• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.173-180
• /
• 2001

이방압밀이 실트질모래의 정적재하에 의한 유동파괴거동에 미치는 영향을 연구하기 위하여 비배수삼축압축시험을 수행하였다. 이를 위하여 상대밀도가 약 17%인 공시체를 습윤다짐방법에 의해서 성형하고 4가지의 압밀응력비, 1.0, 0.7, 0.55, $K_{o}$ 로서 압밀시켰다. 시험결과로서 정상상태선은 p-q 공간상에서 압밀응력비에 관계없이 유일한 직선이며 collapse line의 기울기는 압밀응력비가 증가함에 따라 선형적으로 감소한다는 사실을 보여준다. 또한, 유동파괴거동을 보이는 느슨하게 다져진 실트질모래의 잔류강도($S_{us}$ )와 첨두강도($S^{p}$ )와의 관계는 압밀응력비의 크기에 관계없이 $S_{p}$ /$p_{c}$ = $A_{L}$ +$B_{L}$ ($S_{us}$ /$p_{c}$ )로 표현되는 일반식으로 나타낼 수 있으며 계수 $A_{L}$ 및 $B_{L}$은 압밀응력비의 크기에 따라 선형적으로 변하는 경향을 나타낸다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.151-163
• /
• 2006

This paper presents the interrelationship between undrained static and cyclic shear behavior. Laboratory works were performed through the undralned static and cyclic triaxial test using Nak-Dong River sand. And static triaxial test involved the triaxial extension test for comparison with cyclic shear behavior Cyclic triaxial test was performed with a variety of combination conditions of initial static shear stress $(q_{st})$ and cyclic stress $(q_{cy})$. In this result, the stress path of cyclic shear behavior was correspondent with static shear behavior passing the critical stress ratio (CSR) line because of the development of flow deformation. After that, a failure occurred according to failure line (FL) of static shear behavior. The stress path of cyclic shear behavior showed essentially the same with static shear behavior, although it appears a little different in test method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.723-733
• /
• 2011

A numerical method of the CSF(Continuum Surface Force) model is presented for the calculation of the surface tension force and implemented in an in-house solution code(PowerCFD). The present method(code) employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with volume capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The application of the present method to a 2-D liquid drop problem is illustrated by an equilibrium and nonequilibrium oscillating drop calculation. It is found that the present method simulates efficiently and accurately surface tension-dominant multiphase flows.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.469-474
• /
• 1998

이상 유동 지배 방정식에 두 상의 경계면 두께 개념을 도입하여 액체 내부에서의 기포 거동에 대한 동적 안정성을 이론적으로 해석하였다. 현재까지 기포의 안정성은 실험과 거시적인 물리적 이론에 의하여만 정적으로 연구되어 왔으나, 상간의 압력 불연속성을 표면장력 모델링을 이용하여 해석적으로 해결 함으로서 기포 안정성에 대한 정량적인 분석을 가능하게 하였다. 그 결과 기포의 안정성은 기존의 무차윈 Weber수 이외에 Reynolds수 그리고 유체의 점성력과 Capillary파와 관련된 무차원 수에 의해서도 영향을 받는 것으로 밝혀졌다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.143-151
• /
• 1996

Structural reaction injection molding을 이용한 복합재료의 제품 셩형을 위한 모델링 전략을 설명하였다. 사용된 모델은 두 평행한 원판형 mold에 있는 불 균일한 온도조건의 fiber preform을 통과하는 reactive srsin의 방사형 유동을 시뮬레이션 한다. 이러한 모델은 중요한 작동인자와 공정인자(주입온도, mold의 온도, 유량, cavity의 두께와 섬유의 조밀도)등이 유동속도, 변화(monomer, radical, inhibitor) 및 온도분포 등에 미치는 영향을 예견한다. 열전달과 질량전달 및 화학반응을 고려하여 모델을 개발하였다. 중요한 공정인자를 평가하기 위한 효울적인 공정창( process window)을 제공하는데 본 연구의 목적을 두었다. 2차원적인 Lagrangian 방식에 1차원적인 유동과 제한적인 2차원 열전달을 가정하여 모델을 유도하였고, 방정식은 implicit difference scheme에 의해 전개하였다. 이 모델은 Gonzalez-Romero의 실험 결과와 비교함에 의해 확인되었고, 실험결과가 잘 일치함을 보였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.877-880
• /
• 2017

