• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.331-340
• /
• 1998

본 연구에서는 이동제한장치가 있는 연속교의 지진응답특성을 고찰하였다. 일점고정연속교에 있어서 이동제한장치는 교각이 탄성거동을 하는 경우 교축방법 수평력 분산기능이 있으며 교각하부에 소성힌지가 발생하거나 내진분리베어링이 있는 경우에는 최대변위 및 비탄성거동에 따른 잔류변위제한에 매우 효과적이다. 상부구조와 이동제한장치의 충돌시 발생하는 충격력은 완충재의 사용으로 상당히 감소시킬 수 있다. 이동제한장치의 설치위치 및 이격거리는 이동제한장치가 설치될 하부구조의 강성 및 강도와 온도변화, 급제동력, 작은 지진발생시 충돌여부, 신축이음장치유간 등을 고려하여 결정되어야 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.145-154
• /
• 1998

The motion-limiting devices can be used for reducing the maximum and residual displacements of the multi-span continuous bridges with inelastic elements such as isolation bearings and plastic hinges formed in piers. For the design of motion-limiting device, the nonlinear time history analysis is required. But the time history analysis is time consuming and very complex. This study suggests the simple design procedure of the motion-limiting devices using the equivalent elastic analysis method and the acceleration-displacement spectrum concept. The suggested design procedure can be used very effectively for determining the location and gap size of the motion-limiting devices.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.9-22
• /
• 2005

The allowed operation space for the mass damper in an active tuned mass damper (ATMD) system is limited for most civil structures. In this study, a restrained stroke active tuned mass damper (RS-ATMD) system with a end-spring and a holder that reduces the stroke of the mass damper with maintaining the control effect durably is proposed. This new control system functions as a conventional ATMD within the predetermined stroke limitation under small excitation and as an RS-ATMD beyond that limitation under large excitation. A new control algorithm considering such an operation principle of the RS-ATMD are also provided. Parameteric study for the various design factors of the RS-ATMD is conducted and the control effectiveness are investigated in comparison with the ATMD. Exposed to sinusoidal or impact load, the RS-ATMD system shows the considerable reduction of the maximum stroke of the mass damper with the slight diminution in the control effectiveness. Excited by random load, it also shows the considerable reduction of the maximum stroke of the mass damper not allowing the diminution in the control effectiveness.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.593-596
• /
• 2000

제한된 화면을 갖는 메뉴는 사용자에게 한번에 보여줄 수 있는 정보의 양이 제한되기 때문에 사용자와 전자제품간 상호작용의 곤란함을 드러내고 있다. 본 연구는 선택 가능한 항목 표시방식(3수준), 메뉴이동방식(2수준), 연령(2수준)의 3가지 실험변수를 사용하여 제한된 공간을 갖는 소형시각표시장치의 사용성 향상에 관하여 연구하였다. 실험을 수행하여 제한된 메뉴표현공간에서 사용되는 계층적 메뉴를 설계할 때, 사용자에게 보다 친밀하고 사용성이 좋은 메뉴표현방식에 대한 가이드라인을 제안함과 동시에 제한된 공간상의 메뉴표현방식에 대한 기초연구자료를 제시하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.433-434
• /
• 2006

The limited slip differential(LSD) is a device which enables the driving force to be transmitted from one slipping wheel to another wheel in such case that the car is stuck in clay or snow. When the unwanted slipping occurs on one wheel, the LSD temporarily restraints the differential motion to transmit the driving force in the other wheel. So far, many types of LSD were developed such as mechanical lock type, disk clutch type, viscous coupling type, torsion type and multiple clutch type. we designed a new type of the hydraulic LSD which uses the principle of trochoid gear pump.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.180-187
• /
• 1991

차량현가장치는 주로 운행중 승차감(ride quality)을 향상시키고, 현가장치의 변위(rattle space)를 제한된 범위안에 있도록 유지시켜 주며, 조정안정성(handling performence)을 향상시켜 주는 기능을 수행한다. 승차감을 향상시켜 주기 위해서는 도로 수직입력 및 횡풍등에 의한 외란으로 부터 스프링상질량을 절연 시켜야 하며, 조정안정성을 향상시키기 위해서는 타이어와 지면과의 접촉력변화를 최소화시키면서 타이어가 도로형상을 비슷하게 추종해야 한다. 또한 스프링상 질량과 스프링하 질량과의 충돌이 없이, 또한 현가장치의 각 링크기구들도 충돌없이 일정한 공간내에서 움직여야 하므로 현가장치의 변위는 제한조건내에 존재하여야 한다.(중략)

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.4
• /
• pp.10-18
• /
• 2003

In the present study, several different types of PSD performance test systems were reviewed. Basically there are two methods to pulsate the system; whole-feeding-system pulsation and working-fluid pulsation. The latter method adopts either a piston-type pulsator or a restrict-type pulsator The working-fluid pulsation using a restrict-type pulsator was considered to be the most appropriate experimental system to study the effects of the primary parameters, and a practical design of the system was proposed.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.778-782
• /
• 2004

본 논문에서는 전력 품질 기기의 제어에 있어서 필수적 요소라고 할 수 있는 전원각을 찾는 방법중에서 PLL(Phase Locked Loop)에 관하여 기존의 방식들을 먼저 알아보고, 정상분을 추출하여 이용하는 기존의 PLL 방식을 무정전전원장치에 적합한 형태로 개선한 주파수를 제한한 PLL 방식을 제안하였다. 제안된 PLL 방식은 기존의 PI 제어기에 주파수 제한기(limiter)와 안티 와인드업(anti-windup)을 추가하였다. 이것의 기본적인 동작 원리는 기존의 방법들과 같지만, 차이점은 주파수 제한기의 삽입으로 인하여 주파수 변동률을 일정한 범위 내에서 제한할 수 있다는 것이다. 기존의 PLL 방법과 본 논문에서 제안된 주파수를 제한한 PLL 방법의 차이를 알아보기 위하여 동적 전압 보상기로 전압을 보상하는 시뮬레이션을 하였고, 결과적으로 제안된 주파수를 제한한 PLL 방법이 기존의 PLL 방법보다 UPS에 적합함을 입증하였다.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.571-579
• /
• 2014

The steel braces are used to control the lateral drift of high rise buildings. The braces are designed as tensile members since the braces consisted of slender member can not resist compressive loads by elastic buckling. To resolve this problem, a lot of research were performed to develop the non-buckling member. The force limiting device (FLD.) is one of them. The purpose of this study is the development of FLD. to prevent a elastic buckling for a slender member. The folded plate type is proposed to induce the yielding before occurring elastic buckling. In this study, member test and FEM analysis for proposed type were performed. Further, It is verified that the structure with FLD member is stable by high energy absorption. The proposed folded plate type FLD could be effective to preserve the compressive member from the elastic buckling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1086-1091
• /
• 2006

In this paper an advanced PLL strategy suitable to UPS, compared with conventional PLL strategy using the positive sequence component extracted from source voltages, is suggested. Frequency limiter and anti-windup are added to conventional PI controller in suggested PLL strategy. Basic operational principle of suggested PLL is same as that of conventional PLL, but the difference between two strategies is that the suggested PLL can limit the change of frequency in constant range because of inclusion of frequency limiter. Compute. simulation was carried fer the DVR(dynamic voltage restorer) compensating voltage to examine the difference between conventional PLL strategy and the suggested PLL strategy limiting frequency. And the results clearly demonstrate the effectiveness of the suggested PLL strategy for UPS.