• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.235-240
• /
• 2008

In case of EU and USA, a short sea shipping and coastal shipping which are safer and environmentally better than road transportation are used widely. But a share of freight transport by a coastal transportation is extremely poor in South Korea. In this paper, we propose a Mokpo-Jeju intermodal transportation based on logistics analysis results. Firstly, we investigate a freight and passenger of a Mokpo-Jeju shipping route. And secondly, the intermodal transportations such as sea-train, sea-road, RORO ship system are investigated. Finally, we propose a coastal transportation system utilizing RORO ship system for Mokpo-Jeju shipping route and identify a technical feasibility of a coastal transportation system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.810-819
• /
• 2017

The purpose of this study is to evaluate port use and the distribution of risk factors in 15 major ports in Korea, delineating the risk of each port after classifying the ports into four risk groups based on estimated risks. The placement of response vessels is then analyzed accordingly. Based on the results, danger was estimated to be especially high in ports where large-scale petrochemical facilities are located, such as Yeosu Gwangyang ports (1.85), Ulsan port (1.33) and Daesan port (1.25). The ports showing the next highest degree of danger were Pusan (0.95) and Incheon (0.83), which have significant vessel traffic, followed by Mokpo (0.71) and Jeju (0.49), which expanded their port facilities recently and saw an increase in large vessel traffic. Next is Masan (0.44), for which many fishing permits in the vicinity. When the relative ratios of each port were graded based on the Yeosu Gwangyang Ports, which showed the highest risk values, and risk groups were classified into four levels, the highest risk groups were Yeosu Gwangyang, Ulsan, Daesan and Pusan, with Incheon, Mokpo, Jeju, and Masan following. Pyeongtaek Dangjin, Pohang, Gunsan, and Donghae Mukho were in the mid-range danger group, and the low risk groups were Samcheonpo, Okgye, and Changsungpo. Among these, all response vessel placement ports specified by current law were above the mid-range risk groups. However, we can see that ports newly included in mid-range risk group, such as Mokpo, Jeju, and Donghae Mukho, were excluded from the pollution response vessel placement system. Therefore, to prepare for marine pollution accidents these three ports should be designated as additional response vessel placement ports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.93-95
• /
• 2019

일반적으로 항만 내 선박 교통류 평가는 AIS 데이터를 이용하여 수행이 되어져 왔다. AIS 데이터는 선박의 위치 확인에 용이하여 항로상 선박 교통분포 분석에 용이하였다. 하지만, AIS 데이터는 VTS에 저장되어 있는 기간이 짧고, 처리할 데이터의 양이 많은 단점이 있다. 한편, PORT-MIS 선박 입출항 데이터는 10년 이상 저장이 되어 있으며, 통항로상 통계적 선박교통밀도 분석에 활용이 용이하다. 본 연구에서는 PORT-MIS 빅데이터 분석 방법과 선박 입출항 데이터를 항로상의 통항데이터로 변환하는 방법을 개발하여 제시하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.263-264
• /
• 2023

본 연구는 자율운항선박의 실제 해상에서의 성능 검증하기 위한 실험을 진행하였다. 먼저 SAS(Samsung Autonomous System)을 활용하여 시뮬레이션을 진행하였다. 시뮬레이션은 Imazu 조우 모델을 기반으로 실험을 진행하였다. 시뮬레이션에서 조우 선박은 2-4척으로 정면, 횡단, 추월 등이 뒤섞인 상황을 가정하였다. 결과 분석은 6가지 항목(속력, Heading, Rate of Turn, Collison Risk Index, DCPA, TCPA, Closest Distance, XTD(Cross-Track Distance))을 분석하였다. 2 차례의 실해역 실험을 진행하였다. 목포-제주도 구간에서 실해역 실험을 진행 후 목포-이어도-독도 항로에서 실해역 실험을 진행하였다. 실해역 실험 결과 Imazu 모델 기반 시뮬레이션과 비슷한 결과를 보였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.161-167
• /
• 2017

This paper measured and evaluated the technical efficiency, pure technical efficiency and scale efficiency of port labor via three inputs and three outputs using Data Envelopment Analysis (DEA). First, the average overall technical efficiency measured about 94.18 %, with 100 % pure technical efficiency being larger than 94.18% scale efficiency. As a result, 7 ports were identified as efficient, and 4 ports were identified as inefficient. Among the 4 ineffiecient ports, Donghae had the highest Increasing Return to Scale (IRS). However, the inefficient ports were all found to be less efficient in terms of resource operation than production scale. On the other hand, the efficient ports established priorities using the super efficiency method. As a result, port efficiency was highest for Incheon, Mokpo, Pyeongtaek-Dangjin, Masan, Yeosu Gwangyang, Jeju, and Gunsan-Daesan Ports, in order. In particular, Busan Port, found to be inefficient, would benefit from using Mokpo Port and Incheon Port as benchmarks to increase trade volume and modernize equipment for full-scale commercialization to improve labor efficiency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.341-342
• /
• 2018

