• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.363-367
• /
• 2022

Transparent ZnO/Ti/ZnO (ZTZ) tri-layered films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate. The thickness of the ZnO and Ti films was kept at 50 and 10 nm to consider the effect of the electron irradiation on the crystallization and optoelectrical properties of the films. From the XRD spectra, post-depostion electron irradiated films showed the characteristic peaks of ZnO(002) and Ti(200), respectively. the observed grain size of the ZnO(002) and Ti(200) enlarged up to 18.27 and 12.16 nm at an irradiation condition of 750 eV. In the figure of merit which means an optoelectrical performance of the films, as deposited films show a figure of merit of 2.0×10^-5 𝛺^-1, while the films electron irradiated at 750 eV show a higher figure of merit of 5.7×10^-5 𝛺^-1.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.29-33
• /
• 2002

종자결정성장법은 단결정형 YBCO 초전도체를 제조하기에 매우 유용한 방법이다. 이 방법은 YBCO 성형체 위에 Sm123나 Nd123 종자를 올려놓고 용융 열처리하여 초전도 결정을 특정한 방위로 성장하게 하는 방법이다. 그러나 이 공정의 단점은 초전도체의 결정성장속도가 매우 느리기 때문에 전체공정시간이 길다는 것이다. 이를 개선하고자 본 연구에서는 성형체 위에 같은 결정방위를 갖는 여러 개의 종자들을 동시에 올려 놓고 열처리하여 단결정형 초전도체의 제조시간을 단축하고자 하였다. 이 공정을 다중종자결정성법이라 명명하였으며, 이 공정의 적용으로 공정시간을 상당히 단축할 수 있음을 증명하였다. 본 연구에서는 초전도체의 결정 성장과정, 종자의 갯수와 공정시간의 관계, 종자에서 생성, 성장된 결정들이 만드는 결정입계특성 동에 대해 논의하였다.

• 베이커리
• /
• no.2 s.415
• /
• pp.172-174
• /
• 2003

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.219-226
• /
• 2018

IIoT(Industrial Internet of Thing) means that all manufacturing processes are informed beyond the conventional automation of process automation. The objective of the system is to build an information system based on the data collected from the sensors installed in each process and to maintain optimal productivity by managing and automating each process in real time. Data collected from sensors in each process is unstructured and many studies have been conducted to collect and process such unstructured data effectively. In this paper, we propose a system using Node-RED as middleware for effective big data collection and processing.

• 기계와재료
• /
• v.21 no.2
• /
• pp.122-135
• /
• 2009

타이타늄은 경량성, 고강도성, 내화학성, 인체친화성, 내환경성 등의 물성을 이용하여 다양한 산업분야에 활용되고 있다. 다양한 산업분야에 정형부품으로 타이타늄을 가공하는 기술 중에서 가장 경제성이 높은 분야로 주조공정을 들 수 있다. 주조공정으로 부품을 제조하면 복잡한 형상을 기계가공하지 않고 거의 정형으로 제조할 수 있으며, 기계적 물성 또한 단조품에 버금가는 제품을 생산할 수 있다. 또한 다량의 제품을 생산할 수 있기 때문에 경제성에서도 유리하다. 이와 같은 주조품을 제조하는데는 진공에서 불순물의 유입을 최소화 할 수 있는 특수용해공정과 주형과의 반응을 최소화 할 수 있는 주형재료와 주조방안이 필수적이다. 본 고에서는 반응성이 높은 타이타늄을 용해하는 기술과 주형과의 반응이 최소활 될 수 있는 주형재료의 선정, 그리고 실 제품에 활용하기 위한 다양한 후처리 기술에 대하여 요약하였다.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2002.11a
• /
• pp.147-150
• /
• 2002

• Information Display
• /
• v.25 no.2
• /
• pp.23-28
• /
• 2024

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.34-34
• /
• 2003

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.95-106
• /
• 2014

The outer surfaces of free form buildings contain panels with two-directional curvatures. To construct these panels, complex geometric surfaces should be divided into forms and sizes that can be manufactured and constructed efficiently. Because the bigger the curvatures of these panel, the more expensive the construction costs, these complex curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures, which is called panel optimization. Small construction and design companies have trouble in calculating even rough estimate and cannot adjust expected construction cost of the panels based on comparison of design alternatives in conjunction with panel optimization process due to lack of knowledge and experience. This study conducts the research that can support designers' cost decision-making in the design stage of the free form buildings with respect to the panel optimization process. A 3D commercial application specialized to modeling free form shapes is used for the purpose.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2096-2103
• /
• 2002

Cold ironing, as a post-forging operation of warm forged gears, needs a clear understanding of form errors due to die-elasticity and springback of component. In order to simplify the analysis of cold ironing, a single tooth instead of a whole gear component was investigated. The influence of initial surface roughness, die design, and die/workpiece interference has been examined experimentally and numerically. As a result the changes in geometrical profile, dimensions, and surface finish in a single tooth were observed. This study demonstrates that predicted dimensions can be achieved and surface finish also can be greatly improved.