Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

Development of the Preliminary Cost Estimate Method for the Free-Form Building Facade Trade in Conjunction with the Panel Optimization Algorithm Process

곡면 최적화 알고리즘을 활용한 비정형 건축물 외장공사비 개산견적에 관한 연구

  • Received : 2014.04.09
  • Accepted : 2014.05.20
  • Published : 2014.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

The outer surfaces of free form buildings contain panels with two-directional curvatures. To construct these panels, complex geometric surfaces should be divided into forms and sizes that can be manufactured and constructed efficiently. Because the bigger the curvatures of these panel, the more expensive the construction costs, these complex curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures, which is called panel optimization. Small construction and design companies have trouble in calculating even rough estimate and cannot adjust expected construction cost of the panels based on comparison of design alternatives in conjunction with panel optimization process due to lack of knowledge and experience. This study conducts the research that can support designers' cost decision-making in the design stage of the free form buildings with respect to the panel optimization process. A 3D commercial application specialized to modeling free form shapes is used for the purpose.

비정형 건축물의 건설에서 가장 어려운 공정은 복잡한 디자인으로 이루어진 외장패널을 제작 및 시공하는 것이다. 설계자는 비정형 건물의 부드러운 곡면형태를 훼손하지 않는 범위 안에서 복잡한 곡면을 갖는 패널의 양을 축소하여 패널제작 및 시공비용을 최적화함이 필요하다. 특히 설계초기단계에서 다양한 건축외관을 디자인하고 각 설계대안의 예상공사비를 추정하면서 설계의도를 충족하는 적절한 대안을 찾는 것은 대단히 중요하다. 하지만 대부분의 설계사무소들은 비정형 건축물의 패널최적화에 대한 이해, 기술 및 데이터가 부족하여 초기설계 단계에서 예상공사비 산정, 설계 대안 비교를 통한 예상공사비 조정등의 업무를 효과적으로 수행하지 못하고 있는 실정이다. 본 연구는 비정형 건축물 설계자가 쉽게 접할 수 있는 범용 어플리케이션을 이용하여 비정형 건축물의 외장패널을 최적화하는 방법을 제시하며 최적화 결과와 국내 비정형 건설프로젝트의 외장공사에 대한 실적공사비를 접목하여 최적화 진행에 따른 공사비 변화정도를 산출하는 방법을 제시한다. 연구결과의 적용성을 검증하기 위해 국내에서 최근 완공된 비정형 건축프로젝트의 사례연구를 수행한다.

Keywords

References

  1. An, J., Y. (2011). "A Study on the Lessons Learned for Improving Efficiency of Free-Form Facade Construction", Seoul National University Of Science And Technology, Korea, pp. 22-35.
  2. An, J, Y., Jang H, S., and Ock, J, H. (2010). "A Study on the Development of the Cost Estimation Standard through the Analysis of the Typical Free-Form Buildings Facade Elements", Proceedings of KICEM Annual Conference, KICEM, 13, pp. 351-353.
  3. Ahn, Y. J., Kim, H. O., and Lee, K. Y., (1998). "G1 Arc Spline Approximation of Quadratic Bezier Curves", Computer-Aided Design, 30(8), pp. 615-620. https://doi.org/10.1016/S0010-4485(98)00016-5
  4. Han, Z. Y. (2011). "A Study on Classification and Feature of Double-curved Surface Fabrication Techniques in Freeform Architecture, Sejong University, Korea, pp. 39-46.
  5. Kim, S. W. (2009). "Classification and Optimization of IrregularShaped Building Panels by Fabrication Methods", Yonsei University, Korea, pp. 27-33.
  6. Kwen, S. H., Shim, H. W., and Ock, J. H. (2011). "A Study on the Problem Analysis and Quality Improvement in Fabricating Free-Form Buildings Facade Panels through Mock-up Panels Production", Korean Journal Of Construction Engineering And Management, KICEM, 12(3), pp. 11-21. https://doi.org/10.6106/KJCEM.2011.12.3.11
  7. Lim, J. S. (2013). "A Study on the Cost Estimates for Optimization in the Design Phase Free-Form Building Facade", Seoul National University of Science and Technology, Korea, pp. 1-2.
  8. Les A. Piegl and Wayne Tiller (2002). "Biarc Approximation of NURBS Curves", Computer-Aided Design, 34, pp. 807-814. https://doi.org/10.1016/S0010-4485(01)00160-9
  9. Moon, S. W. (2010). "A Study on the Designs Systemization of Architecture Using Parametric Technology", Ajou University, Korea, pp. 23-27.
  10. Oh B. S. (2012). "Dongdaemun Design Plaza & Park External Panel System", Presentation Material Of Buildingsmart Association CM Contest.
  11. Park, G. (2009). Presentation Material Of SCEA Lecture Of Seoul National University Of Science And Technology
  12. Xunnian T., and Guozhao W. (2001). "Planar Point Set Fairing and Fitting by Arc Splines", Computer-Aided Design, 33, pp. 35-43. https://doi.org/10.1016/S0010-4485(00)00059-2
  13. Rhino User's Guide, (Apr. 01, 2013)
  14. Wikipedia , (Jan. 12, 2013)
  15. Jeongok Prehistory Museum, (Jan. 12, 2013)
  16. Wikipedia, (Jan. 12, 2013)
  17. Seoul Design Foundation, (Jan. 12, 2013)