Unlike previous studies on the optimum route of the ship operating on th ocean, this study proposed an optimization method for the route planning of the ship operating on the coast. In general, passenger ships on the coast navigate along the waypoints indicated in the authorized route. Therefore this study propose objective function considering the braking power and time to determine the speed between waypoints, and the optimum speed was determined by applying the proposed method to the actual route of the passenger ship between Mokpo and Jeju.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.74-80
• /
• 2021

When a berth is built close to a fairway, a moored vessel will be affected by the ship waves generated by navigating vessels. In this study, a portable measurement system was developed to measure the roll motion of an actual vessel, and the results were compared with simulation results. The simulation results showed that the roll motion satisfies the loading safety criteria. However, the actual results of the vessel, did not satisfy the criteria in some cases. In this study, 18 cases that did not satisfy the loading safety criteria were analyzed. Among these cases, three cases were affected by a different time zone of the remaining 15 cases, 11 cases (73.3%) were observed to be consistent with arrival times of passenger ships of more than 10,000GT sailing between in Mokpo and Jeju. The results of this study can be used to reflect marine traffic characteristics in the assessment of loading safety, which can increase the reliability of results of the loading safety assessment of ships.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1018-1022
• /
• 2004

지구온난화에 의해 전세계적으로 평균해수면이 상승하고 있는데, 이는 지반의 융기 또는 침강 등을 비롯한 여러가지 지역적 차이 때문에 지역적으로 적지 않은 차이를 보이고 있다. 분석결과에 따르면 서남해안은 $1\~3mm/yr$ 정도의 비슷한 값을 보이고 있으며 제주도의 경우 $3\~5mm/yr$로 서남해안 지역에 비하여 약간 큰 값을 보이는 등 전지구적 상승량인 $1\~2mm/yr$ 보다는 다소 크게 나타나고 있다. 이와 함께 방조제와 같은 해안구조물 건설에 의해서도 평균해수면 뿐 아니라 고조위 및 저조위의 변화가 유발된다. 서남해안에서는 군산항과 목포항에서 특히 방조제 건설후에 각각 조위상승과 조석확폭현상이 발생하여 만조위 상승이 유발된 것으로 나타나고 있는데, 여기에 기인하여 목포 인근해역에서는 침식현상이 초래되고 있을 뿐 아니라 연중 해수면 변화가 심해짐에 따라 고극조위가 더욱 커져 저지대 범람이 특히 우려되고 있는 실정이다.

• Journal of Korea Port Economic Association
• /
• v.25 no.1
• /
• pp.15-28
• /
• 2009

The purpose of this paper is to show the empirical extraction way of benchmarking ports for overcoming the shortcoming which the traditional DEA method has by using 20 Korean ports in 2003 for 2 inputs (birthing capacity, cargo handling capacity) and 2 outputs(Export and Import Quantity, Number of Ship Calls). Because DEA method has produced the limited set of efficient units which are reference to inefficient units respective of their differences in efficiency scores, it is necessary to adopt the more feasible benchmarking information according to the path analysis(tier or stratification). The core empirical results of this paper are as follows. Benchmarking ports against inefficient ports according to the tier analysis are that Masan Port(Janghang$\rightarrow$Jeju$\rightarrow$Seogoipo$\rightarrow$Yeosu), Jinhae Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando), Pohang&DonghaePort(Janghang$\rightarrow$Samcheonpo$\rightarrow$Pyungtag$\rightarrow$Samcheog), and Sogcho Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando). The policy implication to the Korean seaports and planners is that Korean seaports should introduce the new methods like Tier analysis of this paper for evaluating the port performance and enhancing the efficiency in short term, mid term, and long term according to the tier 3 stage, the tier 2 stage, and the tier 1 stage with original DEA stage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.38-39
• /
• 2019

Optimal route planning is the route planning to minimize voyage time or fuel consumption in a given ocean environment. Unlike the previous studies on weather routing, this study proposes an optimization method for the route planning to avoid the grounding risk in the coast. The route way-points were searched using Dijkstra algorithm, and then the optimization was performed to minimize fuel consumption by setting the optimization design parameter to the engine rpm. To set the engine rpm, a method to use the fixed rpm from the departure point to the destination point, and a method to use the rpm for each section by dividing the route were used. The ocean environmental factors considered for route planning were wind, wave, and current, and the depth information was utilized to compute grounding risk. The proposed method was applied to the ship passing between Mokpo and Jeju, and then it was confirmed that fuel consumption was reduced by comparing the optimum route and the past navigated route.