically significant differences. It was suggested that the shear bond strengths at $5\%\;and\;70\%$ were sufficient to tolerate the force levels of the ordinary orthodontic treatment notwithstanding to be significantly lower than those from $10\%\;to\;60\%$ phosphoric acid solution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.15-22
• /
• 2012

The variation in the wind speed with height above ground is called the wind shear profile. In the field of wind resource assessment, analysts typically use one of two mathematical relations to characterize the measured wind shear profile: the logarithmic profile (log law) and the power law profile (power law). The logarithmic law uses the surface roughness as a parameter, and the power law uses the power law exponent as a parameter. The shape of the wind shear profile typically depends on several factors, most notably the roughness of the surrounding terrain and the stability of the atmosphere. Since the atmospheric stability changes with season, time of day, and meteorological conditions, the surface roughness and the power law exponent also tends to change in time. For this study, Using the observed data from Met-mast, located in Pyeongdae, Handong in Jeju. we used the matlab and windograper to calculate roughness length and the law exponents. These calculations are similar to reference the data, but they have different ranges. In the ocean case, each reference data and calculated data was the same, but the crop area is higher than the earlier studies. In addition, the agricultural village is lower than the earlier studies.