Impeller blades in the centrifugal compressor are subjected to static loads due to the high-speed rotation and steady aerodynamic forces. At the same time, aerodynamic excitations by the interaction between the impeller and the diffuser vanes(DV) periodically excite the impeller blades in resonant conditions, which may lead to high cycle fatigue (HCF) and eventually result in failure of the blades. In order to predict the structural response accurately, the aerodynamic excitation and the major resonant conditions were predicted by performing the unsteady flow analysis and modal analysis using ANSYS. Next, a unidirectional forced vibration analysis was performed by using fluid-structure interaction (FSI) method, and the safety of HCF was evaluated based on the results.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.59-60
• /
• 2019

WCS에서 AGV의 스케줄링과 동적, 정적 장애물 인식 및 충돌 회피문제는 오래전부터 다뤄져 온 중요한 문제이다. 본 논문에서는 위의 문제를 해결하기 위해 Lidar 센서를 중심으로 다양한 데이터를 기반으로 한 강화학습 시스템을 제안한다. 제안하는 시스템은 기본의 명시적인 알고리즘에 비해 다양하고 유동적인 환경에서 경로 계획과 동적 정적 장애물을 인식하고 안정적으로 회피하는 것을 확인하였으며 산업 현장에 도입 가능성을 확인하였다. 또한 강화학습의 적용 범위, 적용 방안과 한계에 대해서 시사한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.243-249
• /
• 2010

The improvement of fuel economy and the reduction of diesel exhaust PM(Particulate Matter) and $NO_X$ have been successfully achieved by supplying diesel engines with emulsified diesel oil. However, combustion analysis of emulsified C-heavy oil is difficult because the combustion characteristics of emulsified C-heavy oil compared to other fuels have a special form. Therefore, these experimental researches have analyzed the combustion characteristics of emulsified C-heavy oil in a chamber with high pressure and temperature. The pressure and the rate of heat releases in a combustion chamber was decreased with increasing the water content and the ignition delay time was increased with increasing the water percent.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.1-8
• /
• 2006

A steady prediction method is presented to compute dynamic damping coefficients for axisymmetric projectiles. Viscous flow analysis is essential to the steady method using a zero-spin coning motion in the inertial coordinate frame. The present method is applied to compute the pitching moment and the pitch-damping moment coefficients for the Army-Navy Spinning Rocket. The results are in good agreement with the parabolized Navier-Stokes data, range data, and unsteady prediction data. Predictions for Secant-Ogive-Cylinder configurations are performed to investigate effects of afterbody geometries. To investigate the geometrical effect and flow physics, the longitudinal developments of the coefficients are examined in detail.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.120-129
• /
• 1995

Since the rate and completeness of combustion in direct injection engines were controlled by the characteristics of gas flow fields and sprays, an understanding of those was essential to the design of the direct injection engines. In this study the numerical simulations of swirl effects on the characteristics of gas flow fields and sprays were performed using the spray model that could predict the interactions between gas fields and spray droplets. The governing equations were discretized by the finite volume method and the modified k- e model which included the compressibility effects due to the compression/expansion of piston was used. The results of numerical calculation of the spray characteristics in the quiescent environment were compared with the experimental data. There were good agreements between the results of calculation and the experimental data, except in the early stages of spray. In the motoring condition, the results showed that a substantial air entrainment into the spray volume was emerged and hence the squish motion was relatively unimportant during fuel injection periods. As the swirl ratio increased, the evaporation rate was increased due to the wide dispersion of the spray droplets and the strong interaction between spray droplets and gas fields.